"brk-40d service tool co. llc"

6 Piece Drill/Tap Kit, Sizes: 6-32 - 1/4-20, Hex Shank Size: 1/4", Material Thickness: 10 GA

Category: Combination Drill / Tap Bit Kits

Combo Drill/Tap Bit, Size: 10-32NF, Hex Shank Size: 1/4", Material Thickness: 10GA

Category: Combination Drill / Tap Bits

2" Diameter, Reduced Wall Steel Conduit, Metallic, Hot Dipped Zinc Galvanized Low Carbon Steel, 25 feet Coil.

Category: Flexible Steel Conduit

M12 FUEL™ SURGE™ 1/4" Hex Hydraulic Driver 2 Battery Kit, Includes: (1) M12 FUEL™ SURGE™ 1/4" Hex Hydraulic Driver, (2) M12™ REDLITHIUM™ CP2.0 Battery, (1) M12™ Lithium-ion Battery Charger, (1) Belt Clip, (1) Contractor Bag

Category: Cordless Heavy Duty Impact Drivers

Carbide Tipped Hole Saw, Diameter: 1-1/8", Chuck Size: 3/8", Conduit Size: 3/4"

Category: Carbide Tipped Hole Saws

(3) 6 AWG and (1) 6 AWG Bare Ground, SE/SER, 600V, Aluminum Conductor, PVC Jacket, 1000 ft. Reel.

Category: Aluminum SER Service Entrance Cables

12/2 Copper Conductors with Ground, 600V, Interlocked Aluminum Armor, Stranded, 1000 ft. Reel. Wire Colors (120 Volt): Black, White, Green. O.D.: .461"

Category: Aluminum Armor - Stranded Copper Conductors

MODbox™ Service Utility Cart, Polypropylene, Black

Category: Utility Carts

Carbide Tipped Hole Saw, Diameter: 7/8" (22 mm), Chuck Size: 3/8", Conduit Size: 1/2"

Category: Carbide Tipped Hole Saws

Combo Drill/Tap Bit, Size: 6-32NC, Hex Shank Size: 1/4", Material Thickness: 10GA

Category: Combination Drill / Tap Bits

3/8" Diameter, Reduced Wall Aluminum Conduit, Metallic, Lightweight Aluminum Alloy, 100 feet Coil.

Category: Flexible Aluminum Conduit

Combo Drill/Tap Bit, Size: 8-32NC, Hex Shank Size: 1/4", Material Thickness: 10GA

Category: Combination Drill / Tap Bits

Zing Lockout Tag, Legend: "Out Of Service", Dimentions: 5.75"H x 3"W, Pull Out: 50 lbs rated, Quantity: 10 in pack,

Category: Lockout Tags

Magnum Vault Security Paneling for 4426 Series Service Carts.

Category: Utility Carts

Measuring Tape, Pull Line, Printed Measurements Every Foot & Anti-Skid Pads, Length: 3,000 ft, Diameter: 3/16 Inch, Tensile Strength: 170 lbs

Category: Measuring Pulling Tape

Cable Cutter, Length: 9-1/4", Weight: 1 lb, Capacity: #1 AWG Copper, Aluminum, 100-Pair Communications Cable, Steel with Plastic Coated Handles

Category: Cable Cutters

M12 FUEL™ Installation Drill/Driver Kit, Includes: 3/8" Chuck Head, Offset Driver Head, 1/4" Hex Head and Right Angle Head

Category: Cordless Heavy Duty Drill Drivers

Precision Screwdrivers Feature Rotating Caps For Optimum And Precise Control, Color Coded Rings For Easy Spotting Of Each Tip Type, Over-Sized Cap Markings For Quick Identification Of Tip Size, Cushion-Grip™ Handles For Maximum Comfort When Working On Small Equipment, Heat Treated And Precision-Machined Tip For Greater Strength, Set Contains Tamperproof Torx® Bits T6H, T8H, T10H And T15H (Cat. Nos. 6303, 6313, 6323, 6333), Compatible With Security Systems, Small Electronics And More, Torx® Is A Registered Trademark Of Acument Intellectual Properties, LLC

Category: Screwdriver Sets

Carbide Tipped Cutter Kit, Diameters: 7/8" (22 mm), 1-1/8", 1-3/8", 1-3/4", 2", Includes: Cutter Heads, Arbor, Hex Key, Case

Category: Carbide Tipped Hole Saws

4426 Pro Service Cart and Vault Security Paneling Combo Kit, 5" Caster

Category: Utility Carts

1-1/2" Diameter, Reduced Wall Steel Conduit, Metallic, Hot Dipped Zinc Galvanized Low Carbon Steel, 25 feet Coil.

Category: Flexible Steel Conduit

CO Contact Cleaner, Application: Cleans Sensitive Electrical/Electronic Equipment, Includes: (1) 14 oz Aerosol Spray Can

Category: Environmentally Friendly Cleaners

Twine, Spiral Wrap, Tracer, Poly Line, Rot/Mildew Resistance & Resists Tangling While Being Dispensed, Length: 500 ft, Tensile Strength: 210 lbs

Category: Spiral Wrap Poly Pull Line

Carbide Tipped Hole Saw, Diameter: 1-3/8", Chuck Size: 3/8", Conduit Size: 1"

Category: Carbide Tipped Hole Saws