Low Voltage Heat Shrink Splice Kits

Splice Kit, Heat Shrink, 600V, Conductor Range: 14 AWG - 8 AWG, Tubing Size: 1.1" x 8.0". For use with 14/3 with and without ground thru 8/3 without ground in Direct Burial Applications.

Category: Low Voltage Heat Shrink Splice Kits

Splice Kit, Heat Shrink, 600V, Conductor Range: 8 AWG - 4 AWG, Tubing Size: 0.75" x 6.0". For use Aluminum or Copper Cable in Direct Burial Applications.

Category: Low Voltage Heat Shrink Splice Kits

Splice Kit, Heat Shrink, 600V, Conductor Range: 4 AWG - 1/0 AWG, Tubing Size: 1.1" x 8.0". For use Aluminum or Copper Cable in Direct Burial Applications.

Category: Low Voltage Heat Shrink Splice Kits

7 to 10 Inch Section UF Cable Type; Heat Shrink Tube, Waterproof Splice, Connector, UF Cable Contents; UL Approval; 11.5 Inch Mechanical Connector Connector Type; 600 V Voltage Rating; 14 to 8 AWG Conductor Size; For Direct Burial

Category: Low Voltage Heat Shrink Splice Kits

IDEAL, Underground Splice Kit, Thermo-ShrinkÖ, Al/Cu Splice Kits, Cable Size: 1/0 AWG - 250 KCMIL, Voltage Rating: 600 V, Operating Temperature: 105 DEG C

Category: Low Voltage Heat Shrink Splice Kits

Splice Kit, Heat Shrink, 600V, Conductor Range: 14 AWG - 8 AWG. Provides Abrasion Resistance and Moisture Ingress for 14/3 without ground thru 8/3 with ground in Direct Burial Applications.

Category: Low Voltage Heat Shrink Splice Kits

Easy-Splice Wrap Around Gel Splice Kit - 500 MCM to 6 AWG - 10 Inch Easy-Splice wrap-around gel splice closure sleeves quickly insulate and seal buried electrical connections rated up to 1,000 volts. Engineered to handle direct burial and manhole applications, these splice enclosure sleeves are equally well suited for insulation and jacket repair. Simply wrap and snap the sleeve on any cable in the use range. The sealant gel in the sleeve seals on contact. The splice closure sleeve can be applied on all common compression connectors and low voltage cables, as well as in-line mechanical connectors. Qualified to ANSI C119.1-1986 for underground splicing. A minimum seal length is required on each side of the connector opening or jacket damage. Use this guideline for minimum seal distance: WAGS-4/0 Series: 1.50" each side WAGS-500 Series: 2.20" each side WAGS-750 Series: 3.00" each side

Category: Low Voltage Heat Shrink Splice Kits

Splice Kit, Heat Shrink, 600V, Conductor Range: 14 AWG - 8 AWG, Provides Abrasion Resistance and Moisture Ingress For 14/3 Without Ground Thru 8/3 With Ground In Direct Burial Applications

Category: Low Voltage Heat Shrink Splice Kits

NSI WAGS-750-10 EASY-SPLICE W

Category: Low Voltage Heat Shrink Splice Kits

Easy-Splice Dual Rated Direct Burial Butt Splice Kit for #6 to 1/0 AWG Utilizing a mechanical dual rated splice and matched heavy wall heat shrink tubing to create an insulated splice for copper and/or aluminum cables. Temperature Rating 105 degrees C. 600 Volt Maximum.

Category: Low Voltage Heat Shrink Splice Kits

Easy-Splice Dual Rated Direct Burial Butt Splice Kit for 1/0 AWG to 250 MCM Utilizing a mechanical dual rated splice and matched heavy wall heat shrink tubing to create an insulated splice for copper and/or aluminum cables. Temperature Rating: 105 degrees C. 600 Volt Maximum.

Category: Low Voltage Heat Shrink Splice Kits

Direct Burial Splice Kit, Dual Rated, UF Cable Range 8/3 - 14/2 with Ground, UL, CSA

Category: Low Voltage Heat Shrink Splice Kits

THB DBSK82 DIRECT BURIAL SPLI

Category: Low Voltage Heat Shrink Splice Kits

EPCO, UF Cable Splice Kit, UF Cable Splice, Cable Type: UF Cable, Cable Size: 14 to 8 AWG, Voltage Rating: 600 V, Operating Temperature: 221 DEG F,105 DEG C, Includes: (1) 4-Position Mechanical Connector,(1) Heat Shrink Tubing

Category: Low Voltage Heat Shrink Splice Kits

easy-splice Wrap-around 250 - 750 Mcm Conductor Size 14"

Category: Low Voltage Heat Shrink Splice Kits

easy-splice Wrap-around 500 Mcm - 6 Awg Conductor Size 8"

Category: Low Voltage Heat Shrink Splice Kits