"connector waterproof"

250 MCM - 6 AWG Polaris Vision Tap™ Insulated Multi-Tap Conn 3 Port (Single Sided Entry)

Category: Single Sided Entry Wire Connector Blocks

3/0 - 6 AWG Polaris Vision Tap™ Insulated Multi-Tap Conn 4 Port (Dual Sided Entry)

Category: Dual Sided Entry Wire Connector Blocks

Polaris™ Insulated Multi-Tap Connector, 4 Port (Single Sided Entry), 600 MCM - 6 AWG, 600 Volt, Black, Plastisol

Category: Single Sided Entry Wire Connector Blocks

Polaris™ Insulated Multi-Tap Connector, 3 Port (Single Sided Entry), 250 MCM - 6 AWG, 600 Volt, Black, Plastisol

Category: Single Sided Entry Wire Connector Blocks

4 - 14 AWG Polaris Vision Tap™ Insulated Multi-Tap Conn 6 Port (Single Sided Entry)

Category: Single Sided Entry Wire Connector Blocks

Splice Tap Kit, Conductor Size: 14 AWG - 12 AWG, 2-Conductor, Ground

Category: Splices & Taps

Polaris Vision Tap™ Ins Splice 1/0

Category: ln-Line Splicers/Reducers - Insulated

Ground Rod Connector, 3/8" Pipe Size, 10-4 Wire Size, Silicon Bronze, 0.375" Length

Category: Ground Rod Ground Clamps

Polaris Vision Tap™ Ins Multi-Tap 250 4 Port Dse

Category: Dual Sided Entry Wire Connector Blocks

In-Line Splicer Reducer, 500 MCM - 4 AWG

Category: ln-Line Splicers/Reducers - Insulated

Easy-Splice Gel Stub Splice Kit with Connector, (Hole A) - 14-2/0 AWG - (Hole B) - 6-14 AWG, 1000 Volt, White

Category: Low Voltage Gel Filled Splice Kits

1/0 - 14 Awg Polaris Vision Tap™ Insulated Multi-Tap Conn 4 Port (Single Sided Entry)

Category: Wire Splice Insulators & Covers

Easy-Splice Push On Gel Stub Splice Kit 250 - 500 MCM Quickly and conveniently insulate, seal and protect sub splice connections up to 1,000 Volts. The robust yet compact design is engineered to handle the harsh environment of motor and many other connection applications (including street lights). Specially formulated material provides excellent abrasion resistance, insulation value, and UV resistance. Each cap size is designed to fit a wide range of cable sizes. The expandable design keeps the cap as small as possible allowing it to expand only as much as needed to fit. Rated 105¦C. cULus listed. The kit includes one gel filled cap, one cap clamp, and one phase separator. The kits include three of each one per phase. INSTALLATION: GSS connector kits provide the fastest installation. Simply slide the cover down over the connection and snap the clamp closed. Sealant gel is already in the cap.

Category: Low Voltage Gel Filled Splice Kits

Easy-Splice Gel Tap Splice Kit with Connector for #14 - #2 AWG The Easy-Splice gel tap splice kit provides a fast and simple method for connecting, insulating, and environmentally sealing low-voltage splices. The splice kit is designed for underground and overhead environments and is useful for street lighting applications. The splice kit's dual-rated mechanical connector splices a wide range of cables, including copper and aluminum. The connector's four port design allows maximum inventory flexibility. The sealant gel protects the connection from moisture ingress, corrosion and pollution. The hinged splice closure can be installed over the connector in seconds by simply snapping the cover shut. Qualified to ANSI C119.1-1986 for underground splicing. Rated -40 degrees C to 90 degrees C.

Category: Low Voltage Gel Filled Splice Kits

Easy-Splice Wrap Around Gel Splice Kit - 500 MCM to 6 AWG - 10 Inch Easy-Splice wrap-around gel splice closure sleeves quickly insulate and seal buried electrical connections rated up to 1,000 volts. Engineered to handle direct burial and manhole applications, these splice enclosure sleeves are equally well suited for insulation and jacket repair. Simply wrap and snap the sleeve on any cable in the use range. The sealant gel in the sleeve seals on contact. The splice closure sleeve can be applied on all common compression connectors and low voltage cables, as well as in-line mechanical connectors. Qualified to ANSI C119.1-1986 for underground splicing. A minimum seal length is required on each side of the connector opening or jacket damage. Use this guideline for minimum seal distance: WAGS-4/0 Series: 1.50" each side WAGS-500 Series: 2.20" each side WAGS-750 Series: 3.00" each side

Category: Low Voltage Heat Shrink Splice Kits

Easy-Twist™ Crimp Sleeve, 14-8 AWG, Steel, Package of 50

Category: Steel Crimp Connectors

Splice Kit, Conductor Size: 14 AWG - 12 AWG, 3-Conductor, Ground.

Category: Splices & Taps

1 Port Panelboard Lug 600 MCM - 2 AWG Large size set screw connectors with multiple mounting holes for a secure, turn-prevent connection. Made of 6061T-6 aluminum alloy. Tin plated for low contact resistance. For use with copper or aluminum conductors. 600V (2000V max, per UL486B). UL 486A/B Listed. Temperature rating 90 degrees C. All hole spacing is NEMA standard of 1.75".

Category: Aluminum Panelboard Lugs

Splice Tap Kit, Conductor Size: 14 AWG - 12 AWG, 2-Conductor, Ground.

Category: Splices & Taps

350 MCM - 6 AWG Polaris Vision Tap™ Insulated In-Line Splice

Category: Wire Splice Insulators & Covers

Insulated Cable Connector Block for 2-Wires and In-Line Splicers/Reducers, 600V, Connections: Opposite Sides, Number of Ports: 2, Wire Range: 6 AWG - 3/0 AWG, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Dual Sided Entry Wire Connector Blocks

Insulated Cable Connector Block for 2-Wires and In-Line Splicers/Reducers, 600V, Connections: Opposite Sides, Number of Ports: 2, Wire Range: 14 AWG - 1/0 AWG, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Dual Sided Entry Wire Connector Blocks

In-Line Splicer Reducer, 600 MCM - 6 AWG, Polaris

Category: ln-Line Splicers/Reducers - Insulated

Easy-Splice Copper Direct Burial Butt Splice Kit, 14 - 8 AWG, 105 Degrees Celsius Termperature Rated, 600 Volt Maximum Utilizing a mechanical copper butt splice and a heavy wall heat shrink tubing to create a fully insulated splice for copper conductors only. Temperature Rating: 105 degrees C. 600 Volt Maximum.

Category: Vinyl Insulated Butt Connectors