"ba-4-16-h cooper b-line"

Hex Driver Sizes Include: 1/4-Inch, 5/16-Inch, 3/8-Inch, 7/16-Inch, 1/2-Inch, And 9/16-Inch, Impact-Rated Sockets For The Toughest Driving Applications, Flip Sockets Enable Quick Access And Convenience To Common Sizes, Color Coded Hex Sizes For Easy Identification, Store Sockets In Any Order And Orientation On The Shaft, Bit Holding Design Allows The 1/4-Inch Socket Size To Drive Hex Fasteners And Hold Screwdriver Bits, Flip Socket Set Can Quickly Attach To An Impact Driver Or Our 1/4-Inch Quick-Connect Driver Handles For Any Situation, Handle Not Included

Category: Sockets & Socket Sets

Eaton B-Line series rod support, 1.8750" H x 3" L x 1.8750" W, Malleable iron, 350 Lbs load cap, 3/8”-16 thread/rod size

Category: Beam Clamps - Adjustable

1/2" EMT or RIGID Conduit Clamp with retained bold and built-in nut; 1/4" mounting hole. Standard Packaging Quantity: 100.

Category: Conduit Clamps

Heat Shrink Tubing, 4' Long Stick, Thick Wall Adhesive Lined, Up to 3.5:1, 2", 51/16 dia, PO, Black

Category: Heavy Wall Heat Shrink

LED PL-C/T Retrofit Lamp: UL TYPE A+B, Ballast Compatible or Ballast Bypass 120-277V; Selectable Color Temperature: 2700/3000/3500/4000/5000K, Wattage: 16, Lumens (Depending on color choice): 1750-1850, Rotating Head for Horizontal or Vertical Mount, Base: G24q 4-Pin. Signify Order Code: 577890, 12NC 929003477604, Product Name: 16PL-C/T/COR/42HV-5CCT/FF18/4P/10/1.

Category: LED Retrofit For Compact Fluorescent Lamps

Splice Clevis, 4 Holes, Hole Diameter: 9/16 in, Material: Steel, Finish: Zinc Dichromate, Length: 7-1/4" Width: 1-5/8", Compatible With: PS 200 & PS 210.

Category: Strut Channel Joiners

Eaton B-Line series tee/cross flat fitting, 5.37"Hx3.5"Lx1.62"W, Steel, Hot-dipped galv, 1/4"Gauge, Flat four hole tee plate,Pre assembled

Category: Flat Plate Strut Channel Connectors

Measuring Tape, Pull Line, Diameter: 3/4", Length: 1,000 ft, Tensile Strength: 2,500 lbs.

Category: Measuring Pulling Tape

4 Inch Housing Non-IC, Air-Tite Shallow Ceiling Remodel 120V Line Voltage

Category: 4" Non-IC Rated Recessed Lighting Housings

4 Inch LED Remodel Housing IC Air-Tite Shallow Ceiling 120V Line Voltage

Category: Recessed LED Housings

100 Amp, 1-Phase, 5 Jaw, Ring-Type. 3-Wire, 600V, Surface Mount, Top/Bottom Feed, NEMA 3R. HxWxD: 17" x 9-11/16" x 4-5/8

Category: Meter Sockets with Bypass

4 Inch LED Housing IC Air-Tite Shallow Ceiling 120V Line Voltage

Category: Recessed LED Housings

Measuring Tape, Pull Line, Printed Measurements Every Foot & Anti-Skid Pads, Length: 3,000 ft, Diameter: 3/16 Inch, Tensile Strength: 170 lbs

Category: Measuring Pulling Tape

3/4 inch, Die Cast Two Screw Connector

Category: Zinc Die Cast NM Cable Connectors

Channel Nut Without Spring, 3/8"-16, Steel With Zinc Finish

Category: Strut Channel Nuts

LED T8 Type A/B Lamp: 4' T8, 12.5W, 1600Lm, 120-277v, 82CRI, Hybrid Direct (A) & Bypass (B) - Single/Double Ended Connection. Color (CCT) Selectable: 3500-4000-5000K. 0-10V Dimming (Dimming is dependent on the ballast in Type A applications). Halco p/n 87102: 48T8-12-8CS-HYB-D-LED.

Category: T8 Tubular LED Lamps

LED TYPE A/B PL w/ Flex Color: Light output on one side, G24q/GX24q 4-Pin Base, 120-277V Hybrid line voltage or with a compatible electronic ballast (see .pdf catalog page for compatible ballast), 1400 Lumens, 9 Watt (Replaces up to 42W 4 Pin lamps), 2700K/4000K/5000K Selectable CCT. *Not for use in enclosed fixtures.

Category: LED Retrofit For Compact Fluorescent Lamps

Breaker Connection Kit. For PRL3A Panelboards, 3-Phase (only), F-Frame Breaker Types: EHD, FD, HFD, FDB and FDC. Horizontally Mounted. Number of Breakers: 2. Number of Poles: 3. Kit Includes: (2) A & C Phase Connectors, (1) B Phase Connector, (2) B Phase Isolators, (4) 8-32 x 1-3/4" Hex Square Recessed Head Screw, (3) 1/4-20 x 7/8" Hex Square Recessed Head Screw, (6) 10-32 x 9/16" Hex Square Recessed Head Screw, (4) 10-32 x 1/2" Hex Square Recessed Head Screw, (1) Deadfront Cover, (3) Filler Plates, (1) Instruction Sheet.

Category: Panelboard Connection Kits

LED TYPE A/B PL w/ Flex Color: Light output on one side, G24q/GX24q 4-Pin Base, 120-277V Hybrid line voltage or with a compatible electronic ballast (see .pdf catalog page for compatible ballast), 1400 Lumens, 9 Watt (Replaces up to 42W 4 Pin lamps), 3000K/3500K/4000K Selectable CCT. *Not for use in enclosed fixtures.

Category: LED Retrofit For Compact Fluorescent Lamps

4 Ft. White Wire Guard for Use w/SSF Series Only

Category: Wire Guards/Reflectors

4-11/16 Inch Square Box, Welded, Metallic, Depth: 2-1/8 Inch, Side Knockouts: (8) 1 Inch, Bottom Knockouts: (2) 1/2 Inch & (2) 3/4 Inch, Cubic Inches: 42

Category: 4-11/16" Square Metallic Boxes

OZ-Gedney Ground-Tite Type 4Q-LT Grounding Liquid Tight Straight Connector With Lug, Size: 1/2 IN, Connection: Compression X Tapered MNPT Hub, Conductor Range: 14 - 4 AWG, Malleable Iron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, Insulated Throat, Hazardous Location, 1-7/8 IN Width, 1-3/8 IN Height, 1-3/16 IN Turning Radius Gland Nut, Third Party Certification: UL File Number E-24264, CSA 9795, Applicable Third Party Standards: UL 467, CSA C22.2 No.41, Federal Specification W-F-406E, NEMA : FB-1, Class I, Division 2 Per NEC 501.4(B), Class I, Zone 2 Per NEC 505.15(C)(2), Class II, Division 1 Per NEC 502.4(A)(1)(e), Class II, Division 2 Per NEC 502.4(B)(2), Class III, Division 1 Per NEC 503.3(A)(2), Class III, Division 2 Per NEC 503.3(B), Intrinsically Safe Per NEC 504.20, For Liquidtight Flexible Metal Conduit

Category: Malleable Iron Liquidtight Flex Connectors

4-11/16" Square Box, Welded, Metallic. Depth: 3-1/4". Side Knockouts: (2) 1/2" & 3/4" TKO, (2) 1" & 1-1/4" TKO, (2) 1" & 2" KO. Bottom Knockouts: (2) (2) 3/4"- 1" TKO, (2) 1/2" KO. Cubic Inches: 66.7". Includes: Ground Screws.

Category: 4-11/16" Square Metallic Boxes

4-11/16" Square Cover, 1-Device, Mud Ring, 5/8" Raised, Drawn, Metallic.

Category: 4-11/16" Square Metallic Box Mud Rings