Search results

4 Inch Diameter, Ceiling/Fixture Box with Bar Hanger, Non-Metallic, Depth: 2-1/4". Cubic Inches: 20". Fixture Weight: 50 lbs. Adjustable Bracket Length: 11.50" - 14.50"

Category: Non-Metallic Adjustable Ceiling / Fixture Boxes

Round Fixture Support Box, 4 Inch Diameter, Nail-On, For Use With Nonmetallic Sheathed Cable

Category: Round Non-Metallic New Work Ceiling / Fixture Boxes

Cover Plate Flange, 1-Gang, Metallic, Brass. W x L: 4-3/4 x 5-3/4 Inch. For Use on: 880S1, 880M1, 880CS1-1, 880CM1-1 Floor Boxes in Carpet Applications.

Category: Square / Rectangle Recessed Box Flanges

4" Diameter Round Non-Metallic Fixture Support Box, Bar Length - Contracted: 18 in, Extended: 24 in

Category: Non-Metallic Adjustable Ceiling / Fixture Boxes

4-11/16" Square, Exposed Work Cover, Type: Combination, (1) Duplex Receptacle & (1) Toggle Switch, 1/2" Raised, Drawn, Metallic. Cubic Inches: 10".

Category: 4-11/16" Square Metallic Box Covers

Composite Lid, R Series, W x L x D: 11" x 21" x 2", Lid Marked: "Street Lighting", Skid Resistant.

Category: Non-Metallic Underground Pull Box Covers

Hole Seal, Size: 1-1/2 Inch, Material/Finish: Steel/Gray Powder Coat

Category: Painted Steel Enclosure Hole Seals

Switch Box with Plaster Ears & Non-Metallic Sheathed Cable Clamps, 3" x 2", 1-Gang, Gangable, Drawn, Metallic. Depth: 2-3/4". Clamp Type: CL-26. Side Knockouts: (6) 1/2" & (4) 21/32" Priouts. Bottom Knockouts: (1) 1/2". Cubic Inches: 14.0".

Category: Metallic Switch / Outlet Boxes

Box support to outside of stud. Standard Packaging Quantity: 100

Category: Enclosure Mounting Bracket Kits

512X Electrical Box Mounting Clip

Category: Metallic Box Supports

2-1/2” Deep, 4” Welded Square Box W/ Built-In Adapter, Internal Adj. 1/2” To 1-1/4”, Red Finish for Fire Alarm Installations

Category: 4" Square Metallic Boxes

ALL 2302-SSK 37 CI 2G DEVICE

Category: Non-Metallic New Work Switch / Outlet Boxes

TopTherm Filter Fan Unit, 115 Volt, 2 Amp, 148.5 x 148.5 x 16 mm, Includes Filter Mat

Category: Enclosure Cooling Fan & Exhaust Packages

Hole Seal, Size: 1-1/4 Inch, Material/Finish: Steel/Gray Powder Coat

Category: Painted Steel Enclosure Hole Seals

RFBA 6G 3.0 IN CIRC CVR FLOOR BOX

Category: Round Recessed Floor Boxes

TopTherm Filter Fan Unit, 115 Volt, 204 x 204 x24mm, Complete Unit Ready For Connection Including Filter Mat

Category: Enclosure Cooling Fan & Exhaust Packages

FM Bracket, 4" Square Box, Welded, Metallic. Depth: 2-1/8". Side Knockouts: (8) 1/2" & (4) 1/2" & 3/4" TKO (eccentric) . Bottom Knockouts: (3) 1/2" & (2) 1/2" & 3/4" TKO (eccentric). Cubic Inches: 30.3". Includes: Ground Screw.

Category: 4" Square Metallic Boxes With Brackets

Handy Box, 1-3/4 Inch Deep, Side Knockouts: (6) 1/2 Inch, End Knockouts: (2) 1/2 Inch, Bottom: (2) 1/2 Inch, Cubic Inches: 15.0, Drawn, Steel

Category: Metallic Handy Boxes

Base/plinth trim panels, side, 100 mm, for base/plinth components front and rear, material: Sheet steel, surface: Spray-finished, color: RAL 7022, supply includes: 2 base/plinth trim panels, Assembly parts, description: For mounting between the base/plinth components. At 200 mm height, two 100 mm base/plinth trims may be used. Base/plinth trims may be installed rotated through 90 deg in order to stabilise bayed base/plinth components. Packaging Unit: 2 pc(s).

Category: Enclosure Mounting Bracket Kits

A Bracket, Handy Box, Welded, Metallic. Dimensions: 4" x 2". Depth: 1-7/8". Side Knockouts: (3) 1/2". Bottom Knockouts: (2) 1/2". Cubic Inches: 13". Setback: 5/8"

Category: Metallic Handy Boxes With Brackets

5-1/2" Round Cover, Metallic, Cover Type: Single Service (2-1/4" Opening). Device Type: Single Receptacle or Data Port. Color: Brass. For use in Carpet Applications.

Category: Round Recessed Box Covers

Adjustable Ring, 3 Gang, 3/4 Inch to 1-1/2 Inch Range, Galvanized Steel

Category: Metallic Switch / Outlet Box Extensions

4 Inch Octagon Box w/Hanger, 1-1/2 Inch Deep, NM Clamps, Side Knockouts: (2) 1/2 Inch, Cubic Inches: 15.5, Metallic

Category: Octagon Metallic Ceiling Boxes With Hangers

4-11/16 Inch Square Fixture Cover, Mud Ring, 1 Inch Raised, Drawn, Ears: 2-23/32 Inch Centers, Cubic Inches: 5.8, Steel

Category: 4-11/16" Square Metallic Box Fixture Covers