"812-dfb-a"

Cushion-Grip™ Pass Through Screwdriver Handle Receives Knect™ (M) Sockets Or Adapters, 1/4-Inch Socket Doubles As A Standard 1/4-Inch Bit Holder, Pass Through 90-Tooth Socket Wrench For Driving Hex Nuts On Threaded Rod And Requires Only 4 Degrees Of Swing For Ease Of Use In Tight Space With A 20-Percent Improvement Over 72-Tooth Ratchets, Socket Sizes: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4-Inch And 8 Mm, 10 Mm, 11 Mm, 12 Mm, 13 Mm, 14 Mm, 15 Mm, 17 Mm, 18 Mm; Bits: Ph #1, #2 , T20, T25 Torx® , 5/16-Inch Slotted, Klein Knect™ (M) Specialized 1/4-Inch Flip Socket Adapter Compatible With Klein Tools Pass Through Socket Wrench And Any 3/8-Inch Square Drive Ratchet, 1/4-Inch Magnetic Socket Doubles As A Standard 1/4-Inch Bit Holder, Compact, Modular Storage System With A Clear Lid Is Compatible With Modbox™ And Stackable With Other Cases Of Similar Design, Backwards Compatible With Standard 1/4, 3/8 And 1/2-Inch Drive Sockets With The Included Knect™ Adapters

Category: Sockets & Socket Sets

Floor Box, 2 outlets, Nickel Silver material, 4 Dia. x 3-1/8 in. Size, Green/Silver, Bottom, Side cable entry, Floor Mount, 14.5 cu.in cubic capacity, 3/4 & 1/2 (2 Side), 1/2 (2 Bottom) in. conduit hole, including 15 AMP (TR) Duplex Receptacle

Category: Assembled Recessed Round Boxes

Liquidtight Connector, 3/4 Inch, 90°, Malleable Iron With Zinc Chromate Finish, For Use With Metallic Liquidtight Conduit

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

LED Bollard Retrofit: 11W (Replces up to 50W), 120-277V, Flex Color: Default setting is 4000K (1610lm) but can be changed to 3000K (1550lm) or 5000K (1650lm) with a flip of a switch. Multi-directional mounting capability & 360° design. Use base down, base up or base sideways without affecting performance. Operating Temp: -40°F to 122F°.

Category: Post Top / Site / Wall Pack LED Lamps

Reducing Bushing, 1 - 3/4 Inch, Threaded - NPT, Bushing Material: Steel.

Category: Steel Reducing Bushings

LED Type A+B PL Lamp with FLEXCOLOR: Operates on existing magnetic ballasts or 120-277 VAC, 9 Watt, Color Temperature: 2700K/3000K/3500K/4000K, 1104-1243 Lumens (depending on color selected), Base: G24d

Category: LED Retrofit For Compact Fluorescent Lamps

Clamp Meter With True Rms Provides Accurate And Reliable Measurements Across Various Applications, Measures Ac/Dc Voltage, Ac/Dc Current, Resistance, Dc Micro Amps, Temperature, Diode Test, Continuity, Capacitance, Frequency/Duty Cycle, And Inrush, Transflective Reverse-Contrast Display Provides Excellent Visibility In Both Sunlight And Dark Environments, Illuminated Dial Ensures Clear Visibility And Easy Reading, Even In Low-Light Environments, Features A Low Impedance (Loz) Mode To Identify And Eliminate Ghost Voltages, Preventing False Readings And Ensuring More Accurate Measurements, Integrated Worklight Illuminates The Work Area For Improved Visibility In Dark Or Confined Spaces, Non-Contact Voltage Detection Is Integrated Into The Clamp Jaw, With Audible And Visual Indicators That Intensify As The Clamp Moves Closer To The Voltage Source, Rated Ip40 For Ingress Protection, Withstands Drops From 6.6 Feet (2 M), And Includes Right-Angle Input Test Leads, Thermocouple, Storage Pouch, Instruction Manual, And 3 X Aaa Batteries, Ergonomic Design And Overmold Provide A Comfortable Grip, With Easy Dial Adjustment Using The Thumb, Clamp Body Includes A Side-Mounted Test Lead Holder And A Back Mount That Accommodates An Optional Magnetic Hanger (Cat. Nos. 69445 Or 69417) For Hands-Free Operation

Category: AC / DC Clamp Meters

The 120 V 50/60 Hz. 1800 Watt "T" Stem Mounting The K4100 & K4400 Series Photo Controls feature stem mounting, thermal-type, controls with single and multi-voltage models. Thermal-type photo controls provide dusk-to-dawn lighting control and a delay action, which eliminates loads switching OFF due to car headlights, and lighting. The thermal-type controls feature a cadmium sulfide photocell and a sonic-welded polycarbonate case and lens to seal out moisture. The design utilizes a dual temperature compensating bimetal and composite resistor for reliable long life operation over ambient temperature extremes. These models are California Title 24 compliant.

Category: Stem Mounted Photo Controls

Liquidtight Sealing Gasket, 3/4 Inch, Steel Retainer With Elastomer Seal, STG Series Sealing Gaskets Provide A Seal Between Shoulder of Connector and Sheet Metal Enclosure

Category: Liquidtight Connectors - Accessories

Air Conditioning Disconnect, Pullout, Fused, 30 AMP, 2-Pole, 120/240 VAC, Metallic, Galvanized Steel Enclosure, NEMA 3R. Uses: FLNR Series Fuses. Enclosure Dims: H: 8.70", W: 5.40", D: 3.15".

Category: Metallic Pullout Type Air Conditioner Disconnect Switches

Afci /Gfci Outlet Tester Rt310 Detects The Most Common Wiring Faults In Standard, Afci, And Gfci Electrical Outlets Test Afci Devices By Simulating Arc Fault Conditions Test Gfci Devices By Simulating Ground Fault Conditions Capable Of Detecting A Dual-Open Wiring Fault With Simultaneous Open Neutral And Open Ground Wires (Patent Pending Technology) Tester Delivers Clear Visual Indication Of The Wiring Condition At The Electrical Outlet Designed To Test North American-Style Grounded Electrical Outlets In 120V Ac Circuits (Incorporates A Three-Pin Plug) Electrical Plug Is On A 10-Inch (254 Mm) Flexible Electrical Cord To Access Electrical Outlets In Difficult To Reach Locations Low Battery Indicator And Easily Accessible Battery Compartment; Uses 3 X 1.5V Aaa Alkaline Batteries (Included) Powers Off Automatically After Approximately 2 Minutes Of Non-Use To Conserve Battery Life Built To Withstand A 6.6-Foot (2 M) Drop Catiii 135V Safety Rating Measurement Category Iii Is Applicable To Test And Measuring Circuits Connected To The Distribution Part Of The Building’S Low-Voltage Mains Installation The Rt310 Features A Patent Pending Afci Test Method That Is Unique To Klein Tools

Category: Receptacle Testers

Fusetron Time Delay Midget Fuse, 2 A, 250 VAC, 100/10000 A, Class CC/Supplemental, Cylindrical Body

Category: Time Delay Midget Fuses

WhisperGreen® Select Pick-A-Flow® Single Speed Exhaust Fan, 50-80-110 CFM ***Accepts Control Modules (Sold Separately)***

Category: Exhaust Fans

LEW 6304DFBLRA

Chase Nipple, 2 Inch, Material: Zinc Die Cast, For Use With a Conduit Coupling to Connect Conduit to a Box, or With a Locknut to Connect Two Boxes

Category: Zinc Die Cast Chase Nipples

ALL labels are NEC 2017 compliant, long-lasting, permanent adhesive ensures high-performance results on a variety of metals, paints and man-made materials. Pages include a reference key indicating where each label should be applied in the installation, ensuring proper placement prior to inspection. This kit is more residential oriented. If you are looking for more of a commercial focus, see item 2069591. *Solar Label Value Pack, Red/Orange, 45 per kit, 1/pkg*

Category: Solar Installation Labels

Liquidtight Connector, 1 Inch, Straight, Zinc Electroplated Steel

Category: Straight Steel Liquidtight Flex Connectors

LED T8 UL Type A + B Lamp: 4' T8, 15W, 2100-2200Lm, 120-277v, 82CRI, Color (CCT) Selectable: 3000K/3500K/4000K/5000K/6500K, 0-10V Dimming (Dimming is dependent on the ballast in Type A applications), Hybrid Direct (A) & Bypass (B) - Single/Double Ended Connection.. 15T8/4F/8CCTS/HYB/C 38095

Category: T8 Tubular LED Lamps

Liquidtight Sealing Gasket, 1-1/2 Inch, Steel Retainer With Elastomer Seal, STG Series Sealing Gaskets Provide A Seal Between Shoulder of Connector and Sheet Metal Enclosure

Category: Liquidtight Connectors - Accessories

4" Square, Extension Ring, Drawn, Metallic. Depth: 1-1/2". Side Knockouts: (8) 1/2" & (4) 3/4". Cubic Inches: 22.5". Attaches to Switch Boxes.

Category: 4" Square Metallic Box Extension Rings

Chase Nipple, 1 Inch, Material: Zinc Die Cast, For Use With a Conduit Coupling to Connect Conduit to a Box, or With a Locknut to Connect Two Boxes

Category: Zinc Die Cast Chase Nipples

LED T8 UL Type A + B Lamp: 4' T8, 12W, 1700-1800Lm, 120-277v, 82CRI, Color (CCT) Selectable: 3000K/3500K/4000K/5000K/6500K, 0-10V Dimming (Dimming is dependent on the ballast in Type A applications), Hybrid Direct (A) & Bypass (B) - Single/Double Ended Connection.. 12T8/4F/8CCTS/HYB/C, 38094

Category: T8 Tubular LED Lamps

Liquidtight Connector, 2 Inch, Straight, Zinc Electroplated Steel

Category: Malleable Iron Liquidtight Flex Connectors

Non-Indicating Rejection Fuse Reducer, 600 V, 60 A, Class R, 30 A Fuse

Category: Fuse Reducers