"dmapl4040 diablo controls"

Control Connect Sensor: Multi-Level Control Based On Motion, Controls 0-10 Vdc Led Drivers or Dimming Ballasts, 3 levels of control: Time (3-60 mins), Sensitivity and Dimming (0-75%), Power Supply: 12V-24V DC, >30mA, Dim Control Output: 0-10V. Control Connect Sensor for IRHS and ORHBS series.

Category: Passive Infrared Fixture Mount Occupancy Sensors

Lutron FCJS-010 Vive PowPak Wireless Fixture Control For 0–10 Volt Drivers & Ballasts

Category: Occupancy Sensor Power Packs

Emergency Lighting Control Unit, 120/277V, Max Load: 20A (Ballast), 10A (Incandescent), 1HP (Motor), Dimensions: 1.7"x2.97"x1.64" (HxWxD), Push-to-Test Button

Category: Occupancy Sensor Power Packs

nLight Plug Load Control Power Pack, 120V, 2 RJ-45 Ports, Self-Powers Only, 3.38”H x 2.53”W x 1.83”D (86mm x 64mm x 47mm) - Does Not Include ½” Chase Nipple, Blue

Category: Occupancy Sensor Power Packs

Power/Relay Pack: On/Off and dimming control of a luminaire or group of luminaires, Controls up to 80 mA of 0-10V controlled fixtures together: 0-10VDC Dimming output (via side leads), 24V Output Terminals, Support luminaires with electronic off capabilities (zero light output based on 0-10V diming level), 24VDC output to power up to 2 CMS SSA ceiling mount sensor, Supports app-less pairing. Sensor Switch # PP5 SSA D 24V, Acuity Ci Code: *2900NG

Category: Occupancy Sensor Power Packs

Power/Relay Pack: On/Off and dimming control of a luminaire or group of luminaires, Controls up to 80 mA of 0-10V controlled fixtures together, 0-10VDC dimming output (via chase nipple), 24V output terminals Support luminaires with electronic off capabilities (zero light output based on 0-10V diming level), 24VDC output to power up to 2 CMS SSA ceiling mount sensor, Supports app-less pairing. Sensor Switch # PP5 SSA D 24V, Acuity Ci Code: *2900NA

Category: Occupancy Sensor Power Packs

Emergency Lighting Control Device: 120/277V, Max Load: 8 Amp (LED Driver), 20 Amp (Ballast), 10 Amp (Incandescent). Unit temperature withstand condition range of -20° to 55° C. Dimensions: 4.625" x 2.25" x 2.25"

Category: Occupancy Sensor Power Packs

Radiora2 Fan Control, Multi-Location/Single-Pole, 2 Amp, Neutral Wire Required, Color: White

Category: Daylighting Controls

Pushbutton Wall Switch, Dimming Operation, 1 Switch/ Manual On, Multi-Way (e.g. 3-Way), White

Category: Occupancy Sensor Modules

Lighting and Plug Load Flex Control Power Pack, Input: 120-277 VAC, 50/60Hz, 20A, Auto/Manual, Output: 24 VDC.

Category: Occupancy Sensor Power Packs

Automatic Dimming Control Sensor, Ceiling Mount, Low Voltage, Single Zone, Visible Light Programming, White Finish

Category: Passive Infrared Ceiling Mount Occupancy Sensors

Twist-to-Lock Occupancy Sensor (White): PIR / Photocell; Broad occupancy detection supports heights from 8 ft to 45 ft. Daylighting dimming and switching photocontrol. Adjustable lighting control settings: occupancy time, high trim, and daylighting setpoint. Support ingress protection, IP66. Configurable from the floor using IWP bi-directional remote. Support passive powerless programming, allows programming while unpowered via RFID. *Acuity / Sensor Switch Catalog #: TLS WH, Ci Code: 289JT6.

Category: High Bay Occupancy Sensors

Lighting and Plug Load Flex Control Power Pack, Input: 120-277 VAC, 50/60Hz, 20A, Auto/Manual, Output: 24 VDC.

Category: Occupancy Sensor Power Packs

This Passive infrared Ceiling/Wall Sensor detects occupancy to control lighting in a wide variety of applications. These sensors provide superior coverage and performance with great energy savings. up to 2000 sq feet, isolated relay, light level.

Category: Passive Infrared Wall Mount Occupancy Sensors

Dual Technology Ceiling Occupancy Sensor: 24VDC/VAC, 43mA, 360°. The DT-300 works with low voltage momentary switches to provide ON/OFF manual control & contains an isolated relay with N/O and N/C outputs; rated for 1 Amp @ 30 VDC/VAC. Built-in light level sensor – works from 10 to 300 foot-candles.

Category: Passive Infrared Wall Switches

PIR Occupancy Sensor, Wall Switch, 180°, 120/277V AC, 600 Hz, Single-Pole or Multi-Location, Coverage: 2100 Sq. Ft., Color: White. Wallplate Not Included

Category: Passive Infrared Wall Switches

Switchpack, 120-277, Provides 24VDC, 225mA Output To Low Voltage Occupancy Sensors And Daylight Controls, 16-20A Loads

Category: Occupancy Sensor Power Packs

Power Pack, 120-277 VAC Power Input, 30 VDC Control Input

Category: Occupancy Sensor Power Packs

Switchpack, 120/277, Provides 15VDC, 125mA Ou0tput To Low Voltage Occupancy Sensors And Daylight Controls, 20A Loads, Compatible with Magnetic/Electronic Ballasts.

Category: Occupancy Sensor Power Packs

Twist-to-Lock Occupancy Sensor (Black): PIR / Photocell; Broad occupancy detection supports heights from 8 ft to 45 ft. Daylighting dimming and switching photocontrol. Adjustable lighting control settings: occupancy time, high trim, and daylighting setpoint. Support ingress protection, IP66. Configurable from the floor using IWP bi-directional remote. Support passive powerless programming, allows programming while unpowered via RFID. *Acuity / Sensor Switch Catalog #: TLS BK, Ci Code: 289JT8.

Category: High Bay Occupancy Sensors

Ceiling Mount Occupancy Sensor, Dual Tech (PIR/ Microphonics), Small Motion 360°, Automatic Dimming Control (Of Remote Dimming Output), Rear RJ45 (CAT5e Patch Cable & RJ45 Splitter Included)

Category: 360 Degree Occupancy Sensors

NLight Low Voltage, Wall Switch Occupancy Sensor, Passive Infrared, Raise/Lower & Dimming Control, Standard Temperature/Humidity Rated, Color: White

Category: Passive Infrared Wall Switches

Low Voltage Wall Switch Sensor, Dual Tech: PIR/Microphonics Occupancy Detection, Raise/Lower, Dim Control, White. New Architectural look.

Category: Passive Infrared Wall Switches

Occupancy Sensor, 120/277/347V, 800/1200/1500W, 360° Coverage, Ceiling Mount, Passive Infrared Technology, Color: White

Category: Passive Infrared Ceiling Mount Occupancy Sensors