Splicing & Terminating Kits

Resin Splice Kit, In-Line, Non-Shielded, Conductor Range: 10 AWG - 2 AWG, Maximum Conductor O.D.: 0.750", Maximum Connector O.D.: 0.406". For use with 1 kV to 5 kV Non-Shielded Conductors.

Category: Non-Shielded Resin Splices

Silicone Grease, 5.3 Ounce Tube, for Loadbreak Apparatus Connectors

Category: Loadbreak / Deadbreak Accessories

7 to 10 Inch Section UF Cable Type; Heat Shrink Tube, Waterproof Splice, Connector, UF Cable Contents; UL Approval; 11.5 Inch Mechanical Connector Connector Type; 600 V Voltage Rating; 14 to 8 AWG Conductor Size; For Direct Burial

Category: Low Voltage Heat Shrink Splice Kits

Splice Kit, Heat Shrink, 600V, Conductor Range: 14 AWG - 8 AWG. Provides Abrasion Resistance and Moisture Ingress for 14/3 without ground thru 8/3 with ground in Direct Burial Applications.

Category: Low Voltage Heat Shrink Splice Kits

Scotchcast™ Inline Resin Power Cable Splice Kit 82-A2N, 2-3/0 AWG, 1 Per box, 10 Per Case

Category: Non-Shielded Resin Splices

Resin, Flame Retardant Compound. Resin is a 2-Part Epoxy Insulating and Encapsulating Resin. For use to Replace the Jacket when Splicing or Repairing Mine Portable Cable and Secondary Underground Splices.

Category: Insulating & Sealing Compound

Splice Kit, Cold Shrink, 15 kV, Works with Various Types of Shielded Cables, Conductor Range: 2 AWG - 4/0 AWG. Cable Insulation Range Size: 0.64" - 1.01". Connector Requirements: Minimum O.D.: 0.40", Maximum O.D.: 1.06", Maximum Length: AL/CU 4.5", Copper 5".

Category: Medium Voltage Cold Shrink Splice Kits

215LB403B Loadbreak Kit with Compression Lug, 200A, 15 kV

Category: Loadbreak / Deadbreak Accessories

Re-Enterable Insulating & Sealing Compound, Size D, 21.2 Ounce, 40.6 Cubic Inches. For Use After Re-Entering

Category: Insulating & Sealing Compound

Splice Kit, Cold Shrink, 15 kV, Works with Various Types of Shielded Cables, Conductor Range: 4/0 AWG - 500 MCM. Cable Insulation Range Size: 0.84" - 1.38", Connector Requirements: Minimum O.D.: 0.69", Maximum O.D.: 1.38", Maximum Length: AL/CU 5", Copper 5.75".

Category: Medium Voltage Cold Shrink Splice Kits

Resin Splice Kit, Wye-Resin, Maximum Conductor: 1/0 AWG (Split Bolt), 2/0 AWG (Crimped), Maximum Run Conductor O.D.: 0.500 - 0.812", Maximum Tap Conductor O.D.: 0.375". Includes Mold Body, Pouring Spout, Electrical Tape 23, 3M Resin.

Category: Non-Shielded Resin Splices

Easy-Splice Gel Stub Splice Kit with Connector, (Hole A) - 14-2/0 AWG - (Hole B) - 6-14 AWG, 1000 Volt, White

Category: Low Voltage Gel Filled Splice Kits

Protective Cap, 200A, 15kV, For Loadbreak Reducing Tap

Category: Loadbreak / Deadbreak Protective Caps

3M Deadbreak Equipment Connection Base Kit 625E-B1, 600A, 15/25 kV, 1 Kit/Box

Category: T-Body Deadbreak Connectors

Insulation Piercing Connector, Main Conductor Range: 8 AWG - 1/0 AWG, Tap Conductor Range: 10 AWG - 2 AWG, Voltage: 600V, Copper Current Rating: 190 Amp, Aluminum Current Rating: 150 Amp.

Category: Splices - Insulation Piercing

Insulation Piercing Connector, Main Conductor Range: 8 AWG - 1/0 AWG, Tap Conductor Range: 8 AWG - 2 AWG, Voltage: 300V, Copper Current Rating: 130 Amp, Aluminum Current Rating: 100 Amp, Bolt Head Size: 1/2".

Category: Splices - Insulation Piercing

Easy-Splice Push On Gel Stub Splice Kit, 8 - 2 AWG

Category: Low Voltage Gel Filled Splice Kits

Splice Kit, Motor Lead Pigtail Type, Feeder Cable Range: 2/0 AWG - 1/0 AWG, Motor Lead Range: 4 AWG - 1/0 AWG. Voltage Range: 5-8KV, Connection Type: 2-Hole Lug (Pigtail). Includes: 3 Packs of Cleaning Pads. ***Kit will make (3) Splices***

Category: Medium Voltage Motor Lead Splice Kits

Splice Kit, Motor Lead Pigtail Type, Feeder Cable Range: 1/0 AWG - 250 MCM, Motor Lead Range: 2 AWG - 250 MCM. Voltage Range: 5kV or 8.7 kV, Connection Type: 2-Hole Lug (Pigtail). ***Kit will make (3) Splices***

Category: Medium Voltage Motor Lead Splice Kits

Insulation Piercing Connector, A Main Conductor Range: 8 AWG - 1/0 AWG, Tap Conductor Range: 8 AWG - 2 AWG., Voltage: 600V, Copper Current Rating: 190 Amp, Aluminum Current Rating: 150 Amp, Bolt Head Size: 1/2".

Category: Splices - Insulation Piercing

Easy-Splice Push On Gel Stub Splice Kit 250 - 500 MCM Quickly and conveniently insulate, seal and protect sub splice connections up to 1,000 Volts. The robust yet compact design is engineered to handle the harsh environment of motor and many other connection applications (including street lights). Specially formulated material provides excellent abrasion resistance, insulation value, and UV resistance. Each cap size is designed to fit a wide range of cable sizes. The expandable design keeps the cap as small as possible allowing it to expand only as much as needed to fit. Rated 105¦C. cULus listed. The kit includes one gel filled cap, one cap clamp, and one phase separator. The kits include three of each one per phase. INSTALLATION: GSS connector kits provide the fastest installation. Simply slide the cover down over the connection and snap the clamp closed. Sealant gel is already in the cap.

Category: Low Voltage Gel Filled Splice Kits

Insulating Resin, Material: Two-Part Polybutadiene, 12.3 Ounces, For Use in Sealing/Insulating/Mechanical Protection

Category: Insulating & Sealing Compound

Motor Stub Splice Insulator 350 AWG - 500 kcmil, Bolt Max Length 1-3/4 inch

Category: Low Voltage Motor Lead Splice Kits

Deadbreak AL Compression Lug 27Al, 4/0, 600A, 1/Box

Category: Loadbreak / Deadbreak Crimp Connectors