"402-131"

131' Cable Kit, 240V, 1.8A, Coverage: 35 ft².

Category: 240V Floor Warming Cable Kits

LED Area Luminaire, 131 Watt, 120-277 Volt, 70 CRI, 17100 Lumen, 4000K, 0-10V Dimming, Type IV Distribution, Bronze Finish

Category: Outdoor Area LED Lighting

LED Area Luminaire, 131 Watt, 120-277 Volt, 70 CRI, 17100 Lumens, 4000K, 0-10V Dimming, Type III Distribution, Bronze Finish

Category: Outdoor Area LED Lighting

Splice Kit, Heat Shrink, 600V, Conductor Range: 4 AWG - 1/0 AWG, Tubing Size: 1.1" x 8.0". For use Aluminum or Copper Cable in Direct Burial Applications.

Category: Low Voltage Heat Shrink Splice Kits

Service Cable Staple. Size: 1-5/16" Length, 3/4" Width. For use with: SER 6/3. Package Quantity: Box of 100.

Category: Cable Staples

3/4" Strap, 2-Hole, Material: Zinc Plated Steel. For use with: EMT.

Category: Steel 2-Hole Conduit Straps

Jumper, For 2002 Series, Insulated, 2-Way, Light Gray

Category: Terminal Block Jumper Bars

16D 3” x .131” Collated Duplex Nails, Steel

Category: Nails - Galvanized

Assembled Adjacent Insulated Jumper Bar

Category: Terminal Block Jumper Bars

Push-In Type Jumper Bar, Insulated, 2-Way, Nominal Current 32 Amp

Category: Terminal Block Jumper Bars

Adjacent Jumper; Insulated; In = In Terminal Block

Category: Terminal Block Jumper Bars

WAGO 283-402 ADJACENT JUMPER, INSULATED, GRAY

Locknut, Size: 3/4". Material: Zinc Plated Steel. Package Quantity: 100

Category: Steel Conduit Locknuts

WAGO 2000-402

Terminal Lug Kit. Kit contains 6 Lugs. Wire Size: (2) #2 - 300 MCM. Wire Type: Cu/Al. For use with OS400 and OT400 Type Fusible and Non-Fusible Disconnect Switches.

Category: Disconnect Switch Lug Kits

Enclosure Type IP20 Temperature Rating 131 deg F Secondary Voltage 120 VAC Series SBE Frequency Rating 50/60 Hz Power Rating 0.35 kVA Type Encapsulated Midget Phase 1 Insulation 105 deg C Mounting Type Surface Connection Type Lead Wire Dimensions : 4.66 in L x 5.25 in W x 5.99 in H Primary Voltage : 240/480 VAC

Category: 2 - 7.5 KVA Industrial Control Transformers

3" Strap, 2-Hole, Material: Zinc Plated Steel. For use with: Rigid, IMC.

Category: Steel 2-Hole Conduit Straps

Chase Nipple, 3/4 Inch, Malleable Iron

Category: Iron Chase Nipples

Replacement Lamp, Strobe. For use with 131ST, 131DST, 131C, 400ST and 371DST Series Beacons.

Category: Stack Light Accessories

Reducing Washer. Size: 1 x 1/2 Inch. Steel, Zinc Plated. Package Quantity: 100. *Dottie Part # 30106.*

Category: Reducing Washers

M511 Portable Bluetooth Label Printer with Accessories Kit, Includes: (1) AC Adapter (North America), (1) Brady Workstation Product and Wire ID Software Suite (BWS-PWIDS-EM), (1) Hard Case (M511-HC), (1) Indoor/Outdoor Vinyl Label Cartridge (M5C-1500-595-WT-BK), (1) M511 Printer, (1) Magnet (M51-MAGNET), (1) Nylon Cloth Label Cartridge (M4-131-499), (1) Quick Start Guide, (1) Self Laminating Cable Wraps (M4-91-427), (1) Utility Hook (M51-HOOK), (1) Power Brick for M211 & M511 Printers (M211-M511-POWER)

Category: Portable Label Printers

Reducing Bushing, 1 - 1/2 Inch, Threaded - NPT, Bushing Material: Steel.

Category: Steel Reducing Bushings

Conduit Strap, 1-Hole, 3/4 Inch Diameter, Malleable Iron With Hot Dipped Galvanized Finish, For Use With Rigid/IMC/EMT Conduit

Category: Malleable Iron 1-Hole Conduit Straps

Rigid Compression Connector, 3/4 Inch, Steel, Concrete Tight, Used on Threadless Rigid Conduit, UL 514-B

Category: Steel Rigid Conduit Threadless Connectors