Metering & Temporary Power

1-1/2" Diameter, Rainproof Conduit/Plate Type Hub, Metallic, Bolt-On, Conduit Size: 1-1/2" (381 mm) For use with Midwest Products

Category: RV Power Pedestal Base Hubs

400 Amp, 1-Phase, 4 Jaw, Ring-Type. 3-Wire, 600V, Surface Mount, Bottom Feed, Manual Circuit Closing Bypass, NEMA 3R. HxWxD: 32" x 24" x 6", ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Sockets with Bypass

200 Amp Solar Ready Meter Center, Ring Style, 4 Jaws, 1-Phase, 120/240V, 22 kAIC, 40/40 Distribution, 200A Main Breaker Included CSR2200N, 225A Buss Rating, BR Type Branch Breakers, OH/UG Service, NEMA 3R - Rainproof Enclosure, Surface Mount. Weight 45#, Height 34.17 Inch, Width 22.25 Inch, Length 5.31 Inch, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - Solar Ready

Metered Pedestal, 100 Amp, 120/240 Volt, Single-Phase, 3-Space, 2 AWG to 250 KCMIL (Copper/Aluminum, Line), 12 to 2 AWG (Copper/Aluminum, Ground), NEMA 3R, Galvanized Steel

Category: RV Power Pedestals

Bussed Spacers, For 1MP, 1MM, and 3MM Modular Metering Stacks, 6 Inch, 1200 Amp, Copper

Category: Group Metering Bussed Spacers

2" Diameter, Rainproof Conduit/Plate Type Hub, Metallic, Bolt-On, Conduit Size: 2" (508 mm) For use with Midwest Products

Category: RV Power Pedestal Base Hubs

Meter Socket Assembly, For use with 125 & 200 Amp 1MP, 1MM & 3MM Series Modular Metering Stacks

Category: Group Metering Renewal Parts

Ringless Meter Socket, Instrument Rated Socket, 20 Amp, 3-Phase, Over/Under, 3-5/16 Inch Hub Cover Plate, 13-Jaw, 600 VAC, Provisions For Test Switch, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Sockets with Bypass

30 Inch Pedestal Post, Two (2) 1-Gang Device Openings With Gasketed Blank Covers (1-BC), Includes 10-32 Ground Screw With 10" Solid Cu. #12AWG Pigtail (Top Opening), Gray

Category: RV Power Pedestals

Metering/Small Load Slip-On Padlock Bracket Kit, H x L x W: 1.8 Inch x 0.75 Inch x 0.75 Inch, Replaces 99-2512-5

Category: Meter Renewal Parts

Fifth Jaw Kit, Used With 1MP, 1MM, and 3MM Modular Metering Stacks. Bolted onto neutral in the 3, 6, or 9 o’clock position. Typically used on network metering systems (3-phase in/single-phase out) or when specified by utility company. ***Not for use as a replacement Jaw***

Category: Group Metering Fifth Jaw Kits

Meter Base, 200 Amp, 7 Jaw, Ring Type, 600 Volt AC, Plate Link Bypass, Ring Protect Bracket, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Sockets with Bypass

200 Amp, 1-Phase, 120/208/240V AC, 3-Wire, Series 1000, Two Element Meter, Line-to-Line, 200:0.1A Ratio, NEMA 1, Surface Mount Enclosure, Includes: (2) 200A Split-Core Current Transformers

Category: Submeters with Current Transformers

800 Amp, 600V, 3-Phase, 50 kAIC, 3 or 4-Wire, Current Transformer Mounting Base, Line Side: Stud - Load Side: Stud. CT Provisions: 3. ***Used Primarily by Utilities in CA, ID & UT***

Category: Current Transformer Mounting Bases

Commercial Meter Stack Module with EUSERC test-bypass-disconnect feature, (1) Ring Style, 5-Jaw, 225 Amp Meter Socket, 208Y/120V AC In, Single Phase, 120/240V AC Out, 800 Amp Bus Rating, Copper Bus, NEMA 3R. ***Requires (1) Bolt-on Type Main Tenant Circuit Breaker (Type EHD2 which requires (1) 37MMCBK kit, CC2_X, CHH2_H2X, CHH2_H4X or CHH2_X)***, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Commercial Meter Stacks

Meter Pack, Ring Style Meter Socket Covers, 1-Phase, 4 Meter Sockets, 120/240V AC, 200 AMP Socket Rating, 600 AMP Bus Rating, Aluminum Bus, Underground Incoming Feed. ***Requires (4) Bolt-on Type Main Tenant Circuit Breaker (Type CC2_X, CHH2_H2X, CHH_H4X or CHH_X) & (3) Lug Kits***, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Group Metering Meter Packs

Eaton B-Line Series Meter Breakers, 200 A, Test Block, Ring Type, ANSI 61 Gray Painted, #6-250 MCM, #6-250 MCM, Surface Mount, 7 Jaws, 3Ø/4W, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - without Distribution

100 Amp Line Side Solar Ready Meter Center, Ring Style, 4 Jaws, 1-Phase, 120/240V, 10 kAIC, 100A Main Breaker, 100A Buss Rating, BR Type Branch Breakers, OH/UG Service, NEMA 3R - Rainproof Enclosure, Surface Mount, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - Solar Ready

(2) Meter Bypass Jumpers, Used With 125 AMP and 200 AMP Sockets in 1MP, 1MM, and 3MM Modular Metering Stacks

Category: Group Metering Bypass Kits

Lighted Unmetered 50/30/20 Pedestal, (1) 50A (1) 30A (1) 20A GFCI REC , UL Listed, 120/240 Volt, Single Phase, NEMA 3R, 66" x 9" x 5"

Category: RV Power Pedestals

100 Amp, 1-Phase, 5 Jaw, Ring-Type. 3-Wire, 600V, Surface Mount, Top/Bottom Feed, NEMA 3R. HxWxD: 17" x 9-11/16" x 4-5/8, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Sockets with Bypass

200 Amp, 1-Phase, 4 Jaw, Ring-Type. 3-Wire, 600V, Flush Mount, Bottom Feed. HxWxD: 17" x 14 x 6". ***Stainless Steel, Not Gasketed*** NO KNOCKOUTS, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Sockets without Bypass

Meter Main, 200 Amp, 120/240 Volt AC, 1-Phase, 4 Jaw, Ring Type, 20 Space,40 Circuit Distribution, 2-Pole Main Breaker, 10 kAIC, Test Block Bypass, NEMA 3R, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - with Distribution

Bussed Spacer, 1200 Amp, 4-inch (101.6 mm), Copper. Required when stacks are mounted on right-hand side in EUSERC areas. For use with 1MM, and 3MM Modular Metering Stacks

Category: Group Metering Bussed Spacers