"35-3/4x66ft-wh"

Combination Coupling, 1/2" EMT to Non-Metallic Sheath Cable, Zinc Die-Cast, Trade Size 1/2", Cable Range 0.250" to 0.612"

Category: Zinc Die Cast Flex To EMT Couplings

Wire Strap Puller, Snatch Strap, Features: Color Coded & No Stripping/Tapping Required, Includes: (3) Straps.

Category: Strap Wire Pullers

THB TY5253M-35 CBL TIE 50LB 1

Category: Non-Releasable Cable Ties

Eaton Series C electronic molded case circuit breaker, F-frame, FDE, Complete breaker, Digitrip 310 RMS, Electronic LSI trip, Three-pole, 80A, 600 Vac, 250 Vdc, 65 kAIC at 240 Vac, 35 kAIC at 480 Vac, Without terminals, 50/60 Hz

Category: 480V Rated Molded Case Circuit Breakers

Hunter, Triplex Aluminum Conductor, (2) 2/0 AWG, (1) 2/0 AWG Neutral, 600V

Category: Triplex URD Direct Burial Wire

Refill Cartridge, Polyester Tape, Dimensions: 0.75" x 21', Color: Black on White, Compatible With: BMP21 Mobile Printer, ID PAL, LABPAL Printers

Category: Permanent Labels

Surecrimp Copper Compression Lug, Conductor Size 350, 2 Holes, 1/2in Bolt Size, 1-3/4in Hole Spacing, Long Barrel, No Sight Window, Tin Plated, UL, CSA

Category: 2-Hole Long Barrel Copper Compression Lugs

KIL WH-4SSG SS 316 THREADED H

Category: Stainless Steel Conduit Hubs With Grounding

Louver Plate Kit (4 Louvers), Size/Dims: 4.75" x 4.50", Material/Finish: Steel/Gray.

Category: Cooling Fan Exhaust Grills

W Series Grill, 13-5/8" x 10-3/8" x 5/8", White

Category: Heater Grills

Split Bolt Connector, Copper Alloy-Bodied, Type SW, Conductor Range: 14 Stranded - 8 Stranded, ACSR Conductor Range: 8 AWG, Conductor Diameter: .073 - .146". For use with Aluminum to Aluminum, Copper to Aluminum and Copper to Copper.

Category: Copper Alloy Split Bolts

Werner; Stepladder; Series 370, Type Ia, Duty Rating; Ladder Height: 5 Ft; Basesize: 21-1/4 In; Material: Aluminum; Load Capacity: 300 Lb; Spread Size: 35-3/4in; Rail: 3 In Front Wide X 1-1-1/4 In Rear Wide; Flange: 7/8 In Front Wide X 1in Rear Back Wide; Approx. Cu. Ft. Per Unit: 2.800; Top Of Section: 5-1/8 In X 12-1/8 In; Step Width: 3 In

Category: 300 Pound Rated Stepladders

3 POLE 100 AMP 100 KA FIXED THERMAL INDUSTRIAL CIRCUIT BRE

Category: 480V Rated Molded Case Circuit Breakers

Screwdriver Set, 1000V Insulated Slotted and Phillips, 9-Piece, Includes: (1) Nylon Case, (9) Screwdrivers: 3/16'', 1/8'', 1/4'', 5/16'', 3/8'', #1, #2, #3

Category: Screwdriver Sets

M12 FUEL™ Installation Drill/Driver Kit, Includes: 3/8" Chuck Head, Offset Driver Head, 1/4" Hex Head and Right Angle Head

Category: Cordless Heavy Duty Drill Drivers

4-3/8 Inch Ceiling Fan/Fixture Box, Adjustable: 16 to 24 Inch, Fixture Support: 50 lbs, Fan Support: 35 lbs, Cubic Inches: 8.0, Metallic.

Category: Octagon Metallic Ceiling Boxes With Hangers

9/16-Inch Hollow Shaft Nut Driver 4-Inch Shaft, Standard length for most applications

Category: 3" Hollow Shaft Nut Drivers

Single Receptacle Outlet, Heavy-Duty Industrial Specification Grade, Smooth Face, 20 Amp, 125 Volt, Back or Side Wire, NEMA 5-20R, 2-Pole, 3-Wire, Self-Grounding - Gray

Category: 20 Amp Industrial Grade Receptacles

Auger, D'VersiBit System, Length: 72", Bit Diameter: 9/16", Shaft Diameter: 3/16", Type: A

Category: Flexible Steel Drill Bits

Handle for Concept Wall Mount Enclosures, Non-Locking, Size/Dims: fits Doors, Material/Finish: Cast/Black.

Category: Enclosure Handle Kits

Heat Shrink, Heavy Wall, Cross-Linked Polyolefin Tubing, 1 kV, Conductor Range: 8 AWG - 1/0 AWG, Shrink Ratio: 3:1, Insulation Diameter Range: 0.20" - 0.80", Relaxed Tube Length: 9". Provides: Abrasion, Corrosion and Chemical Resistance in Submersible and Direct Burial Applications.

Category: Heavy Wall Heat Shrink

Assembled Jumper Bar without IP20 Protection. 3 Pole. 32 Amp. Type: BJM62. Used with Block Type: D 4/6.LNTP, DR 4/6.

Category: Terminal Block Jumper Bars

TS Bracket, Handy Box, Welded, Metallic. Dimensions: 4" x 2". Depth: 2-1/8". Side Knockouts: (5) 1/2". Bottom Knockouts: (3) 1/2". Cubic Inches: 16.5". Setback: 1/2".

Category: Metallic Handy Boxes With Brackets

200 Amp, 1-Phase, 4 Jaw, Ring-Type. 3-Wire, 120/240V, Surface Mount, Top Feed, NEMA 3R. Main Disconnect: (1) 200 Amp, 2-Pole, 10 kAIC Breaker. Includes: Test Block Bypass (Commonly used for Commercial Applications).

Category: Meter Mains - without Distribution