"nm2048-2 co"

Device plate that will accept up to six (6) Extron Electronics MAAP style plates. For use in the center compartment only. Devices supplied by others.

Category: Recessed Floor Box Service Fittings

Accepts standard 15A and 20A duplex receptacles. NOTE: Standard size for device plates for Plate Location 3 is 5 7/32" (132mm) x 2 3/4" (62mm).

Category: Recessed Compartment Box Device Plates

WMD FPB-2RT DBL GANG PLATE W/

Category: Poke-Through Mounting Plates

Recessed Floor Box, 4-Gang, Depth: 3-1/2 Inch, 3/4 - 2 Inch Conduit Openings, Steel

Category: Recessed Compartment Boxes

Poke-Thru Device Assembly, 8 Inch Diameter, Includes: (2) 20 Amp Duplex Receptacles, For Use With 8CTC2/8CT2 Covers

Category: Assembled Poke-Through Units

Non-Metallic, End Plate. Includes: (2) Outlet Identification Lables. Gray.

Category: Communication Module End Plates For Metallic Raceway

Steel, Special Nipple, 500, 700 Series. Thread: Female 3/8" Inside, Male 1/2" Outside. Galvanized.

Category: Metallic Raceway Connectors & Adapters

Unit is 15 1/2" [393.7 mm] and has one 15A gray duplex and one communication opening with adapter for Ortronics TracJack & Series II or Wiremold open system.

Category: Work Surface Power Centers

Eight 20A outlets with t-slots, 6' (1.8m) cord. Length 20" (508mm). Receptacle center-to-center 1 1/4" (32mm). 2- Amp unit with a 20A resettable circuit breaker. Units available with straight blade or Locking Plug.

Category: Work Surface Power Centers

Six outlets. Rugged white aluminum housing. 6' (1.8m) 14/3 SJT white cord with NEMA5-15 plug. Length 13 1/4" (337mm). Receptacle center-to-center 1 1/2" (38mm). Snap-on, slide-off mounting. cTUVus Listed as Medical Electrical Equipment. NOTE: Suitable for use where Article 517 of NEC requires Hospital Grade Outlets.

Category: Medical Grade Power Strips

Available in 3' [914mm] length with 12" spacing. USB is 2.4 Amps (shared between two ports) 5VDC. .040" [1.0mm] aluminum housing. Packed two per carton. Each unit supplied with one (1) Coupling and two (2) Blank End Fittings.

Category: Dual Circuit Steel Plugmold

W-mold G20gba618 Gry 4w2ckt P lugmld

Category: Single Circuit Steel Plugmold

W-mold G20gba12 Grau 4w2ckt grd Plugmold

Category: Single Circuit Steel Plugmold

Flangless cover for use in tile or carpet installation. Die-cast aluminum assembly. Provided with one 1" trade size screw plug for power or communication type cabling and one combination 1 1/4" and 2" trade size screw plug for communication type cabling. Allows for feeding both power and communication cabling. NOTE: Add suffix TR to the end of the part number to indicate tamper-resistant cover assembly. Tamper-resistant versions are secured with a single tamper-resistant screw. Black

Category: Square / Rectangle Recessed Box Covers

Non-Metallic, End Plate. Includes: (2) Outlet Identification Lables. Fog White.

Category: Communication Module End Plates For Metallic Raceway

2" IPS to 1 1/4" Afterset Insert Finish - Anodized Aluminum

Category: Round Recessed Box Covers

Four-Gang Cover, Two Activate Mini Adapters, 4000 Series Raceway, Gray

Category: 4-Gang Raceway Box Covers

Flanged cover for use in tile or carpet installation. Die-cast aluminum assembly. Provided with one 1" trade size screw plug for power or communication type cabling and one combination 1 1/4" and 2" trade size screw plug for communication type cabling. Allows for feeding both power and communication cabling. NOTE: Add suffix ôTRö to the end of the part number to indicate tamper-resistant cover assembly. Tamper-resistant versions are secured with a single tamper-resistant screw. Gray

Category: Square / Rectangle Recessed Box Covers

Steel, Power/Data Pole, Color: Gray, 10' 5", (2) Duplex Outlets, 20A, 125V, (1) Dedicated/Isolated & (1) Standard Outlet, Removable Cover with KO's for Data Connectors.

Category: Steel Power Poles

6' Steel Plugmold Multioutlet Strip with 4 single receptacles spaced 18", GBA Finish - Ivory

Category: Single Circuit Steel Plugmold

Accepts two (2) Wiremold CM Series Open System adapters (sold separately). NOTE: For use with RFB4E, RFB6, RFB6E Series Floor Boxes.

Category: Recessed Floor Box Service Fittings

For use in concrete floors. For use with round Evolution Series cover. Fully adjustable with tunnel compartments. Supplied with two (2) duplex mounting plates. Other plates sold separately.

Category: Square Recessed Floor Boxes

Complete cover and stem assembly with combination 1 1/4" and 2" trade size threaded conduit openings and closure plugs. Finished color bushed aluminum.

Category: Assembled Poke-Through Units

For use in either concrete or wood floors. Fully adjustable with tunnel compartment. Supplied with one (1) duplex receptacle mounting plate, and one (1) communication mounting plate. Other device plates sold separately. 2-Compartment Shallow Stamped Steel Recessed Box w/tunnel,1 Duplex Bracket and 1 Comm Bracket

Category: Recessed Compartment Boxes