Search results

WMD 4MAAP 4IN EVO 1/2 GANG AU

Category: Poke-Through Cover Assemblies

Device plate that will accept up four (4) Ortronics Series II dual modular inserts. For use in the center compartment only. Devices supplied by others.

Category: Recessed Compartment Box Device Plates

WLK 44DP 4IN EVO DUP REC DEVI

Category: Poke-Through Cover Assemblies

Device plate that will accept up to two (2) Extron Electronics MAAP device plates. For use in either of the two side compartments only. Not for use in the center compartment. Extron devices supplied by others.

Category: Poke-Through Mounting Plates

WMD RFBA6C30OG RFBA 6G 3.0 IN

Category: Recessed Compartment Boxes

8IN SURFACE STYLE CVR ASSEMBLY AA

Category: Poke-Through Cover Assemblies

Rectangular Floor Box With Activations, 4-Gang, On-Grade Type, Floorport Cover, 3 Inch Depth, (20) Knockouts 3/4 - 2 Inch Diameter, Steel

Category: Recessed Compartment Boxes

Floor Box, 2 Gang, On Grade Type, 3 Inch Depth, (14) Knockouts 1, 3/4, and 1-1/4 Inch, Steel

Category: Square Recessed Floor Boxes

2-Gang, Cover Plate Flange, Metallic, Color: Brass. WxL: 9.185" x 6.080". Accepts 880S2, 880M2, 880CS2-1 and 880CM2-1 Floor Boxes. For use in Carpet Applications

Category: Square / Rectangle Recessed Box Flanges

Flanged cover for use in tile or carpet installation. Die-cast aluminum assembly. Insert in lid allows for carpet or tile cutouts to match finished floor. Finish - Black

Category: Square / Rectangle Recessed Box Covers

Floor Box Cover, 1-Gang, Type: Communications/Power, 2 Inch and 1 Inch Plugs, Aluminum

Category: Square / Rectangle Recessed Box Covers

Brushed aluminum duplex cover plate, 3.290" x 4.310" (83.6mm x 109.5mm). Flip lids can also be used with 106 type frames for communications. NOTE: Brass covers and flanges are not interchangeable with aluminum or nonmetallic covers and flanges. Nonmetallic covers are interchangeable with aluminum flanges. Made in USA. Black

Category: Square / Rectangle Recessed Box Covers

Floor Box Cover Kit, Includes Flange and Slide Holder, (1) Pre-Wired 20A Duplex Receptacle, Black

Category: Round Recessed Box Covers

Cover Plate, 1-Gang, Type: 1/2" and 2" Screw Plugs, Includes Gasket and Screws, Aluminum

Category: Square / Rectangle Recessed Box Covers

Poke-Thru Device, Assembled, RC7 Series, Black Non-Metallic Cover, Includes 20 Amp Duplex Receptacle and (2) Cat 6 Keystone Connectors

Category: Assembled Poke-Through Units

3-Gang, Cover Plate Flange, Aluminum Metallic, Color: Aluminum. WxL: 13 Inch x 5-3/4 Inch. For use with: 829PFLRT, 829PFL Covers and Accepts MAB6TJ, MAB3S2, CM-MAB and CM Series Inserts in Carpet and Tile Applications.

Category: Square / Rectangle Recessed Box Flanges

<p>Single-gang device plate used to blank off any one (1) of the three (3) gangs in the center compartment, when no devices are used.</p>

Category: Poke-Through Mounting Plates

Poke-Thru Device, Flush, Assembled Unit, Non-Metallic Cover, Color: Black with Plated Brushed Brass Flange. Diameter: 7". Depth: 16-1/2". Includes: Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade), (2) Cat 6 TechChoice Discrete Keystone Connectors and Ortronics TracJack Bezels. For use with Carpet, Wood or Tile Flooring.

Category: Assembled Poke-Through Units

Duplex Cover Plate with Flip Lid, Size: 4-1/4 Inch, Aluminum

Category: Round Recessed Box Covers

Poke-Thru Device, Recessed, Assembled Unit, Metallic Cover, Color: Black (Die Cast). Recessed: 3-1/4". Diameter: 8". Depth: 16-3/4". Includes: (2) Duplex Receptacles (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade). For use with Carpet & Tile Applications

Category: Assembled Poke-Through Units

WMD RFBA6A RFBA COMMUNICATION

Category: Recessed Compartment Box Covers

Brushed aluminum communication cover plate. Allows for up to four communication devices to be mounted in a recessed position within the 880S and 880CS Floor Boxes. Has removable slides for cable egress. NOTE: Not for use with 817C, 827C, and 837C Flanges.

Category: Recessed Floor Box Service Fittings

2-Gang, Adjustable Floor Box, Steel, Depth: 2-15/32". Cubic Inches: 80". Knockouts: (8) 1/2" & (8) 3/4". Adjustments: 1-3/4" (Before Pour) or 1/2" (After Pour).

Category: Recessed Adjustable Floor Boxes

Poke-Thru Device, Recessed, Assembled Unit, Metallic, For Use In 6 Inch Diameter Opening, Recessed 3 1/4 Inch Below Floor Surface, Die-Cast Aluminum Cover Assembly, Available in the Following Powder Coated Finishes: Black, Gray, Nickel, Brass, Bronze, and Aluminum, For Carpet, Tile, Wood And Laminate Concrete Floor Coverings.

Category: Assembled Poke-Through Units