"1" smurf tube"

Refill Cartridge, Polyester Tape, Dimensions: 1/2" x 18', Color: Black on Clear

Category: Permanent Labels

Compression Lug, 2 AWG, 2 Hole, 1/4" Stud, 5/8 Inch Hole Spacing, Long Barrel, Sight Window, Copper/Tin Plated

Category: 2-Hole Long Barrel Copper Compression Lugs

800 Amp Fuse, Time Delay, Brand or Series: KLDR, Interrupting Rating: 200000 Amp VAC RMS Symmetrical, 20000 Amp VDC, Terminal Type: Cartridge, Rejection, Dimensions: 13/32 Diameter x 1 1/2 Length Inch, Voltage Rating: 600 VAC/300 VDC, Features: Time Delay

Category: Class CC Fuses

2-Gang, 1-Blank 1-Decora/GFCI Device Combination Wallplate, Standard Size, Thermoplastic Nylon, Strap Mount - White.

Category: Blank/Decorator/GFCI Receptacle Plates

Caution -Series Rated System Label, Dimensions: 3.5" x 1.5", Black/Yellow on White

Category: Conductor Identification Labels

Pull Rope, Rot/Mildew Resistance & Unaffected by Chemicals or Water, Diameter: 1/4", Length: 600 ft, Tensile Strength: 1,130 lbs. **Dottie Part 61312**

Category: Pull Rope

Floor Flange, Threaded, 1 Inch, Malleable Iron

Category: Threaded Floor Flanges

Non-Metallic, Entrance End Fitting, NM2000 Series. Size: 3-13/16" Length, 1-3/4" Width, 1-9/16" Height. Includes: 1/2" KO. PVC, Ivory.

Category: Plugmold End Fittings

Fuse, 3 Amp, Fast-Acting, Midget, Melamine, 13/32 Inch x 1-1/2 Inch, 600 Volt, LIMITRON

Category: Fast Acting Midget Fuses

Wire Stripper/Cutter, Strips Two Wire Sizes in a Single Motion, Overall Length: 6-1/4", Capacity: 10, 12, 14 AWG Solid, Yellow Handles

Category: Dual Wire Strippers / Cutters

Fuse, 8 Amp, Time-Delay, Rejection, Glass, 1/4 Inch x 1-1/4 Inch, 250 Volt AC, RoHS

Category: Electronic Time Delay Fuses

1-Gang Extra Duty While-In-Use Cover for GFCI/Decora, Includes Adapter Plates for Duplex and Single Receptacles/Outlets, Polycarbonate, Device Mount Horizontal, Lid - Clear

Category: 1-Gang Weatherproof In-Use Box Covers

1-1/2" Grounding Wedge, Bronze With Tin Plating, For Use With Rigid/IMC Conduit

Category: Ground Wedges

Dottie L H Company Das25 Pc 4310 Drop-in Anchor, 1/4 In Diameter, Unc Thread, 1/4-20 Thread, 20 Tpi, Drill Size: 3/8 In, Stainless Steel, Stainless Steel, For Concrete And Brick

Category: Drop-In Screw Anchors

(3) 12 AWG Conductors and (1) 12 AWG Ground, NM-B, Purple (Some Remaining Yellow Inventory), Solid Copper Conductor, 90°C Insulation, 600V, 250 ft. Package, Non-Metallic Sheathed Cable *** There is a current initiative among manufacturers for Purple to be the default color for 12/3 NM-B instead of the traditional Yellow. As inventories adjust, customers could receive either color. ***

Category: 12 AWG NM-B

Sealing Locknut With PVC Molded Gasket, 1 Inch Diameter, Steel With Zinc Finish

Category: Gasketed Conduit Locknuts

Pilot Drill Bit Sizes: 1/4" - 2-1/4"

Category: Hole Saw Pilot Bits

1-1/2" ENY Seal Fitting, Duraloy Iron, Female/Female

Category: Explosion-Proof 40% Fill Female (Vertical / Horizontal) Sealing Fittings

Cover Control Kit, Type 1, Non-Combination, Box 1 Only, Cover Control Includes: M22 Series STOP/START Oval Pushbuttons and Red RUN Pilot Light (85-264V AC) ***Compatible With Type 1 Non-Combination Cover Control (Box 1 Only), Box 1 Offering Includes FVNR Contactor Sizes 00–2, Electronic FVNR Starters, Size 00–2 And Bi-Metallic FVNR Starters Size 00–1***

Category: Starter & Contactors - Enclosure - Controls

Liquidtight Connector, 2-1/2 Inch, 90 Degree, Malleable Iron With Zinc Chromate Finish, For Use With Metallic Liquidtight Conduit

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

OZ-Gedney Type SGN Solid Cover Sealing Gasket, Trade Size: 1/2 IN, 1/8 IN Thick, Closed-Cell Neoprene, 100 DEG C, Dimensions: 3-15/16 IN Length X 1-15/16 IN Width, For Malleable Iron Conduit Bodies

Category: Neoprene Conduit Body Gaskets

Heavy Duty Cable Pulling Lubricant, Thick Gel, Color: Dyna Blue, Includes: (1) 1-Gallon Pail

Category: Pulling Lubricant

Cold Shrink Three Conductor Breakout Kit, Cable Insulation O.D. Range: 0.92–1.18", Includes: (1) Cold Shrink Silicone Rubber Breakout Boot, (3) 4' Silicone Rubber Phase Rejacketing Sleeve (RJS) Assemblies, (1) Constant Force Spring for Armored Cable Only, (1) Long Tail Tinned Copper Ground Braid With Solder Block – for Armored Cable Only, (3) Strips Scotch® Mastic Strip 2230, (1) Roll Scotch® Super 33+™ Vinyl Electrical Tape, 3/4", (1) Roll, Scotch® Electrical Shielding Tape 24 – for Armored Cable only, Instruction Sheet

Category: Breakout Boots

Eaton Crouse-Hinds series Condulet Form 7 wedge nut cover with integral gasket, Sheet steel, 1-1/4"

Category: Steel Conduit Body Covers With Gaskets