"terminal blocks"

Insulation Displacement Jumper. Type: AD2,5. 24 Amp. For use with Fuse Holder Terminal Blocks: M4/8, M4/6, MB10/12, MB10/22, MB10/24, and MB25/30.

Category: Terminal Block Jumper Bars

Snapbloc Power Distribution Block, Modular Design, Dual Rated, Line Conductor Range 350-6, Load Range 350-6, 2 Ports Per Pole Line Side, 2 Ports Per Pole Load Side, 1 Pole, UL, CSA, Includes Cover

Category: Double Primary / Double Secondary Non-Insulated Distribution Blocks

DIN Terminal Block, Depluggable, Series 15188, 600 Volt AC, 30 Amp, Disconnect, 4-Pole, 6-32 TPI Screw, 35 mm DIN Rail, C-Rail, White, Tin-Plated Copper Alloy Contact

Category: Disconnect Terminal Blocks

Sub-Feed Lug Block, Suitable For Convertible CH Loadcenters, 125 Amp, CH, Two-Pole, 1 Space, 0.75 Inch, 120/240 Volt AC, 1-Phase, Plug On Neutral, #10 - 1/0 AWG

Category: Load Center Lug Kits

Jumper Bar. 5 Pole. Type: BJDL5. Used with Spring Terminal Blocks with 5mm Spacing.

Category: Terminal Block Jumper Bars

A3 CONTACT BLOCK 1NC

Category: 30mm Contact Blocks

Terminal Block, Surge Protector, 32 Volt DC, 22 Volt AC, 400 mA, Low Resistance

Category: Surge Suppression Terminal Blocks

Polaris™ Insulated Multi-Tap Connector, 8 Port (Dual Sided Entry), 350 MCM - 6 AWG, 600 Volt, Black, Plastisol

Category: Dual Sided Entry Wire Connector Blocks

Feedthrough Terminal Block, Rail-Mounted, 4-Conductor, Width: 3.5 Millimeters, Blue, Rated Voltage: 800 V, Surge Voltage: 8 kV, Rated Current: 13.5 Amps, Push-In Cage Clamp Connection, Mounting Type: DIN-35 Rail

Category: 4mm Feed Through & Ground Terminal Blocks

Polaris™ Insulated Multi-Tap Connector, 3 Port (Single Sided Entry), 350 MCM - 6 AWG, 600 Volt, Black, Plastisol

Category: Single Sided Entry Wire Connector Blocks

Component Holder Terminal Block with Diode. Compression Clamp. Type: M 4/6.DD1. Color: Gray. 600V/25A. Size: 4 mm Block, 6 mm Spacing. DIN 1 - DIN 3. Wire Size: 22 - 12 AWG. Empty Double Decker Block for Components.

Category: Component Holder Terminal Blocks

Mounting Base of Mini-Split Condensing Units, Length: 17", Includes Mounting Bolts, Capacity: 900 Lbs Per Block

Category: Pads

Eaton Bussmann series JM modular fuse block, CR, 110-200 A, Three-pole, Class J, 200 kA, Knife blade end x knife blade end, 200 kAIC, 600 V

Category: Class J Fuse Blocks

30A, 600V, Fuse Holder Class T Fuse Block Cover

Category: Fuse Block Covers

Pen 6008 Term Block

Category: Terminal Strips

P-u 6004-scs Term Block

Category: Terminal Strips

Spade Terminal, Vinyl Insulated, #10 Fork, 12-10 AWG, Yellow, Package of 50 Each.

Category: Vinyl Insulated Standard Fork Terminals

Ring Tongues, Vinyl-Insulated, Wire Range: 22 - 18, Stud Size: 10, Color: Red, 25/PK

Category: Vinyl Insulated Ring Tongues

Female Disconnect, Vinyl Insulated, 22 to 18 AWG, .25 Inch x .032 Inch Tab, Red, Pack of 50

Category: Female Vinyl Insulated Wire Disconnects

Protective Cover For Power Block, 3-pole, Clear With Write-on Surface For Fieldtermination Identification

Category: Non-Insulated Connector Block Covers

Comb-Type Jumper Bar with Isolating Cover. 10 Pole. 70 Amp. Type: PC16. Used with Terminal Block Type: M 10/16.SF.

Category: Terminal Block Jumper Bars

2-Conductor Through Terminal Block, 24A, Miniature, Mounting: DIN 35 Rail, Gray

Category: 2.5mm Feed Through & Ground Terminal Blocks

Piggyback Disconnect, Stronghold Series, Vinyl Insulated, 16 – 14 AWG, 0.250 X 0.032 Inch Tab Size

Category: Female Vinyl Insulated Wire Disconnects

Secondary Fuse Block. Holds 1/4" x 1 1/4" Fuse. Rated up to a 300 Volt, 30 Amp Maximum. Includes a 6" long #14 gauge wire. For use with SBE Series Industrial Control Transformers.

Category: Transformer Secondary Fuse Kits