Raceway Boxes - 1-Gang

WMD 5507MAAP 5507 PLATE WITH

Category: 1-Gang Raceway Box Covers & Faceplates

Single gang two-piece screw together round outlet box. Box accepts UL/CSA devices not to exceed 10lbs. (5lbs. per CSA). For use with Pan-Way® LD profile raceway. Dia. = 5.48"D x 1.14"H (139.2mm x 29.0mm). Breakouts for 3/4" or 1" diameter conduit, White.

Category: 1-Gang Raceway Device Boxes

GFCI 3-sided hanging box. Accepts single gang U.S. GFCI (ground fault circuit interrupter) standard electrical devices. Provides increased internal area for connections and excess wire.

Category: 1-Gang Raceway Device Boxes

Single gang snap-on electrical-communication faceplate accepts two (2) 45 x 45mm French power outlet modules or four (4) half size modules

Category: 1-Gang Raceway Device Boxes

Snap-on horizontal communication faceplate designed to accept two SYSTIMAX communication modules (not included). Can be used with PANDUIT surface raceway systems and boxes that accept 70mm faceplates. No additional mounting hardware required, Off White.

Category: 1-Gang Raceway Box Covers & Faceplates

Snap-on vertical communication faceplate. Holds two 1/2-size PANDUIT® Mini-Com® Inserts and four modules. No additional mounting hardware required.

Category: 1-Gang Raceway Box Covers & Faceplates

Snap-on vertical communication faceplate. Holds one 1/2-size Insert (2 modules). Inernational Gray

Category: 1-Gang Raceway Box Covers & Faceplates

Snap-on 2-position sloped horizontal faceplate accepts any Panduit® NetKey® Module. Compatible with Panduit® Fast-Snap™ Outlet Boxes, Surface Raceway Systems, and Pan-Pole™ Outlet Poles, White.

Category: 1-Gang Raceway Box Covers & Faceplates

Single gang two-piece screw together round outlet box. Box accepts UL/CSA devices not to exceed 10lbs. (5lbs. per CSA). For use with Pan-Way® LD profile raceway. Dia. = 5.48"D x 1.14"H (139.2mm x 29.0mm). Breakouts for 3/4" or 1" diameter conduit.

Category: 1-Gang Raceway Device Boxes

Snap-on single gang rectangular communication faceplate. Used to cover one NEMA standard rectangular communication module frame. Module frame screw mounts directly to underside of snap-on faceplate. No mounting device needed. Supplied with two mounting sc

Category: 1-Gang Raceway Box Covers & Faceplates

Snap-on horizontal communication faceplate designed to accept two SYSTIMAX communication modules (not included). Can be used with PANDUIT surface raceway systems and boxes that accept 70mm faceplates. No additional mounting hardware required, White.

Category: 1-Gang Raceway Box Covers & Faceplates

Snap-on horizontal communication faceplate. Accepts one 1/2-size PANDUIT® Mini-Com® Insert and two modules. No additional mounting hardware required, Off White.

Category: 1-Gang Raceway Box Covers & Faceplates

Snap-on vertical communication faceplate designed to accept four SYSTIMAX communication modules (not included). Can be used with PANDUIT surface raceway systems and boxes that accept 70mm faceplates. No additional mounting hardware required, White.

Category: 1-Gang Raceway Box Covers & Faceplates

Snap-on vertical communication faceplate designed to accept four SYSTIMAX communication modules (not included). Can be used with PANDUIT surface raceway systems and boxes that accept 70mm faceplates. No additional mounting hardware required, Off White.

Category: 1-Gang Raceway Box Covers & Faceplates

Single Gang 2-piece Power Source BoxSingle gang two-piece snap together power source box. For use with Pan-Way® LDPH3, 5, 10, or LDS3, or 5 profile raceway. 5.02"L x 3.32"W x 1.31"H (127.6mm x 83.0mm x 33.3mm). Breakouts for 1/2", 3/4", or 1" diameter conduit.

Category: 1-Gang Raceway Device Boxes

Snap-on single gang blank cover faceplate. No additional mounting hardware required, International Gray.

Category: 1-Gang Raceway Box Covers & Faceplates

Snap-on 2-position flush mount faceplate accepts any Panduit® NetKey® Module and most other manufacturers' keystone modules. Compatible with Panduit® Fast-Snap™ Outlet Boxes, Surface Raceway Systems, and Pan-Pole™ Outlet Poles, White.

Category: 1-Gang Raceway Box Covers & Faceplates

Snap-on vertical communication faceplate designed to accept two Nordx/CDT communication modules (not included). Can be used with Panduit surface raceway systems and boxes that accept 70mm faceplates. No additional mounting hardware required, Off White.

Category: 1-Gang Raceway Box Covers & Faceplates

Single Gang Snap-on Horizontal Communication FaceplateSingle Gang Snap-on Horizontal Communication Faceplate, 2 Insert and 4 Modules

Category: 1-Gang Raceway Device Boxes

Workstation Outlet Center™ Offset Box for screw-on faceplates. Two-piece box and bracket accept any NEMA standard screw-on faceplate, International Gray.

Category: 1-Gang Raceway Device Brackets & Plates

Snap-on horizontal communication faceplate designed to accept four SYSTIMAX communication modules (not included). Can be used with PANDUIT surface raceway systems and boxes that accept 70mm faceplates. No additional mounting hardware required, Off White.

Category: 1-Gang Raceway Box Covers & Faceplates

Snap-on Horizontal Communication FaceplaSnap-on horizontal communication faceplate designed to accept two Nordx/CDT communication modules (not included). Can be used with Panduit surface raceway systems and boxes that accept 70mm faceplates. No additional mounting hardware required, Off White.

Category: 1-Gang Raceway Box Covers & Faceplates

Snap-on vertical communication faceplate. Holds one 1/2-size PANDUIT® Mini-Com® Insert and two modules. No additional mounting hardware required, Off White.

Category: 1-Gang Raceway Box Covers & Faceplates

Snap-on 4-position flush mount faceplate accepts any Panduit® NetKey® Module and most other manufacturers' keystone modules. Compatible with Panduit® Fast-Snap™ Outlet Boxes, Surface Raceway Systems, and Pan-Pole™ Outlet Poles, Electric Ivory.

Category: 1-Gang Raceway Box Covers & Faceplates