Search results

Strain Relief, Deluxe Cord Grip, 3/4" NPT Straight Male 0.63-0.75" (16.0-19.1MM)

Category: Stainless Steel Strain-Relief Grips With Mesh

Steel, 1-Gang, Flush Type Extension Adapter, 500, 700 Series. Size: 15/16" Depth. Ivory.

Category: 1-Gang Raceway Box Extension Adapters

Handle Tie, Molded Plastic Handle. Used with BR Type Circuit Breakers for physically joining the handles of two adjacent 1-Pole Breakers

Category: Circuit Breaker Handle Ties

Nob Staple. Size: 1" Length, 1/2" Width. For use with: 2 Conductor, #12, #14 Wire. Package Quantity: Box of 500.

Category: Cable Staples

2" PVC Conduit Cap.

Category: PVC Conduit Caps

Heat Shrink, Heavy Wall, Cross-Linked Polyolefin Tubing, 1 kV, Conductor Range: 8 AWG - 1/0 AWG, Shrink Ratio: 3:1, Insulation Diameter Range: 0.20" - 0.80", Relaxed Tube Length: 48". Provides: Abrasion, Corrosion and Chemical Resistance in Submersible and Direct Burial Applications.

Category: Heavy Wall Heat Shrink

Conduit Body Cover with Gasket, 1 Inch, Form-In-Place Type, Form 7, Steel/Neoprene

Category: Steel Conduit Body Covers With Gaskets

Threaded Conduit Nipple, 1 Inch x 3 Inch, Steel, For use with Rigid Threaded Conduit

Category: Steel / Galvanized Steel Conduit Nipples

Wire Stripper, Reflex Super T®-Stripper Wire Stripper, Capacity: 8-16 AWG Solid, 10-18 AWG Stranded

Category: Combination Wire Stripper / Cutter Tools

200 AMP, 120/240V AC, 1-Phase, Plug On Neutral, Main Circuit Breaker Loadcenter, 30-Space, 60 Circuit, Aluminum Bus, Cover: Surface, NEMA 3R - Rainproof. Dims: H: 34-1/8", W: 14-5/16", D: 5-3/16"

Category: 1-Phase Main Breaker Aluminum Bus Load Centers

Designed for indoor use for applications that require a junction or pull box to secure and manage electrical connections.

Category: NEMA 1 Screw Cover Enclosures

Shockwave Magnetic Bit Tip Holder, Length: 6 inch

Category: Insert / Power Bit Holders

Designed for indoor use for applications that require a junction or pull box to secure and manage electrical connections.

Category: NEMA 1 Screw Cover Enclosures

Refill Cartridge, Indoor/Outdoor Vinyl Film, Dimensions: 0.375" X 21', Color: Black on White, Compatible With: Brady BMP 21, ID PAL, LABPAL Printers

Category: Permanent Tapes

Chase Nipple, 1/2 Inch, Material: Zinc Die Cast, For Use With a Conduit Coupling to Connect Conduit to a Box, or With a Locknut to Connect Two Boxes

Category: Zinc Die Cast Chase Nipples

2-1/2" Insulated, Threaded Rigid Gasketed Conduit Hub

Category: Die Cast Zinc Conduit Hubs

Bushing, Type: Insulating, Threadless, Size: 1-1/2 Inch, Non-Metallic, For Use With EMT Conduit

Category: EMT Bushings

(2) 2 AWG with (1) 4 AWG Neutral, Triplexed Aluminum Conductor, 600V, Triple Rated, Stephens, Approx. O.D.: 0.830", 1000 Ft. Reel

Category: Triplex URD Direct Burial Wire

Non-Metallic Liquidtight Fixture Whip, Length: 6 ft, 3-Wire, 10 AWG Stranded Wire, THHN, Color: Black, Red & Green, 1/2" Non-Metallic Conduit, Connectors: (1) Straight and (1) 90° Angle Screw-In w/Locknuts.

Category: Non-Metallic Armored Cable Whips

1-Gang, Decora/GFCI Device Decora Wallplate, Standard Size, Thermoplastic Nylon, Device Mount - Black.

Category: 1-Gang Decorator Wallplates

500 MCM, THHN/THWN-2, Stranded Copper, 600V, Black, 2500 ft Reel.

Category: 500 MCM Stranded Copper THHN

Rigid Strut Strap, 3 Inch Diameter, Pre-Assembled, Steel with Zinc Plated Finish, For Use With Rigid/IMC Conduit

Category: Strut Channel Rigid Conduit Clamps

SHOCKWAVE™ Impact Duty™ Step Bits (#1, #4, #9)

Category: Step Bits

EMT Compression Connector, 2-1/2 Inch Diameter, Insulated, Raintight and Concrete Tight, Steel

Category: Steel Raintight EMT Compression Connectors