"1" smurf tube"

Steel, 1-Gang, Extra Deep Device Box, 500, 700 Series. Size: 2-3/4" Depth. White.

Category: 1-Gang Raceway Device Boxes

Liquidtight Sealing Gasket, 1-1/4 Inch, Steel Retainer, Santoprene Rubber Seal

Category: Liquidtight Connectors - Accessories

3-In-1 (Thread, Measure, Pull) Premise Polyester Muletape®, Rated Up to 400 lbs., 4500 Ft. Bucket, Approximate 1/4" Wide,

Category: Measuring Pulling Tape

Connector Block, Single Primary/Multiple Secondary, 1-Pole, Line Side: (1) 14 AWG - 2/0 AWG, Load Side: (4) 14 AWG - 4 AWG, 600V, 175 Amps per Pole, Surface Mount.

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

Anchor Kit. Includes: (100) #10x1" Sheet Metal Square Drive Screws, (100) #22 Red Collar Anchors, (1) 1/4" Carbide Masonry Drill. *Dottie Part # 16945.*

Category: Sheet Metal Screw Anchor Kits

FS Device Box, 1-Gang, FSC Type Feed-Thru, (2) 3/4 Inch Hubs, Depth 2 Inch, Includes Internal Ground Screw, For use with Threaded Rigid Metal Conduit

Category: 1-Gang Malleable Iron FS & FD Device Boxes

Wallplate, QuickPort, 1-Gang, 1-Port, Box Mount, (2) ID Windows, Color: Ivory.

Category: Snap-In Wallplates

Pin Terminals, Maximum Solid: #1 plus 1/0, Maximum Stranded: #2 plus #1, For Use With: Aluminum or Copper Conductors, Rated up to 35 kV

Category: Non-Insulated Pin Terminals

Miniature Circuit Breaker K-Char., 10Ka, 30A, 1P Ul489

Category: 1-Pole DIN Rail Mount Circuit Breakers

Adjustable Hole Cutter, Diameter Range: 2" - 7", Cut Depth: 1", Drive Size: 1/4", Black Oxide Coated

Category: Adjustable Hole Saws

Wireway 90° Elbow, Size/Dims: 10.00x10.00, Material/Finish: Steel/Gray. For use with Type 1, Wireway

Category: Wireway Elbows

9-1/2" Journeyman High Leverage Side-Cutting Pliers, Connector Crimping, Nose Type: New England, Jaw Length: 1-9/32"

Category: Combination Pliers

40 AMP, 120/240V AC, 1-Phase, Main Lug Only Loadcenter, 2-Space, 4-Pole, Copper Bus, NEMA 1 - Indoor. Surface Mount. Cover Included. Dims: H: 9.50", W: 4.50", D: 3.13"

Category: 1-Phase Main Lug Copper Bus Load Centers

Eaton Crouse-Hinds series Condulet Form 7 wedge nut cover, Sheet steel, 1-1/2"

Category: Steel Conduit Body Covers

Weatherproof FS Box, 1-Gang, 1/2 Inch Lap Siding, UV Rated Plastic, Features: 1/2 Inch Lap Siding, Application: GFCI, Standard: UL, CSA, Material: UV Rated Plastic, Size: 3.31 Inch X 2.07 Inch X 5.09 Inch, Construction: One Piece, Cubic Capacity: 18.6 Inch

Category: Non-Metallic Surface Mount Switch / Outlet Boxes

EMT Combination Coupling; Fits 1/2 inch EMT to 1/2 inch Female Thread, Material: Zinc

Category: Zinc Die Cast EMT Set Screw Couplings

10 Amp, 1-Pole, BR Plug-On Circuit Breaker, 10 kAIC, Wire Size #14-4, 120/240 VAC.

Category: Residential 1-Pole Circuit Breakers

Hazardous Location Union, Zinc Plated Steel, 1-1/2", Female/Female

Category: Explosion-Proof Type UNF Unions

Fork Terminal, Vinyl Insulated, Funnel Entry, 12 – 10 AWG, 1/4 Inch Stud Size

Category: Vinyl Insulated Standard Fork Terminals

Compact Metal Assembled Limit Switch, Top Push Roller, Die Cast Aluminum, Compact, 2,720g Operating Force, 1mm to 2m/sec Operating Speed, 5.6mm min. Operating Travel, 1.7mm Pretravel, 910g Return Force. 600V Rated. Switch Body Includes: 1 N.O. & 1 N.C. Contacts. Switch Receptacle Includes: 1/2" NPT Conduit Entrance.

Category: Assembled Limit Switches

Ring Terminal, Vinyl Insulated With Brazed Seam, 10 - 12 AWG, 1/4 Inch Stud, Copper, Yellow

Category: Vinyl Insulated Ring Tongues

Sealing Fitting, Vertical/Horizontal, 1 Inch, Male/Female With Removable Male Nipple, 25% Fill, Aluminum, For Use With Rigid/IMC Conduit in Close Turning Radius.

Category: Explosion-Proof Male / Female (Vertical / Horizontal) Sealing Fittings

Electronics Pocket Screwdriver 4-In-1

Category: Multi-Bit Screwdrivers

Pull Rope, Rot/Mildew Resistance & Unaffected by Chemicals or Water, Diameter: 1/4", Length: 1,200 ft, Tensile Strength: 1,130 lbs. **Dottie Part 61316**

Category: Pull Rope