"50010"

ShrinkTrak Labels, 1-Sided, Unslit, .187" (4.74mm), PO-X, White, 1000/box

Category: Heat Shrink Wire Marker Labels

BRA 50010 PREPRINTED KVA MARK

GRE 50010 PISTON STRIKING

Heat Shrink Tubing, 4' Long Stick, Thick Wall Adhesive Lined, Up to 3.5:1, 1/2", 13/4 dia, PO, Black

Category: Heavy Wall Heat Shrink

Heat Shrink, Heavy Wall, Cross-Linked Polyolefin Tubing, 1 kV, Conductor Range: 12 AWG - 6 AWG, Shrink Ratio: 3:1, Insulation Diameter Range: 0.15" - 0.40", Relaxed Tube Length: 48". Provides: Abrasion, Corrosion and Chemical Resistance in Submersible and Direct Burial Applications.

Category: Heavy Wall Heat Shrink

Rayntite Single Gang Weatherproof Cover Duplex

Category: 1-Gang Metallic Weatherproof Box Covers

Measuring Tape, Pull Line, Diameter: 3/4", Length: 1,000 ft, Tensile Strength: 2,500 lbs.

Category: Measuring Pulling Tape

Steel, Base and Cover, 1500 Series. Size: 10' Length, 1-9/16" Width, 11/32" Height. Includes: 9/32" Mounting on 8" Centers. .040" Galvanized Steel

Category: Metallic Overfloor Raceway

10 Amp IEC Low-Break Fast-Acting Glass Fuse, 5mm x 20mm, 250V, RoHS

Category: Electronic Fast Acting Fuses

Extension Cord, 3-Conductor, 300V, 16/3 Wire Gauge, 25 Feet Length, Yellow

Category: Contractor Grade Extension Cords

Beam Clamp, Malleable, 1", 1-5/8" High, 1/4-20 Threads

Category: Beam Clamps - Adjustable

Extension Cord, 3-Conductor, 300V, 16/3 Wire Gauge, 50 Feet Length, Yellow

Category: Contractor Grade Extension Cords

Heat Shrink Tubing, 4' Long Stick, Medium Wall Adhesive Lined, Up to 4:1, 1/2", 12/3 dia, PO, Black, 6/pkg

Category: Heavy Wall Heat Shrink

Flexible Current Probes, Meter Accessory, Maximum Rating: 2500A AC, Features: Accommodates Awkward Sized or Shaped Conductors

Category: Electrical Tester Accessories

Easy-Splice Wrap Around Gel Splice Kit - 500 MCM to 6 AWG - 10 Inch Easy-Splice wrap-around gel splice closure sleeves quickly insulate and seal buried electrical connections rated up to 1,000 volts. Engineered to handle direct burial and manhole applications, these splice enclosure sleeves are equally well suited for insulation and jacket repair. Simply wrap and snap the sleeve on any cable in the use range. The sealant gel in the sleeve seals on contact. The splice closure sleeve can be applied on all common compression connectors and low voltage cables, as well as in-line mechanical connectors. Qualified to ANSI C119.1-1986 for underground splicing. A minimum seal length is required on each side of the connector opening or jacket damage. Use this guideline for minimum seal distance: WAGS-4/0 Series: 1.50" each side WAGS-500 Series: 2.20" each side WAGS-750 Series: 3.00" each side

Category: Low Voltage Heat Shrink Splice Kits

3M QCI-500-1000-U SHEARBOLT C

Abb; Electronic Time Relay; Ct-erd 12, On-delay; Timing Range: 05 S - 100 Hr; Coil: 24 - 240 Vac, 24 - 48 Vdc; Contact Configuration: 1 C/o; Contact Rating: 250v, 6 Amp; Mounting: Din Rail (en 60715), Snap-on; Connection: Fine Strand With Wire End Ferrule: (2) 20 - 16 Awg/(1) 20- 14 Awg, Fine Strand Without Wire End Ferrule: (2) 20 - 16 Awg/(1) 20- 14 Awg, Rigid: (2) 20 - 16 Awg/(1) 20- 12 Awg; Enclosure: Ip50 (enclosure), Ip20 (terminal); Size: 0.69 In Width X 2.76 In Heightx 2.28 In Depth; Operating Cycles: Mechanical Switching: 30000000 Cycles, Electrical Switching: 100000 Cycles; Operating Temperature: -20 To +60 Deg C; Environmental Conditions: Storage Temperature: -40 To 85 Deg C, Damp Heat: 95 Pct Rh; Switching Current: 100 Milamp Minimum; Switching Current: 6 Amp At 230 Vac (resistive), 3 Amp At 230 Vac (inductive), 6 Amp At 24 Vdc (resistive), 2 Amp At 24 Vdc(inductive); Recovery Time: Less Than 50 Ms; Accuracy: Less Than 005 Pct Withinthe Rated Control Supply Voltage, Less Than 06 Pct Within The Temperature Range;amperage Rating: 53.52 Milamp At 115 Vac, 61.1 Milamp At 230 Vac, 14.7 Milamp At24 Vdc; Output Circuit: 15-16/18; Indicator: Green LED For Supply Voltage, Yellow LED For Relay Status; Stripping Length: 7 Mm; Contact Material: Cd-free; Tightening Torque: 0.5 - 0.8 N-m; Switching Voltage: 12 V Minimum

Category: DIN Rail Mount Timing Relays

500106 1/2'' FLEX HOSE 10''

Rails for interior installation, for CM, TP, material: Sheet steel, surface: Zinc-plated, supply includes: Assembly parts, description: For mounting on the existing threaded bolts. With TS system punchings on three sides. Packaging Unit: 4 pc(s).

Category: Rack Mounting Kits & Hardware

RIT 5001082 CM CABLE CLAMP F-

CRO 500-1055 POST MOUNT BRACK

CRO 500-1063 BOLT C/W WING CONNECTOR

THB 50010HN BRONZE NUT 1/2-13

CM CABLE CLAMP F/ 0600W