"in wall romex splice"

Interval Timer, 30 Minute, Almond Twist Knob, 20 Amp, 125 - 277 Volt AC, No Hold

Category: In-Wall Spring Wound Time Switches

Interval Timer, 15 Minute, No Hold, 20 Amp, 125 Volt AC, Metal Wallplate

Category: In-Wall Spring Wound Time Switches

250 MCM - 6 AWG Bagged Polaris InsulatedIn-Line SpliceConnector Polaris Insulated In-Line Splice Connectors are suitable for connecting two wires. Abrasion and chemical resistant. UV rated. Will not support combustion. Cold temperature rated to -45 degrees Celsius. Dual rated for use with copper and/or aluminum cables. 600 volts. Not recommended for fine-stranded, flexible wire (see Polaris Grey Series).

Category: ln-Line Splicers/Reducers - Insulated

.312/.156 Thin Wall Heat Shrink, 6 Inch Length, 600 Volt, Round, Polyolefin, Pack of 10

Category: Thin Wall Heat Shrink

NSI300T2 300 MCM-6 PANELBOARD LUG 2 HOLE STACKED MOUNTING HOLE 1 3/8

Category: 2-Conductor Aluminum Mechanical Lugs

Submersible Inline Connector, 2/0 - 14 AWG, Aluminum With EPDM Rubber Insulation, Black, Rate for CU/AL Conductors

Category: In-Line Splicers/Reducers - Submersible

Interval Timer, 2 Hour, Ivory Twist Knob, 20 Amp, 250 Volt AC

Category: In-Wall Spring Wound Time Switches

Interval Timer, 12 Hour, With Hold, 20 Amp, 125 Volt AC, Metal Wallplate

Category: In-Wall Spring Wound Time Switches

Spring Wound Twist Timer, 60 Minute, 125-277 Volt, No Hold, Metal Wallplate

Category: In-Wall Spring Wound Time Switches

Insulated Multi-Cable Connector Block For Fine Stranded Flexible Copper Conductors And For -Wires And In-Line Splicers/Reducers, 600V, Number Of Ports: 2, Wire Range: 10 AWG - 1 AWG, Abrasion And Chemical Resistant, Rated For Use With Copper Conductors

Category: Single Sided Entry Wire Connector Blocks

.375/.187 Thin Wall Heat Shrink, 6 Inch Length, 600 Volt, Round, Polyolefin, Pack of 9

Category: Thin Wall Heat Shrink

TORK 74240-22 Replacement Knob for In-Wall Twist Timer, White

Category: In-Wall Time Switch Replacement Knobs

SUNSET IN-WALL TIMER SUNSET/SUNRISE 120 - 277VAC 3-WAY LIGHT ALMOND

Category: 7 Day Digital Time Switches

Easy-Splice Direct Burial Splice Kit with Rubber Cover 6 AWG - 350 MCM Direct Burial Splice Kits are dual-rated for use with copper and aluminum cable. These kits consist of an in-line mechanical set screw connector pre-filled with oxide inhibitor and an EPDM rubber insulating cover to ensure a watertight seal. Rated 600 Volts APPLICATIONS: Street lights, motor connection, irrigation systems, HVAC, outdoor lighting, and over wire connectors for a secure seal.

Category: Direct Burial Datacom Splice Kits

Insulated Multi-Cable Connector Block For Fine Stranded Flexible Copper Conductors And For 1-Wires And In-Line Splicers/Reducers, 600V, Number of Ports: 2, Wire Range: 14 AWG - 6 AWG, Abrasion And Chemical Resistant, Rated For Use With Copper Conductors

Category: Single Sided Entry Wire Connector Blocks

Easy-Splice Direct Burial UF Stretcher Kit for 14/3 to 8/3 Eliminates the need for using two connectors and a short piece of cable when repairing damaged UF cable. Includes one 11.5" connector that will accommodate 14/3 without GRD minimum and 8/3 with GRD maximum. Utilizes heavy wall shrink with sealant for a quick and reliable repair. 600 Volt Maximum. 105 degrees C.

Interval Wall Timer, 1 Minute-18 Hour Maximum, 12-150 Watt, 24-277 Volt, SPST, White, Flash Warning Before End of Cycle

Category: In-Wall Programmable Time Switches

Spring Wound Twist Timer, 2 Hour, 125-277 Volt, No Hold, Metal Wallplate

Category: In-Wall Spring Wound Time Switches

Dual Rated Aluminum Splice 2 AWG Dual Rated Aluminum Splices are a type of aluminum compression connector that is produced from high conductivity aluminum tubing. Center stop assures proper cable installation. Electro-tin plated for corrosion resistance. Color coded and marked with die index information. Pre-filled with oxide inhibitor and capped with color coded cap.

Category: Standard Barrel Aluminum Compression Sleeves

Easy-Splice Direct Burial Splice Kit with Rubber Cover 14 - 2/0 AWG Direct Burial Splice Kits are dual-rated for use with copper and aluminum cable. These kits consist of an in-line mechanical set screw connector pre-filled with oxide inhibitor and an EPDM rubber insulating cover to ensure a watertight seal. Rated 600 Volts APPLICATIONS: Street lights, motor connection, irrigation systems, HVAC, outdoor lighting, and over wire connectors for a secure seal.

Category: Low Voltage Direct Burial Splice Kits

Interval Wall Timer, 24 Hour Maximum, 3-Way, 24 Volt AC/DC, SPDT, White

Category: In-Wall Programmable Time Switches

Easy-Splice Direct Burial Splice Kit with Rubber Cover 250 - 750 MCM Direct Burial Splice Kits are dual-rated for use with copper and aluminum cable. These kits consist of an in-line mechanical set screw connector pre-filled with oxide inhibitor and an EPDM rubber insulating cover to ensure a watertight seal. Rated 600 Volts APPLICATIONS: Street lights, motor connection, irrigation systems, HVAC, outdoor lighting, and over wire connectors for a secure seal.

Category: Direct Burial Datacom Splice Kits

Interval Timer, 60 Minute, No Hold, 20 Amp, 125 Volt AC, Metal Wallplate

Category: In-Wall Spring Wound Time Switches

Lay In Connector 1/0 - 8 AWG Lay-in connectors offer the ultimate in flexibility. Excellent for grounding and continuous loop applications. Made of 6061T-6 aluminum alloy. Electro-tin plated for low contact resistance. Suitable for use with both copper and aluminum conductors. Rated 600V (2000V max. per UL486B). UL 486A/B Listed. Temperature rating 90 degrees C.

Category: Aluminum Lay-In Lugs