"k3234/12 m bochner"

(2) 12 AWG Conductors and (1) 12 AWG Ground, NM-B, Solid Copper Conductor, 90°C Insulation, 600V, Yellow, 250 ft. Package, Non-Metallic Sheathed Cable

Category: 12 AWG NM-B

QD Cable, Portait 2.400 m, 12 AWG, Order of 1 Each = 1 Connector

Category: Solar Cable Extensions

Cable Tie, 12 Inch Long, UL Rated, 50 Pound Tensile Strength, PA66, Natural, 1000/pkg

Category: Non-Releasable Cable Ties

QD Cable, Landscape 2.400 m, 12 AWG, Order of 1 Each = 1 Connector

Category: Solar Cable Extensions

Ground Terminal Block without Rail Contact. Screw Clamp. Type: M 16/12.N.VO. Color: Yellow Body/Green Marking. Size: 16 mm Block, 12 mm Spacing. DIN 1 - DIN 3. Wire Size: 18 - 6 AWG.

Category: Ground Terminal Blocks

Circuit Separator. Type: SCM6. Color: Gray. Thickness: This accessory does not increase the thickness of the block. Used with Terminal Block Type: M 1,5/6.HH and ADV blocks, M 4/6, M 6/8, M 10/10, M 16/12 Blocks.

Category: Terminal Block Circuit Separators

Fuse Holder Terminal Block. Double - Deck. Compression Clamp. Type: M 4/8.D2.SFD. Color: Gray. 300V/10A. Size: 4 mm Block, 8 mm Spacing. DIN 1 - DIN 3. Wire Size: 24 - 12 AWG. Includes: 24V LED Blown Fuse Indicator.

Category: Double Deck Fuse Holder Terminal Blocks

Fuse Holder Terminal Block. Compression Clamp. Type: M 4/8.SFT. Color: Gray. 600V/6.3A. Size: 4 mm Block, 8 mm Spacing. DIN 1 - DIN 3. Wire Size: 22 - 12 AWG. ***Equipped with (2) test sockets***

Category: 4mm Fuse Holder Terminal Blocks

Feed Through Terminal Block. Screw Clamp. Type: M 2,5/5. Color: Gray. 600V/30A. Size: 2.5 mm Block, 5 mm Spacing. DIN 1 - DIN 3. Wire Size: 22 - 12 AWG.

Category: 2.5mm Feed Through & Ground Terminal Blocks

EM-M Conduit/Pipe to Flange Clip, Spring Steel, nVent Armour, 1" EMT, 9/16"û3/4" Flange

Category: Flange-Mount Cable/Conduit Clips

Fuse Holder Terminal Block. Compression Clamp. Type: M 4/8.SFLT. Color: Gray. 600V/10A. Size: 4 mm Block, 8 mm Spacing. DIN 1 - DIN 3. Wire Size: 22 - 12 AWG. Blown Fuse Indicator: Neon Lamp 110-230 V.

Category: 4mm Fuse Holder Terminal Blocks

Fuse Holder Terminal Block. Compression Clamp. Type: M 4/8.SF. Color: Gray. 600V/10A. Size: 4 mm Block, 8 mm Spacing. DIN 1 - DIN 3. Wire Size: 22 - 12 AWG.

Category: 4mm Fuse Holder Terminal Blocks

Abb; Electronic Time Relay; Ct-erd 12, On-delay; Timing Range: 05 S - 100 Hr; Coil: 24 - 240 Vac, 24 - 48 Vdc; Contact Configuration: 1 C/o; Contact Rating: 250v, 6 Amp; Mounting: Din Rail (en 60715), Snap-on; Connection: Fine Strand With Wire End Ferrule: (2) 20 - 16 Awg/(1) 20- 14 Awg, Fine Strand Without Wire End Ferrule: (2) 20 - 16 Awg/(1) 20- 14 Awg, Rigid: (2) 20 - 16 Awg/(1) 20- 12 Awg; Enclosure: Ip50 (enclosure), Ip20 (terminal); Size: 0.69 In Width X 2.76 In Heightx 2.28 In Depth; Operating Cycles: Mechanical Switching: 30000000 Cycles, Electrical Switching: 100000 Cycles; Operating Temperature: -20 To +60 Deg C; Environmental Conditions: Storage Temperature: -40 To 85 Deg C, Damp Heat: 95 Pct Rh; Switching Current: 100 Milamp Minimum; Switching Current: 6 Amp At 230 Vac (resistive), 3 Amp At 230 Vac (inductive), 6 Amp At 24 Vdc (resistive), 2 Amp At 24 Vdc(inductive); Recovery Time: Less Than 50 Ms; Accuracy: Less Than 005 Pct Withinthe Rated Control Supply Voltage, Less Than 06 Pct Within The Temperature Range;amperage Rating: 53.52 Milamp At 115 Vac, 61.1 Milamp At 230 Vac, 14.7 Milamp At24 Vdc; Output Circuit: 15-16/18; Indicator: Green LED For Supply Voltage, Yellow LED For Relay Status; Stripping Length: 7 Mm; Contact Material: Cd-free; Tightening Torque: 0.5 - 0.8 N-m; Switching Voltage: 12 V Minimum

Category: DIN Rail Mount Timing Relays

Fuse Holder Terminal Block. Compression Clamp. Type: M 4/8.SFL. Color: Gray. 600V/10A. Size: 4 mm Block, 8 mm Spacing. DIN 1 - DIN 3. Wire Size: 22 - 12 AWG. Includes: Neon Blown Fuse Indicator.

Category: 4mm Fuse Holder Terminal Blocks

12 AWG Cable with No Connectors, Sold by 1 Foot, 1 Roll = 984 Ft.

Category: Solar Micro Inverter Components

Polyether M-1 Adhesive Sealant, Application: Damp, Dry or Cold Climates, Color: White, Includes: (1) 10 oz Cartridge, Case Size: (12)

Category: Adhesive Sealant

Polyether M-1 Adhesive Sealant, Application: Damp, Dry or Cold Climates, Color: Gray, Includes: (1) 10 oz Cartridge, Case Size: (12)

Category: Adhesive Sealant

Feed Through Terminal Block. Screw Clamp. Type: M 2,5/5N. Color: Blue. 600V/30A. Size: 2.5 mm Block, 5 mm Spacing. DIN 1 - DIN 3. Wire Size: 22 - 12 AWG.

Category: 2.5mm Feed Through & Ground Terminal Blocks

12 AWG, THHN/THWN-2, Stranded Copper, 600V, White, 500 ft. Reel.

Category: 12 AWG Stranded Copper THHN

12 AWG THHN/THWN-2 Stranded Copper, 600 volts, Black, 500 foot reel

Category: 12 AWG Stranded Copper THHN

Feed Through Terminal Block. Screw Clamp. Type: M 16/12. Color: Gray. 600V/85A. Size: 16 mm Block, 12 mm Spacing. DIN 1 - DIN 3. Wire Size: 18 - 6 AWG.

Category: 16mm Feed Through & Ground Terminal Blocks

12 AWG, THHN/THWN-2, Stranded Copper, 600V, Green, 500 ft. Reel

Category: 12 AWG Stranded Copper THHN

12/2 Copper Conductors with Ground, 600V, Interlocked Aluminum Armor, Solid, 250 ft. Coil. Wire Colors (120 Volt): Black, White, Green. O.D.: .460"

Category: Solid Conductor Aluminum Armored Cable

12 AWG, THHN/THWN-2, Stranded Copper, 600V, Red, 500 ft. Reel.

Category: 12 AWG Stranded Copper THHN