"lbr30/9/850/d-46"

Push-In Type Wire Jumper; 800 Volt; 9 Amp; Insulated; Wire Length: 60 Mm; Conductor Cross Section 0.75 Mm; Black

Category: Terminal Block Jumper Bars

Voltage and Conduit Marker Cards, "480 Volts", Dimensions: 2-1/4" x 9", Color: Black on Orange

Category: Voltage Markers

9 Watt LED Downlight Retrofit; 5-6 Inches; CCT Selectable; Round; White Finish; 120 Volt

Category: 5" / 6" Recessed LED Downlights

8-Piece T-Handle Hex Key Set, 6" Shafts, Sizes: 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8"

Category: T-Handle Hex Key Sets

9 Amp, NEMA Size 00, Non-Combination, Non-Reversing Starter, Freedom, 3-Pole, 3-Phase Magnetic, Thermal Overload Relay, NEMA Type 1, Indoor, 240 VAC/ 60 Hz - 220 VAC/ 50 Hz Coil, Cover Control: Reset Button, Must Add Class 20 Heater Pack

Category: NEMA Size 00

Incandescent Lampholder, Medium Base, Single Circuit, 660W-250V, Features: Shoulder for Clamp Type Shade, (2) 6" 16AWG Black and White Leads - Free Ends Stripped 3/4", Material: Rubber, Black

Category: Lampholder Adapters & Extensions

LED T8 Type A/B Lamp: 3' T8, 12W, 1500Lm, 120-277v, 82CRI, Hybrid Direct (A) & Bypass (B) - Single/Double Ended Connection. Color (CCT) Selectable: 3500-4000-5000K. 0-10V Dimming (Dimming is dependent on the ballast in Type A applications). Halco p/n 87101: 36T8-12-8CS-HYB-D-LED.

Category: T8 Tubular LED Lamps

9 Watt A19 LED Lamp, 120V, > 90 CRI, 800 Lumens, 2700K, E26 Base, Dimmable, Title 20/24 CA Compliant

Category: A-Type Traditional LED Lamps

150 Amp Fuse, Rejection, Brand or Series: Class RK5, Interrupting Rating: 200000 Amp VAC RMS Symmetrical, 20000 Amp VDC, Terminal Type: Cartridge, Rejection, Dimensions: 9/16 Diameter x 2 Length Inch, Voltage Rating: 250 VAC/125 VDC, Features: Time Delay, Dual Element

Category: Class RK5 Fuses

9 Watt A19 LED Lamp, 120V, > 90 CRI, 800 Lumens, 5000K, E26 Base, Dimmable, Title 20 CA Compliant

Category: A-Type Traditional LED Lamps

IDE 30-3435 9-1/2 LINEMAN

Category: Crimping Pliers

SSB Intumescent Firestop Pillow 2"x6"x9"

Category: Fire Barrier Pillows

Cable Snap Clip, 3/16” - 9/32” Flange, 0.468" - 0.562"

Category: Flange-Mount Cable/Conduit Clips

277V Replacement Coil Kit for Definite Purpose Contactors, 600V Rated, 2 & 3-Pole, 15, 25, 30 & 40 Amp, 50/60 Hz, Used with C25 DP Contactor (Series D1).

Category: Starter & Contactor Replacement Coils

Jaw Opening: 1-1/2in, Material: High Carbon Steel, Teeth: Laser Hardened, Finish: Vinyl

Category: Adjustable Pliers

9 Watt A19 LED Lamp, 120V, CRI > 80, 800 Lumens, 2700K, 220° Beam Angle, E26 Base, Dimmable, 60W Equivalent

Category: A-Type Traditional LED Lamps

Refill Cartridge, Polyester Tape, Dimensions: 3/8" x 18', Color: Black on White

Category: Permanent Labels

PAR30 Short Neck LED: 9-Watt, 810 Lumens, CCT Selectable ( 27K / 30K / 35K / 40K / 50K), 25 or 40 Degree Selectable Beam Angle, 120 Volt, 90 CRI, Dimmable, T-20 Rated. Product # 37221, Model # 9PAR30SNDIM/9CCTS/BAS.

Category: PAR30 Reflective LED Lamps

Cable Tie, 15.35 Inch Long, UL Rated, 50 Pound Tensile Strength, PA66, Natural, 100/pkg

Category: Non-Releasable Cable Ties

9 Watt T8 LED; 2Ft; 3500K; Medium Bi Pin Base; 50000 Average rated hours; 1100 Lumens; Type B; Ballast Bypass; Single or Double Ended Wiring

Category: T8 Tubular LED Lamps

Flat Angle Bracket Plate, 4-Hole, Hole Diameter: 9/16", Material: Stainless Steel

Category: Flat Plate Strut Channel Connectors

Corrosion Protection Tape, Pipe Wrap, Scotchrap, All-Weather, Unprinted. Size: 2" Width, 100' Length. Thickness: 10 mils. Temperature Rating: 176° F. Color: Black.

Category: All Weather Corrosion Protection Tape

Maestro 0-10V Dimmer Occupancy/Vacancy Sensor, Passive Infrared, 8A Fluorescent Ballast Or LED Driver, 120-277V, White (Wall Plates Sold Separately)

Category: Occupancy/Vacancy Sensor Dimmers

16"-24" Housing IC/Non-IC, Fire-Rated Enclosure: One Hour Fire Rating

Category: Fire Rated Recessed Lighting Enclosures