"kps125-2"

Switchbox Support Bracket, Bendable Tabs, Steel/Galvanized

Category: Metallic Box Supports

200 Amp Standard Meter Center, Ring Style, 4 Jaws, 1-Phase, 120/240V, 2/4 Distribution, Main Lug, BR Style Branch Breakers, OH/UG Service, NEMA 3R - Rainproof Enclosure, Surface Mount.

Category: Meter Mains - with Distribution

Centi I - Knife

Category: Folding & Lockback Knives

30.5 mm, Heavy-Duty Potentiometers with Legend Plate, 10000 Ohms, 2 Watts, 50V AC/DC. NEMA Rating: 3, 3R, 4, 12, 13.

Category: Potentiometer Pilot Device Kits

#2 15kV 1-Conductor, Shielded Power Cable, Bare Copper Shield (5.59mm), 133% Insulation, 0.76" Insulation O.D., For Cable Tray Use-Sunlight Resistant, Black PVC Jacket.

Category: 15 kV Copper MV-105

Terminal/Lug Kit, Breaker, Molded Case, Power Defense, 225 Amp, 3-Pole, 6 AWG - 300 MCM, PD2, Globally Rated, Frame J-K, Multi-Wire, Aluminum, Frame 2

Category: Molded Case Circuit Breaker Lug Kits

10 PC SHOCKWAVE™ RED HELIX™ Titanium Drill Bit Set, Includes: (2) 1/8" SHOCKWAVE™ RED HELIX™ Titanium Drill Bit(48-89-4605), (1) 9/64" SHOCKWAVE™ RED HELIX™ Titanium Drill Bit (48-89-4606), (1) 5/32" SHOCKWAVE™ RED HELIX™ Titanium Drill Bit (48-89-4607), (1) 11/64" SHOCKWAVE™ RED HELIX™ Titanium Drill Bit (48-89-4608), (1) 3/16" SHOCKWAVE™ RED HELIX™ Titanium Drill Bit (48-89-4609), (1) 7/32" SHOCKWAVE™ RED HELIX™ Titanium Drill Bit (48-89-4611), (1) 1/4" SHOCKWAVE™ RED HELIX™ Titanium Drill Bit (48-89-4613), (1) 5/16" SHOCKWAVE™ RED HELIX™ Titanium Drill Bit (48-89-4617), (1) 3/8" SHOCKWAVE™ RED HELIX™ Titanium Drill Bit (48-89-4621)

Category: Drill / Power / Insert Bit Kits

125-250V AC, 10 Amp. Watertite Two Button, Single Speed, AC & DC Motors.

Category: Pendant Stations

Main Lug Kit. 100 Amp Standard Mechanical Lug Assembly. Wire Range AL/CU (1) #14–1/0 For use with PRL1A and PRL2A Panelboards. Includes: (3) Lugs, (1) Filler Cover, (6) 10-32 x 7/8" Screws and (2) 10-32 x 3/8" Screws. Can be used as Main or Feed-Through distribution

Category: Panelboard Main Lug Kits

100 Amp, 1-Phase, 4 Jaw, Ring-Type. 3-Wire, 120/240, Surface Mount, Top/Bottom Feed, NEMA 3R. Main Disconnect: (1) 100 Amp, 2-Pole 10 kAIC Breaker. 12/24 Distribution. Test Block Bypass.

Category: Meter Mains - with Distribution

20A Power Pack for Occupancy Sensors Features Include Auto ON, Manual ON, Local Switch, Photocell, Latching Relay; Line Voltage Input: 120/208/220/230/240/277V, 50/60Hz; Low Voltage:(24VDC)Input-2mA, Output-225mA. Housing: 1/2" Threaded Nipple w/Locknut (fits on or in a 4" Square Box), RoHS Compliant, Title 24 Compliant, ASHRAE 90.1 Compliant, Gray

Category: Occupancy Sensor Power Packs

Neutral/Ground Lug for BR and CH Series Loadcenters, 125 AMP, #2/0 Maximum Wire Size, Used As an Add-on Neutral or Ground Lug. Suitable For Use with Copper Or Aluminum Conductor. Plug On Neutral.

Category: Load Center Lug Kits

6 AWG, XHHW-2, Stranded Copper, 600/1000V, Green, 1000 ft. Reel.

Category: 6 AWG Stranded Copper XHHW

125 Amp 120/240V, 1-Phase, Metered Earth Burial Pedestal, Bottom Feed, NEMA 3R Receptacles: (1) 14-50R, (1) NEMA TT-30R, (1) 5-20R2GFI Breakers: (1) 2-Pole 50 Amp, (1) 1-Pole 30 Amp, (1) 1-Pole 20 Amp

Category: Metered Temporary Power Outlets

4-in-1 Electronics Screwdriver, Overall Length: 6.5", Blade Length: 2.8", Type: Multi-bit, Rotating Cap For Optimum Control

Category: Multi-Bit Screwdrivers

Hole Saw, Carbide Tipped, Diameter: 7/8" (22 mm), Chuck Size: 1/4", Conduit Size: 1/2", Maximum Cutting Depth: 8 GA

Category: Carbide Tipped Hole Saws

Milwaukee; Drill Bit; 44 Magnum; Bit Diameter: 5/8 In; Overall Length: 6 In; Drill Size: 4 In Depth; Shank Type: Sds; Number Of Flutes: 4; Material: Carbide Tipped

Category: Masonry Hammer Drill Bits

Thread Install Rod Hanger With Anglet Bracket, 1/4", Steel/Pregalvanized

Category: Rod & Wire Hangers

FD Device Box, 1-Gang, Dead-End, 3/4 Inch, Malleable Iron, Furnished with Internal Ground Screw

Category: 1-Gang Malleable Iron FS & FD Device Boxes

74.8 Cu. In. Four gang electrical box for use with nonmeatllic sheathed cable - Molded-in splined device holes, leveling ribs - New work residential construction - Polycarbonate - Thermoplastic - Size: D=3 1/4", W=7 5/8", H=3 3/4" - Mount with Stud face mount steel hanger bracket with 1/2" offset and opposite side drywall tabs

Category: Non-Metallic Switch / Outlet Boxes With Brackets

25 Ft Wide Blade Magnetic Tape Measure, Up to 17' of Reach, Anti-Tear Coating Reinforces the first 6" of the Tape Blade, 2-Sided Printing & Belt Clip

Category: Tape Measures & Rulers

Electrician's Step Bit Kit With 3 Step Bits Sized 7/8, 1-1/8, And 1-3/8-Inch For Creating Hole Cutouts In Panels And J-Boxes To Accommodate Most Commonly Used 1/2, 3/4, And 1-Inch Conduit, Two Spiral Flutes On Each Step Drill Bit Remove Chips And Help Pull The Bit Through Material for Faster Cutting, Titanium Nitride Coating Dissipates Heat For Longer Bit Life, 1/4-Inch Hex Shank For Firm, Positive Grip In Impact Driver And Standard Drill, Split Point Tip Quickly Starts Hole Cuts And Prevents Drifting When Pressure Is Added, Kit Comes With A Convenient 1-Ounce Oil Bottle For Lubrication Between Cuts To Prolong Step Bit Life, Rugged Case Snaps Shut With Custom Inserts For Each Bit And Oil Bottle, Total of 17 Hole Sizes

Category: Step Bit Kits

C-H QC123PLOFF LOCK OFF ONLY

Category: Cable-In / Cable-Out Circuit Breaker Handle Locks

LED JC Lamp 4.5W watts 3000K 10-18V 450 Lumen GY6.35 base 20000 hours 82 CRI Non-Dimmable

Category: Bi-Pin Base Miniature LED Bulbs