"d200m-4803d ditek corporation"

Clamp Meter, Maximum Rating: 400A AC & 600 V AC/DC, Features: True RMS, Includes: Case, Test Leads.

Category: AC / DC Clamp Meters

Switch Rated Female Receptacle W/ Ground, 120/127/208/220 V, 30 Amp, 3 Pole, 4 Wire, Blue

Category: 30 Amp Pin & Sleeve Receptacles

20 Amp, 480 Volt 3-Phase, 5 HP, Pin & Sleeve Receptacle, Industrial Grade, DSN20 Series, NEMA 4X, IP66 + 67. Switch Rated (AC Only)

Category: 20 Amp Pin & Sleeve Receptacles

SelecTone Speaker Amplifier, 120 Volt AC, 0.27 Amp, 110 dB @ 10 ft, Surface Mount, Dimensions: 12-1/4" H x 8" W x 8-1/4" D, NEMA 3R, Color: Gray ***Tone Module Not Included***

Category: Audible Signaling Speakers

Inlet, Enclosure NEMA 3r, Ip54/ip55, Wiring Capacity 10 To 2 Awg, Horsepower Rating 20 Hp At 480 V 3 Phase, Polarity 3 Pole, Ground, Short Circuit Rating 100 Kamp, Application: Metals, Quarry, Automotive And Mining Industries, Standard: Ul,csa, Nom, Iec,

Category: 100 Amp Pin & Sleeve Receptacles

Process Meter, 250 Ohm HART Resistor, Maximum Rating: 1A AC/DC & 1000V AC/DC, Features: 24V Power Supply for Offline Testing, 1200 Ohm Drive Capability, 250 Ohm Resistor Setting, Infrared Port, True RMS, Frequency, Voltage, Amperage, Diode Test, Continuit

Category: Process Meters

Clamp Meter, Multimeter, Maximum Rating: 999A AC/DC & 1000V AC/DC, Features: True RMS, Amperage, Current, Continuity, Frequency & Resistance, Includes: Soft Carrying Case

Category: Clamp Multimeters

Milliamp Process Clamp Meter, Features: 4-20mA, Power Saving, Includes: Batteries, Case, Test Leads.

Category: Process Meters

Multimeter & Clamp Meter Combo Kit, Features: Non-Contact Voltage Detection & True RMS, Includes: Multimeter (117), Clamp Meter (322), Magnetic Meter Hanging Strap (TPAK), Test Leads (TL75) & Carrying Case (C115)

Category: Multimeters

Switch Rated Receptacle, 30 Amp, 480 VAC, 3 Pole, 4 Wire, Ground, Blue

Category: 30 Amp Pin & Sleeve Receptacles

SelecTone Universal Tone Module, 32 Switchable Sounds, Plug-In Installation, Dimensions: 0.84" H x 3.25" W x 2.25" L, Color: Black/White. **Key component of the SelecTone System.**

Category: Sounder Tone Modules

Carrying Case, Polyester, Blk/yel.

Category: Meter / Phone Holders

Strobe, Type: Low Profile, Surface Mount, 120 Volt AC, 0.10 Amp, NEMA 4X, Lens: Red

Category: Non-LED Beacon - Strobe

Current Clamp Accessory, Maximum Rating: 400A AC, Features: Extends Current Range of Multimeter

Category: Electrical Tester Accessories

Replacement Lamp, Strobe. For use with 131ST, 131DST, 131C, 400ST and 371DST Series Beacons.

Category: Stack Light Accessories

Strobe Beacon, Strobe, Color: Red, Voltage: 120V AC, 141ST Series, 80 FPM, NEMA 3R, Height: 5" Diameter: 5-1/2".

Category: Non-LED Beacon - Strobe

Multimeter, Maximum Rating: 10A AC/DC & 1000V AC/DC, Features: True RMS, AC/DC Voltage, AC/DC Amperage, Resistance, Capacitance, Frequency, Temperature & Manual/Automatic Ranging, Includes: 9V Battery, Test Leads, Temperature Probe (80BK) & Users Manual

Category: Multimeters

20 Amp. 125/250V AC. 1 Hp. SPDT. Momentary. Full Shielded Single Switch. HxWxD: 9" x 5.75" x 4.75". 8 lbs. UL Listed.

Category: Heavy Duty Foot Switches

Strobe Beacon, Strobe, Color: Red, Voltage: 120V AC, FB2PST-1 Series, 90 FPM, NEMA 4X, Height: 5-1/4" Diameter: 4".

Category: Non-LED Beacon - Strobe

Strobe Beacon, Strobe, Color: Amber, Voltage: 120V AC, FB2PST-1 Series, 90 FPM, NEMA 4X, Height: 5-1/4" Diameter: 4".

Category: Non-LED Beacon - Strobe

Streamline Low Profile Strobe Light, 12 to 48 Volt DC, 120 Volt AC - 240 Volt AC, Integrated 1/2 Inch Pipe Mount

Category: Non-LED Beacon - Strobe

True-RMS Clamp Meter, AC/DC Voltage: 600, AC/DC Current: 400 Amp, Frequency Limit: 5.0 to 500.0Hz, Safety Rating: CAT III 600V, CAT IV 300V

Category: AC / DC Clamp Meters

DITEK DTK120/240BK1

To accompany all OCC fiber optic enclosures, Optical Cable Corporation developed snap-in fiber adapter plates that are versatile enough to meet any fiber application and durable enough to withstand field installations. All OCC fiber adapter plates guarantee performance parameters for the application specified, and can be pre-loaded into OCC fiber cabinets for easy plug-and-play operability.

Category: LC Fiber Distribution Plates