"b610-16-110-06"

4" Octagon Ceiling Box with Bar Hanger, Metallic. Depth: 1-1/2".Side Knockouts: (4) 1/2" & (2) Priouts. Bottom Knockouts: (2) 1/2". Adjustable Length: 16" to 24". Fan Weight: 70 lbs. Fixture Weight: 110 lbs. Cubic Inches: 16".

Category: Octagon Metallic Ceiling Boxes With Hangers

1/2" Strap, 1-Hole, Material: Zinc Plated Steel. For use with: EMT

Category: Steel 1-Hole Conduit Straps

Abb; Electronic Time Relay; Ct-erd 12, On-delay; Timing Range: 05 S - 100 Hr; Coil: 24 - 240 Vac, 24 - 48 Vdc; Contact Configuration: 1 C/o; Contact Rating: 250v, 6 Amp; Mounting: Din Rail (en 60715), Snap-on; Connection: Fine Strand With Wire End Ferrule: (2) 20 - 16 Awg/(1) 20- 14 Awg, Fine Strand Without Wire End Ferrule: (2) 20 - 16 Awg/(1) 20- 14 Awg, Rigid: (2) 20 - 16 Awg/(1) 20- 12 Awg; Enclosure: Ip50 (enclosure), Ip20 (terminal); Size: 0.69 In Width X 2.76 In Heightx 2.28 In Depth; Operating Cycles: Mechanical Switching: 30000000 Cycles, Electrical Switching: 100000 Cycles; Operating Temperature: -20 To +60 Deg C; Environmental Conditions: Storage Temperature: -40 To 85 Deg C, Damp Heat: 95 Pct Rh; Switching Current: 100 Milamp Minimum; Switching Current: 6 Amp At 230 Vac (resistive), 3 Amp At 230 Vac (inductive), 6 Amp At 24 Vdc (resistive), 2 Amp At 24 Vdc(inductive); Recovery Time: Less Than 50 Ms; Accuracy: Less Than 005 Pct Withinthe Rated Control Supply Voltage, Less Than 06 Pct Within The Temperature Range;amperage Rating: 53.52 Milamp At 115 Vac, 61.1 Milamp At 230 Vac, 14.7 Milamp At24 Vdc; Output Circuit: 15-16/18; Indicator: Green LED For Supply Voltage, Yellow LED For Relay Status; Stripping Length: 7 Mm; Contact Material: Cd-free; Tightening Torque: 0.5 - 0.8 N-m; Switching Voltage: 12 V Minimum

Category: DIN Rail Mount Timing Relays

4 Inch Octagon Ceiling Box with Bar Hanger, Metallic, 1-1/2 Inch Deep, Side Knockouts: (3) 1/2 Inch & (2) Priouts, Bottom Knockouts (2) 1/2 Inch, Adjustable Length: 16 to 24 Inch. Fan Weight 70 lbs, Fixture Weight 110 lbs, 16 Cubic Inches

Category: Octagon Metallic Ceiling Boxes With Hangers

Auger, D'VersiBit System, Length: 54", Bit Diameter: 3/8", Shaft Diameter: 3/16", Type: A

Category: Flexible Steel Drill Bits

Auger, D'VersiBit System, Length: 54", Bit Diameter: 3/8", Shaft Diameter: 3/16", Type: B

Category: Flexible Steel Drill Bits

Auger, D'VersiBit System, Length: 72", Bit Diameter: 3/8", Shaft Diameter: 3/16", Type: B

Category: Flexible Steel Drill Bits

4" Diameter, Ceiling/Fixture Saddle Box, Non-Metallic, Depth: 3-13/16. Base Depth: 1/2". Cubic Inches: 14". Fan Weight: 70 lbs. Fixture Weight: 110 lbs. Fixture Rating

Category: Non-Metallic Saddle Boxes

Thin wall heat shrink, .06" (1.6mm) diameter, clear cross-linked polyolefin, 25 pc. package quantity

Category: Thin Wall Heat Shrink

Ceiling Fixture Box with Bar Hanger, Metallic, Depth 1-1/2 Inch, Side Knockouts (4) 1/2 Inch, Bottom Knockouts (2) 1/2 Inch, Adjustable Length 16 Inch to 24 Inch, Fan Weight 70 lbs, Fixture Weight 110 Pounds, 15.6 Cubic Inches

Category: Octagon Metallic Ceiling Boxes With Hangers

Tray Cable, #4/3 Copper, #8G, #18/9, 12-16 kW, 600 Volt, Gray PVC Jacket, 2500' Roll

Category: Generator Cable

4" Octagon Ceiling Box with Bar Hanger, Metallic. Depth: 5/8". Bottom Knockouts: (2) 1/2". Adjustable Length: 16" to 24". Fan Weight: 70 lbs. Fixture Weight: 110 lbs. Cubic Inches: 8".

Category: Octagon Metallic Ceiling Boxes With Hangers

Exhaust Fan, WhisperCeiling DC, Pick-a-Flow Speed Selector 50, 80 or 110 CFM with ECM Motor, <0.3 Sone, Flex-z Fast Installation Bracket, Integrated Dual 4" or 6" Duct Adaptor, 7-3/8" Housing Depth

Category: Exhaust Fans

Disconnect, Type DNF, Female, Nylon Insulated, 14 - 16 AWG, Funnel Entry, Tab Size 0.250 x 0.032 Inch, Blue, Brass With Tin Plating

Category: Female Nylon Insulated Wire Disconnects

16 AWG Type SIS Thermostat Wire, 90 Degree Celsius, 600Volts

Category: 16 AWG SIS Switchboard Wire

Shallow Strut, Elongated Holes On Back, 13/16" Height, 1-5/8" Width, Pre-Galvanized Steel, 14 Gauge, Sold In Multiples of 10 Ft.

Category: Steel Strut with Elongated Holes

Exhaust Fan with LED Light, Pick-a-Flow Speed Selector 50, 80 or 110 CFM with ECM Motor, <0.3, <0.3, 0.4 Sone, 10 Watt Led Chip Panel, <1 Watt Led Night Light, Flex-z Fast Installation Bracket, Integrated Dual 4 Inch or 6 Inch Duct Adaptor, 7-3/8 Inch Housing Depth

Category: Fan / Light Units

OMN P183C-06 18AWG 3C 7STR BC

Category: Unshielded Plenum Multi-Conductor Cable

Threaded Conduit Nipple, 4 Inch x Close, Steel, For use with Rigid Threaded Conduit

Category: Steel / Galvanized Steel Conduit Nipples

Threaded Conduit Nipple, 3 Inch x Close, Steel, For use with Rigid Threaded Conduit

Category: Steel / Galvanized Steel Conduit Nipples

WhisperFit® DC Fan 50-80-110 CFM, Single-Hinged Bracket. Retrofit exhaust fan.

Category: Ceiling Fans

Punchdown 110 Blade, Replacement Blade, Compatible With: SurePunch, SurePunch Pro Punchdown Tool

Category: Punchdown Tool 110 Blades

Threaded Conduit Nipple, 4 Inch x 4 Inch, Steel, For use with Rigid Threaded Conduit

Category: Steel / Galvanized Steel Conduit Nipples

Ceiling Fan, Series: InVent. CFM: 110, Sones: 1.3, Duct Size: 4", Power Watts: 23.4, Energy Star Qualified, Color: White

Category: Ceiling Fans