"waterproof splice"

3M™ Scotchlok™ Insulation Displacement Connector 560/560B is a double run or tap connector for tap or parallel splicing. It is suitable for general purpose electrical connections on an auto, boat, van or trailer. Polypropylene insulated, self stripping and flame retardant.

Category: Insulation Displacement Wire Connectors

3M™ 200A Loadbreak Elbow Insulating Cap, 215IC, 15 kV, 1/Box

Category: Loadbreak / Deadbreak Protective Caps

Deadbreak Adapter, 600V, 35kV, 1/Box 1.755" - 1.875" (44.6 - 47.6), Black

Category: Loadbreak / Deadbreak Cable Adapters

Non-Insulated, Wire Range: 22 - 18, Color: Metallic, 100/PK

Category: Non-Insulated Butt Connectors

Splice Kit, Motor Lead Pigtail Type, Feeder Cable Range: 1/0 AWG - 250 MCM, Motor Lead Range: 2 AWG - 250 MCM. Voltage Range: 1000V, Connection Type: 2-Hole Lug (Pigtail). ***Kit will make (3) Splices***

Category: Medium Voltage Motor Lead Splice Kits

Splice Kit, Motor Lead Pigtail Type, Feeder Cable Range: 2 AWG - 1/0 AWG, Motor Lead Range: 4 AWG - 1/0 AWG. Voltage Range: 5kV or 8.7 kV, Connection Type: 2-Hole Lug (Pigtail). ***Kit will make (3) Splices***

Category: Medium Voltage Motor Lead Splice Kits

Splice Kit, Motor Lead Pigtail Type, Feeder Cable Range: 1/0 AWG - 250 MCM, Motor Lead Range: #2 AWG - 250 MCM. Voltage Range: 5/8kV, Connection Type: 2-Hole Lug (Pigtail). ***Kit will make (3) Splices***

Category: Medium Voltage Motor Lead Splice Kits

Modular Splice Kit, Cold Shrink, 15 kV, Shielded cable, Insulation Range: 1.220 - 1.420", Wire Range: 500 MCM. ***Used with 5815 Series Modular Equipment Tee.***

Category: Medium Voltage Cold Shrink Splice Kits

High Voltage Linerless Rubber Splicing Tape, Scotch, Unprinted. Size: 1 Inch Width, 30 Foot Length. Thickness: 30 mils. Temperature Rating: 194°F. Color: Black.

Category: Linerless Rubber Splicing Tape

Splice Kit, Cold Shrink, 5/8 kV, Shielded or Non-shielded Cable, Conductor Range: Cooper 500 - 1000 MCM, Aluminum 500 - 1000 MCM, Maximum Connector Length: Copper 43 Inch, Aluminum

Category: Medium Voltage Cold Shrink Splice Kits

Splice Kit, Cold Shrink, 15 kV, Works with Various Types of Shielded Cables, Conductor Range: 500 MCM - 1000 MCM. Cable Insulation Range Size: 1.08" - 1.01.7", Connector Requirements: Minimum O.D.: 0.80", Maximum O.D.: 1.84", Maximum Length: AL/CU 6.75", Copper 7.50"

Category: Medium Voltage Cold Shrink Splice Kits

3m(tm) Molded Rubber Splice Qs Ii 5411-ci-21, 2 Awg (1 Awg Solid), Cable Insulation O.d. 0.637-0.90 In, 1 Per Case

Category: Medium Voltage Cold Shrink Splice Kits

Modular Splice Kit, Cold Shrink, 15 kV, Shielded cable, Insulation Range: .785 - .970", Wire Range: 1/0 - 2/0 AWG. ***Used with 5815 Series Modular Equipment Tee.***

Category: Medium Voltage Cold Shrink Splice Kits

Copper Compression Sleeve, Standard Barrel, Wire Size: 1 AWG. Wire Diameter: ..200", Length: 1.88", Color code: Green. Suitable for indoor, outdoor, low and medium voltage up to 35kV Applications.

Category: Standard Barrel Copper Compression Sleeves

Copper Compression Sleeve, Standard Barrel, Wire Size: 4/0 AWG. Wire Diameter: .550", Length: 2.13", Color code: Purple. Suitable for indoor, outdoor, low and medium voltage up to 35kV Applications.

Category: Standard Barrel Copper Compression Sleeves

3M™ Cold Shrink Shielded Splice Kit 5550 Series are for splicing 5 kV and 8 kV shielded, solid dielectric, power cables. Meets requirements of IEEE 404. Each kit contains all the materials (except connectors and optional ground strap) required to construct three (3) single conductor splices on Tape Shield, Wire Shield or UniShield® cables. Note: The kit can also be used to splice a shielded to a non-shielded 5/8 kV cable. Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.

Category: Medium Voltage Cold Shrink Splice Kits

Resin Splice Kit, Multi-Mold, 600V, Maximum Conductor: 8 AWG (Split Bolt), 4 AWG (H & C Tap Compression). Kit Includes: Mold Body, Sealing Mastic, Scotchcast Resin 4 and Adhesive Film Strip.

Category: Non-Shielded Resin Splices

Copper Compression Sleeve, Standard Barrel, Wire Size: 1/0 AWG. Wire Diameter: .394", Length: 1.88", Color code: Pink. Suitable for indoor, outdoor, low and medium voltage up to 35kV Applications.

Category: Standard Barrel Copper Compression Sleeves

3M 5514A-350-CU QSIII SPLICE

Category: Medium Voltage Cold Shrink Splice Kits

Tape Splice Kits- Shielded Cable (3 Splices/kit)

Category: Medium Voltage Heat Shrink Splice Kits

Cold Shrink Splice Kit, 3 Conductor, For Armored/Non-Armored Cable, 5/8kV, Conductor Size: 3/0 AWG - 250 MCM, Insulation O.D. Range: 0.64 - 1.01 Inch, Splice Length: 52 Inch. Kits Include Material Necessary to Make (1) 3-Conductor Splice. Connectors Are Not Included and Must be Ordered Separately. The Completed Splice is Designed for Use in Cable Trays, Weather Exposed or Direct Burial Locations.

Category: Medium Voltage Cold Shrink Splice Kits

Splice Kit, Motor Lead Pigtail Type, Feeder Cable Range: 14 AWG - 10 AWG, Motor Lead Range: 16 AWG - 12 AWG. Voltage Range: 1000V, Connection Type: 1-Hole Lug (Pigtail). ***Kit will make (3) Splices***

Category: Medium Voltage Motor Lead Splice Kits

3M 5411-CI-1/0 15KV SPLICE KT 15 KV SPLICE KIT

Category: Medium Voltage Cold Shrink Splice Kits

3MÖ Motor Lead Inline Splicing Kits 5316-5319 Series are designed for splicing motor lead cables to incoming feeder cables, including the accommodation of inline connections at 1000 volts and less. The spliceÆs main component, the slip on splice cover, is made from EPDM rubber. A mastic strip is used for the moisture seal.

Category: Medium Voltage Motor Lead Splice Kits