Boxes & Enclosures

3" x 2", 1-Gang, Gangable, Square Corner Switch Box with Plaster Ears, Drawn, Metallic. Depth: 2-3/4". Side Knockouts: (6) 1/2". Bottom Knockouts: (1) 1/2". Cubic Inches: 14.0".

Category: Metallic Switch / Outlet Boxes

Wall Mount, Type 3R, Enclosure, Screw Cover / KO's, Size/Dims: 8" x 8" x 4", Material/Finish: Galvanized Steel/Gray

Category: NEMA 3R Screw Cover Enclosures

Weatherproof Box, 2-Gang, Die Cast. Depth: 2". (5) 3/4" Threaded Outlets (2 in each end, 1 in back), Includes: (2) Closure Plugs & Ground Screw. Gray.

Category: 2-Gang Metallic Weatherproof Boxes

4" Square, Exposed Work Cover, Type: Combination, (1) GFCI/Decorator Receptacle & (1) Duplex Receptacle, 1/2" Raised, Drawn, Metallic. Cubic Inches: 7.3".

Category: 4" Square Metallic Box Covers

Fan/Fixture Mounting Block with Built-In Electrical Box, Non-Metallic, Textured & Paintable Surface. Fan Weight: 70 lbs. Fixture Weight: 200 lbs. Cubic Inches: 14.5". Includes: (1) NM Cable Connector & (4) Parked Screws. For use on Sloped up to 90 Degree

Category: Non-Metallic Angled Ceiling / Fixture Boxes

Vertical Bracket, 4" Square Box, Welded, Metallic. Depth: 1-1/2". Side Knockouts: (6) 1/2" & (3) 1/2" & 3/4" TKO (eccentric) . Bottom Knockouts: (2) 1/2" & (2) 1/2' & 3/4" TKO (eccentric) . Cubic Inches: 21.0". Includes: Ground Screw.

Category: 4" Square Metallic Boxes With Brackets

FDC Weatherproof Box, 1-Gang, Non-Metallic, (3) 3/4" Threaded Outlets (1 in each end, 1 in back). Includes (3) 3/4" to 1/2" Reducer Bushings and (2) Closure Plugs. Cubic Inches: 16".

Category: 1-Gang Non-Metallic Weatherproof Boxes

4" Square Cover, 1-Device, Mud Ring, 1-1/4" Raised, Drawn, Metallic, for 1900

Category: 4" Square Metallic Box Mud Rings

Junction Box, Mounting Feet, Solid Cover, Size/Dims: 6.00" x 6.00 " x 4.00", Material/Finish: PVC/Gray, NEMA Rating: 1, 2, 3R, 4, 4X, 6, 6P, 12, 13.

Category: Mounting Feet Cover Enclosures

Fixture Support Box, Round, 4 Inch Diameter, Black, Non-Metallic, For Use With Nonmetallic Sheathed Cable

Category: Round Non-Metallic Old Work Ceiling / Fixture Boxes

Three Gang Electrical Box For Use With Nonmetallic Sheathed Cable

Category: Non-Metallic Old Work Switch / Outlet Boxes

Pull Box, NEMA 3R, Screw Cover, Wall Mount, 12" x 12" x 6", Steel, Knockouts, Gray Powder Coated

Category: NEMA 3R Screw Cover Enclosures

3-1/2" Octagon Box, Drawn, Metallic. Depth: 1-1/2". Side Knockouts: (4) 1/2". Bottom Knockouts: (1) 1/2". Cubic Inches: 11.8". Maximum Static Load: 50 lbs.

Category: Octagon Metallic Boxes

4 Inch Octagon Box Cover, Blank Type, Drawn, Steel

Category: Octagon Metallic Box Covers

4" Square Cover, 1/2" Knockout, Cover, No Raise, Drawn, Metallic, for 1900.

Category: 4" Square Metallic Box Covers

4" Square, Fixture Cover, Mud Ring, 1/2" Raised, Drawn, Metallic. Ears: 2-3/4" Center to Center, for 1900 to 8B

Category: 4" Square Metallic Box Fixture Covers

Weatherproof Box, 1 Gang, No Outlets, 2-3/4 Inch Deep, Non-Metallic, Mounting Feet Included

Category: 1-Gang Non-Metallic Weatherproof Boxes

4" Square, Exposed Work Cover, Type: Combination, (1) GFCI/Decorator Receptacle & (1) Toggle Switch, 1/2" Raised, Drawn, Metallic. Cubic Inches: 7.3".

Category: 4" Square Metallic Box Covers

In-Use Cover, 1-Gang, Weatherproof, Vertical and Horizontal Mount, Extra Duty, Non-Metallic, Depth: 2-3/4". Includes Separate Insert Types: Duplex, Decorator/GFCI Receptacle, Toggle Switch and Single Receptacle Diameters: 1.125", 1.375", 1.56", 1.625", 1.687" & 2.125", Gray. Includes: Lockable Tab.

Category: 1-Gang Weatherproof In-Use Box Covers

Octagonal Steel Fan/Fixture Support Box, Width: 4 in., Depth: 1-3/4 in., Volume: 17 cu. in., Type of Installation: New Work, Weight Capacity: 70 lbs for Fan and 200 for Fixture, Any Span Between 16" and 24"

Category: Octagon Metallic Ceiling Boxes With Hangers

3-1/2 Inch Diameter, 3/0, Old Work Switch/Outlet Box, Non-Metallic, Depth 2 Inch Cubic Inches 14.5 Inch Includes: Snap Brackets, Clamps, 24/Box

Category: Round Non-Metallic Old Work Ceiling / Fixture Boxes

4" Square Cover, 1-Device, Mud Ring, 1" Raised, Drawn, Metallic, for 1900.

Category: 4" Square Metallic Box Mud Rings

Flashing Panel. Fits 1/2" to 3/4" Conduit - Liquid Tight, EMT, Rigid, and PVC. For Conduit and Wire Whips Through Brick and Stone Veneers, 11-1/8" x 11-1/8" x 3/32".

Category: Weatherproof Box Flashing Panels

Designed for indoor use for applications that require a junction or pull box to secure and manage electrical connections.

Category: NEMA 1 Screw Cover Enclosures