"p28 base 750 watt lamp"

Electronic Ballast, Fluorescent, Input Voltage: 120-277V, Programmed Start, Centium Series, 4-Lamp, For use with the following Linear Lamp Types: F54T5/HO, 36w, 50w, & 55w 2G11 base lamps.

Category: High Output Electronic Fluorescent Ballasts

Electronic Ballast, Fluorescent, Instant Start, 4-Lamp, Lamp Wattage: 32, 120-277 Volt, Lamp Type: F32T8, Ballast Factor: 0.77

Category: T8 Electronic Fluorescent Ballasts

Electronic Ballast, Fluorescent, Input Voltage: 120-277V, Instant Start, Optanium Series. For use with the following Linear Lamp Types: (2 or 3) F32T8 (32W) or F32T8/ES (25W & 28W). Will also run F17T8 and F25T8 lamps.

Category: T8 Electronic Fluorescent Ballasts

Reduced Profile Emergency Ballast: High Efficiency Performance meets CA T20 battery charger efficiency standards; Input Voltage (Universal) 120-277V, 50/60Hz, Input Wattage 3.7 Watts, Lamps Operated: Most 2'-4' single, bipin T8 HO and VHO and 2'-4' 14W to 54W T5 fluorescent lamps, Emergency Operation* (1) 2'-4' 90 minutes, Initial Illumination (1) lamp up to 1350 lumens. For a complete list of acceptable LED retrofit tube options, refer to the IOTA LED Retrofit Tube Reference Chart at: www.iotaengineering.com/IOTA-LED-Retrofit.pdf Acuity Ci Code: *26587P

Category: Emergency Fluorescent Ballasts

13, 30 or 40 Watt, Fluorescent Starter, FS-4.

Category: Fluorescent Starters

Electronic Ballast, Fluorescent, Input Voltage: 120-277V, Instant Start, Centium Series. For use with the following Linear Lamp Types: (1 or 2) F17T8, F25T8, or F32T8 (25, 28, or 32w), FB32T8 (U-Bent) lamps. Or (1) F40T8. (35I = Individual packaging)

Category: T8 Electronic Fluorescent Ballasts

Electronic Ballast, Fluorescent, Input Voltage: 120-277V, Instant Start, Centium Series. For use with the following Linear Lamp Types: (3 or 4) F17T8, F25T8 or F32T8. Or (3) F40T8 lamps.

Category: T8 Electronic Fluorescent Ballasts

Electronic Ballast, Fluorescent, Input Voltage: 120-277V, Instant Start, Centium Series. For use with the following Linear Lamp Types: (2 or 3) F17T8, F25T8 or F32T8 or (2) F40T8.

Category: T8 Electronic Fluorescent Ballasts

Electronic Ballast, Fluorescent, Instant Start, 2-Lamp, Lamp Wattage: 32, 120-277 Volt, Lamp Type: F32T8, Ballast Factor: 0.77

Category: T8 Electronic Fluorescent Ballasts

Electronic Sign Ballast, Fluorescent, Input Voltage: IntelliVolt operation; 120V to 277V, Instant Start, SignPro Series. For use with any 1 to 4 lamp T12HO lamps up to 8 feet long, 4 feet to 32 feet total length. For use with any 1 to 4 lamp T8HO lamps up to 6 feet long, 4 feet to 24 feet total length. For use with T12HO / T8HO lamps or any combination of lamps in circuit as long as total length per circuit does not exceed 7 feet for T12HO and 5 feet for T8HO. *** NOTE: Fixture/Lamp Holders may need to be rewired! See cut sheet wiring diagram ***

Category: Electronic Fluorescent Sign Ballasts

Electronic Sign Ballast, Fluorescent, Input Voltage: IntelliVolt operation; 120V to 277V, Instant Start, SignPro Series. For use with any 1 to 2 lamp T12HO lamps up to 8 feet long, 2 feet to 16 feet total length. For use with any 1 to 2 lamp T8HO lamps up to 6 feet long, 4 feet to 12 feet total length. For use with T12HO / T8HO lamps or any combination of lamps in circuit as long as total length per circuit does not exceed 7 feet for T12HO and 5 feet for T8HO *** NOTE: Fixture/Lamp Holders may need to be rewired! See cut sheet wiring diagram ***

Category: Electronic Fluorescent Sign Ballasts

Electronic Sign Ballast, Fluorescent, Input Voltage: IntelliVolt operation; 120V to 277V, Instant Start, SignPro Series. For use with any 4 to 6 lamp T12HO lamps up to 8 feet long, 8 feet to 48 feet total length. For use with any 4 to 6 lamp T8HO lamps up to 6 feet long, 16 feet to 36 feet total length. For use with T12HO / T8HO lamps or any combination of lamps in circuit as long as total length per circuit does not exceed 7 feet for T12HO and 5 feet for T8HO.. *** NOTE: Fixture/Lamp Holders may need to be rewired! See cut sheet wiring diagram ***

Category: Electronic Fluorescent Sign Ballasts

Electronic Ballast, Fluorescent, High Output, Rapid Start, 2-Lamp, Lamp Wattage: 110, 120 Volt, Lamp Type: F96T12HO, Ballast Factor: Normal

Category: High Output Electronic Fluorescent Ballasts

Electronic Sign Ballast, Fluorescent, Input Voltage: IntelliVolt operation; 120V to 277V, Instant Start, SignPro Series. For use with any 1 to 4 lamp T12HO lamps up to 10 feet long, 10 feet to 40 feet total length. For use with any 1 to 4 lamp T8HO lamps up to 8 feet long, 8 feet to 32 feet total length. For use with T12HO / T8HO lamps or any combination of lamps in circuit as long as total length per circuit does not exceed 9 feet for T12HO and 7 feet for T8HO. *** NOTE: Fixture/Lamp Holders may need to be rewired! See cut sheet wiring diagram ***

Category: Electronic Fluorescent Sign Ballasts

Electronic Dimming Ballast, Fluorescent, Input Voltage: 120-277V, Programmed Start, Mark 7 0-10V Series. For use with the following Linear, 2-Lamp, Lamp Types: (2) FC12T5/HO, (2) F54T5/HO, (2) F54T5/HO/49W or (2) FT55W/2G11.

Category: Electronic Dimming Fluorescent Ballasts

Electronic Step-Dimming Ballast, Fluorescent, Programmed Start, 2-Lamp, Lamp Wattage: 32, 120-277 Volt, Lamp Type: T8

Category: Electronic Step-Dimming Fluorescent Ballasts

Electronic Ballast, Fluorescent, Input Voltage: 120-277V, Programmed Start, Centium Series. For use with the following Circline, Compact, Linear Lamp Types: (1 or 2) F54T5/HO, (1 or 2) F54T5/HO/ES (49W), (1 or 2) F58T8, (1 or 2) FC12T5/HO, (1 or 2) FT36W/2G11, (1 or 2) FT50W/2G11 or (1 or 2) HT55W/2G11. ***NOTE*** Advance changed from 16.70" Overall Length to 14.17" O.L. ***

Category: High Output Electronic Fluorescent Ballasts

Electronic Ballast, Fluorescent, Input Voltage: 120-277V, Instant Start, Centium Series. For use with the following Linear Lamp Types: (1) F17T8, (1) F25T8, (1) F32T8 or (1) F32T8/ES (30W).

Category: T8 Electronic Fluorescent Ballasts

Electronic Ballast, Fluorescent, Input Voltage: 120-277V, Rapid Start, Centium Series. For use with the following Linear Lamp Types: (1 or 2) F30T12, F34T12/F40T12 or FB34T12/FB40T12.

Category: T12 Electronic Fluorescent Ballasts

Electronic Ballast, Fluorescent, Input Voltage: 120-277V, Programmed Start, Centium Series. For use with the following Linear Lamp Types: (3 or 4) FT36W/2G11, (3 or 4) F54T5/HO/ES (49W), (3 or 4) FT50W/2G11, (3 or 4) F54T5/HO. See cut sheet for special wiring options.

Category: High Output Electronic Fluorescent Ballasts

Emergency ballast for Fluorescent and Type A TLED lamps. Input Voltage: 120/277V, 90 Minute Illumination Time up to 1400 lumens, 24 Hr Recharge. For use with the following Compact, Linear, U-Bent & Circline Fluorescent Lamp Types: (1-2) 17 - 40W, 2’ - 4’, T8, T9, T10 or T12 fluorescent lamps, (1) 4-pin, 2G11, 18 - 55W long compacts, (1) 4-pin, G24q/Gx24q, 13 - 42W CFL, (1) T5/T5HO, BiPin or Circline, 14 - 55W, (1) 4-pin, GR10q, 16 - 55W 2D and Compatible with 7 - 16.5W Type A TLED lamps (including LED T8 InstantFit). Meets CEC Title 20 efficiency standards. Includes 2W-ITS (2-wire Illuminated Test Switch).

Category: Emergency Fluorescent Ballasts

Electronic Ballast, Fluorescent, Input Voltage: 120-277V, Programmed Start, Centium Series. For use with the following Circline, Compact, Linear Lamp Types: (See cut sheet for lamp compatibility)

Category: T5 Electronic Fluorescent Ballasts

Electronic Emergency Ballast with Backup Battery and Charger, MVolt Series, 120-277V, For Use With: 1100-1400 Lumen Compact & Linear Fluorescent Lamp Types: (1) 17-215W, 2-8 ft Or (2) 17-40W 2-4 ft T8, T9, T10 or T12 lamps or (1) 18-55W or (2) 18-39W, 4-Pin Long Compact.

Category: Emergency Fluorescent Ballasts

Electronic Ballast, Fluorescent, Input Voltage: 120-277V, Programmed Start Parallel, Optanium Series. For use with the following Linear Lamp Types: (1 or 2) F17T8, F25T8, or F32T8 (25, 28, or 32W) lamps.

Category: T8 Electronic Fluorescent Ballasts