"glc-4 db"

Connector Block, Single Primary/Multiple Secondary, 1-Pole, Line Side: (1) 14 AWG - 2/0 AWG, Load Side: (4) 14 AWG - 4 AWG, 600V, 175 Amps per Pole, Surface Mount.

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

Grounding Bonding Intersystem, Aluminum, (1 ) #2 - #6 Main with (4) #4 - #14 Taps with Cover

Category: Intersystem Ground Taps

Power Distribution Block, Large, (2) 350 MCM-6 AWG Primary (12) 4-14 AWG Secondary

Category: Double Primary / Multiple Secondary Non-Insulated Distribution Blocks

Polaris Vision Tap™ Insulated Multi-Tap Connector, 3 Port (Dual Sided Entry), 500 MCM - 4 AWG, 600 Volt, Plastisol, Clear

Category: Dual Sided Entry Wire Connector Blocks

Extra Heavy Duty Direct Burial Ground Clamp for up to 1in Pipe This incredible ground clamp can handle just about any size ground wire and just about any application. UL Listed for direct burial in earth and concrete, it can be used with rebar, water pipe, copper tubing and ground rods up to 1 inch in diameter. Assembled with tough, 304 stainless steel screws. Will accommodate ground wires from 8 AWG to 4/0 AWG. cULus Listed Grounding and Bonding.

Category: Bare Wire Ground Clamps

NSI GLC-12HDB HEAVY DUTY DURE

Category: Bare Wire Ground Clamps

NSI GLC-12DB GROUND CLAMP #10

Category: Copper Lay-In Lugs

Ground Clamp, Heavy Duty, Pipe Size: 1/2 - 1 Inch, Wire Range: 10 - 2 AWG, Material: Bronze, Suitable For Direct Burial

Category: U-Bolt Ground Clamps

Ground Clamp, 3/8 - 1 Inch, Heavy Duty, Copper, For Use With DB Rated Rebar

Category: Bare Wire Ground Clamps

ground Clamp #10 -2 Stranded, Direct Burial, Rebar

Category: Rebar Ground Clamps

Ground Rod Connector, 3/8" Pipe Size, 10-4 Wire Size, Silicon Bronze, 0.375" Length

Category: Ground Rod Ground Clamps

Buzzer, 8 - 16 Volt AC, 3 - 6 Volt DC, 1 Amp, 88 dB @ 3 ft, Surface Mount, 3 Inch Height x 2-1/2 Inch Width x 1 Inch Depth

Category: Dixie Buzzers

Power Distribution Block, (2) 2/0-14 AWG Primary (12) 4-14 AWG Secondary

Category: Double Primary / Multiple Secondary Non-Insulated Distribution Blocks

Connector Block, Single Primary/Multiple Secondary, 1-Pole, Line Side: (1) 14 AWG - 2/0 AWG, Load Side: (6) 14 AWG - 4 AWG, 600V, 175 Amps per Pole, Surface Mount.

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

Insulated Multi-Cable Connector Block For Fine Stranded Flexible Copper Conductors And For 1-Wires And In-Line Splicers/Reducers, 600V, Number of Ports: 2, Wire Range: 14 AWG - 6 AWG, Abrasion And Chemical Resistant, Rated For Use With Copper Conductors

Category: Single Sided Entry Wire Connector Blocks

Toggle Switch, Bat Handle Type, SPST, Maintained Contact, Circuit Functions: On Off, 20 Amp @ 125V AC, 10 Amp @ 250V AC. Metallic Toggle, 1/4" Quick Connect Terminal. Mounting: Bushing, 15/32".

Category: 1-Pole Toggle Switches

NSI G-2-S-DB DIRECT BURIAL BRONZE

Category: Bare Wire Ground Clamps

Submersible Multi-Tap Connector, One Sided Entry, 2/0 - 14 AWG, 3 Port, Aluminum Alloy With EPDM Insulation

Category: Connector Blocks - Submersible - One Sided Wire Entry

Toggle Switch, Bat Handle Type, DPST, Maintained Contact, Circuit Functions: On Off, 20 Amp @ 125V AC, 10 Amp @ 250V AC. Metallic Toggle, 1/4" Quick Connect Terminal. Mounting: Bushing, 15/32".

Category: 2-Pole Toggle Switches

Submersible Inline Connector, 2/0 - 14 AWG, Aluminum With EPDM Rubber Insulation, Black, Rate for CU/AL Conductors

Category: In-Line Splicers/Reducers - Submersible

Connector Block, Single Primary/Multiple Secondary, 1-Pole, Line Side: (1) 6 AWG - 350 MCM, Load Side: (12) 14 AWG - 4 AWG, 600V, 310 Amps per Pole, Surface Mount.

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

Connector Block, Single Primary/Single Secondary, 1-Pole, Line Side: (1) 4 AWG - 500 MCM, Load Side: (1) 6 AWG - 500 MCM, 600V, 380 Amps per Pole, Surface Mount.

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

Appliance Switch, Rocker Type, SPST, Maintained Contact, Circuit Functions: On Off, 15 Amp @ 125V AC or 7.5 Amp @ 250V AC. Color: Red. Connection Type: 1/4" Quick Connect Terminals.

Category: Appliance Rocker Switches

Toggle Switch, Bat Handle Type, SPST, Maintained Contact, Illuminated Red, Circuit Functions: On Off, 15 Amp @ 125V AC, 10 Amp @ 250V AC. Metallic Toggle, 1/4" Quick Connect Terminal. Mounting: Bushing, 15/32".

Category: 1-Pole Toggle Switches