Starters & Contactors

1 N/O & 1 N/C, Side Mount Auxiliary Contact for 15 - 75 Amp, 2, 3 & 4 Pole Definite Purpose Contactors.

Category: Definite Purpose Contactor Auxilliary Contacts

Side-Mount Auxiliary Contact. For use with XTPB, XTPR, XTPM Type MMP's. 600V Rated. Includes: 2 N.O. & 1 N.C. Contacts.

Category: Manual Motor Protector Auxiliary Contact Blocks

32 Amp, 3-Pole, 600V Rated, IEC, Non-reversing Contactor, XT Series, Frame C, 24-27V DC Coil. Includes: 1 N.O. Auxiliary Contact.

Category: IEC Contactors - DC Operating

50 Amp, 3-Pole, Definite Purpose Contactor, 600V Rated, Lug Terminals, 240V AC Coil, Series: C1

Category: 3-Pole Definite Purpose Contactors

4.0 - 6.0 Amp, IEC, Overload Relay, Type: Thermal Bi-Metallic. Trip Class 10. Selectable Manual or Automatic Reset. For use with XT Series, Frame B Contactors.

Category: Overload Relays - Thermal Type

Cover Control Kit, Type 1, Non-Combination, Box 1 Only, Cover Control Includes: M22 Series STOP/START Oval Pushbuttons ***Compatible With Type 1 Non-Combination Cover Control (Box 1 Only), Box 1 Offering Includes FVNR Contactor Sizes 00–2, Electronic FVNR Starters, Size 00–2 And Bi-Metallic FVNR Starters Size 00–1***

Category: Starter & Contactors - Enclosure - Controls

Xt Manual Motor Protection Accessories, Enclosure , Ip65 Enclosure

Category: Manual Motor Controller Enclosures

208V AC, Replacement Coil, Freedom Series. For use with NEMA Size 1-2 (Series A1 & B1) & IEC Frame Sizes G - K (Series B1 & C1)

Category: Starter & Contactor Replacement Coils

40 Amp, 2-Pole, Definite Purpose Contactor, 600V Rated, Lug Terminals, 120V AC Coil. D1 Series

Category: 2-Pole Definite Purpose Contactors

Xtoe Ol (9-45a) Iec Fr-d Standard

Category: Overload Relays - Electronic Type

22.5 mm, Heavy-Duty Pushbutton Operator, Non-illuminated, Blue, Flush, Labeled Reset, Momentary.

Category: Starter & Contactors - Enclosure - Controls

Front Auxiliary Contact with 1 N.O. & 1 N.C. Contacts. Used with Sequence A, Frame B-C IEC Contactors.

Category: Starter & Contactor Auxiliary Contacts

Softstarter PSTX105-600-70 has a rated maximum operational current of 105 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard, lugs built in, good for up to 2/0

Category: Advanced Control Softstarters

18 Amp, NEMA Size 0, Non-reversing Starter, Freedom, 600V Rated, 3-Phase Magnetic, Electronic Overload Relay, Full Load Amp Range: 1 - 5A, 120 VAC/ 60 Hz - 110 VAC/ 50 Hz Coil.

Category: NEMA Size 0 Open Motor Starters

90 Amp, NEMA Size 3, Non-Combination, Non-Reversing Starter, Freedom, 3-Pole, 3-Phase Magnetic, Thermal Overload Relay, NEMA Type 1, Indoor, 120 VAC/ 60 Hz - 110 VAC/ 50 Hz Coil. Cover Control: Reset Button. Must Add Class 20 Heater Pack.

Category: NEMA Size 3

90 Amp, NEMA Size 3, Non-reversing Starter, Freedom, 600V Rated, 3-Phase Magnetic, Thermal Overload Relay, 120 VAC/ 60 Hz - 110 VAC/ 50 Hz Coil. ***Heater Pack required for Overload Protection***

Category: NEMA Size 3 Open Motor Starters

NEMA Size 1, Pump Panel, Irrigation, Rotary Disconnect, 30 Amp HMCPE Circuit Breaker, 10 Maximum Hp @ 480V, Thermal Overload Relay, NEMA Type 3R, Rainproof, 480 Volt/ 60 Hz - 440 Volt/ 50 Hz Coil. Cover Control: Start and Reset Pushbuttons, Hand/Off/Auto Selector Switch. Dimensions: H: 29.10", W: 14.25", D: 8.47" ***Heater Pack required for Overload Protection. Not rated for service entrance for PG&E***

Category: NEMA Size 1 Pump Panels

25 Amp, 3-Pole, Definite Purpose Contactor, 600V Rated, Screw/Pressure Plate Terminals, 24V AC Coil. Series: D1.

Category: 3-Pole Definite Purpose Contactors

Mechanical Interlock for Frame F & G IEC Contactors.

Category: Starter & Contactor Mechanical Interlocks

NEMA Size 3, Pump Panel, Combination, Flange Handle Disconnect, 100 Amp HMCPE Circuit Breaker, 50 Maximum Hp @ 480V, Thermal Overload Relay, NEMA Type 3R, Rainproof, 480 Volt/ 60 Hz - 440 Volt/ 50 Hz Coil. Cover Control: Start and Reset Pushbuttons, Hand/Off/Auto Selector Switch. ***Heater Pack required for Overload Protection*** Dims: H: 38.40", W: 18.86", D: 8.47"

Category: NEMA Size 3 Pump Panels

PSR Series Softstart (Compact style). 15.2 FLA (Full Load Amps). Motor Voltage: 208V - 600V AC. Control Voltage: 120V - 240V AC. Din-Rail/Screw Mountable. Requires: TA25 Series Overload Protection & DB25 Series Mounting Kit.

Category: Basic Control Softstarters

3-Phase Commoning Link. 600V Rated. For use with (2) Frame B MMP's with No Side-Mounted Auxiliaries or Voltage Releases.

Category: Manual Motor Protector Busbars

MS Series Toggle Operated Manual Motor Starter in a NEMA 1 Enclosure. Provides Manual Control and Overload Protection to 1-Phase Motors. Ideal for HVAC applications, 1-Phase, 2-Pole, 1 HP @ 120/240V AC, 1 HP @ 120/240V DC, 1/4 HP @ 32V DC. ***Must Add MS Series Overload Protection***

Category: Enclosed Manual Starters / Switches

3-Phase Busbar System. 65A, 600V Rated. For use with up to (2) MS116 or MS132 Series Manual Motor Protectors.

Category: Manual Motor Protector Busbars