"ga-attrim-6pk"

6 Inch Trim Gaskets, 6-Pack H7 Air-Tite Trim Gasket Kit - Meets California Air Tight Trim Gasketing Requirement

Bonding Termination, Bonding Conductors: 5, Bonding Gauge Range: 14 - 4 AWG. Grounding Conductors: 1, Grounding Gauge Range: 6 - 2 AWG. For Outdoor Use in Residential and Commercial Applications.

Category: Insulated Ground Bars

Deep Strut, Elongated Holes on Back, 1-5/8" Height, 1-5/8" Width, Pre-Galvanized Steel, 12 Gauge, Sold In Multiples of 10 Ft.

Category: Steel Strut with Elongated Holes

Shallow Strut, Elongated Holes On Back, 13/16" Height, 1-5/8" Width, Pre-Galvanized Steel, 14 Gauge, Sold In Multiples of 10 Ft.

Category: Steel Strut with Elongated Holes

Roof Flashing Featuring A 26 Gauge Galvanized Base Fits Pipe 1-1/4"-2", Bass Size: 9"X12"

Category: Flashing - Neoprene Collar

12 AWG THHN/THWN-2 Stranded Copper, 600 volts, Black, 500 foot reel

Category: 12 AWG Stranded Copper THHN

Steel Tie Wire. 16-1/2 Gauge, 400 Ft. Black Annealed. *Dottie Part # 28170.*

Category: Steel Tie Wire

Clamp-On Insulator 12 Gauge Galvanized Steel Bracket 2-1/4 Inch, Porcelain Insulator, Fits Rigid Conduit 1-1/4 - 2 Inch

Category: Wireholders - Clamp-On

Jack Chain. Size: #12 Gauge, 0.105" Diameter. Work Load: 29 lbs. Break Load: 115 lbs. Bright Galvanized Steel. Length: 100 ft. *Dottie Part # 27485.*

Category: Jack Chain

The MILWAUKEE® M18 FUEL™ 16 Gauge Straight Finish Nailer provides peak productivity at your jobsite, delivering unmatched nailing performance without the hassle of a compressor and hose. Leveraging the nitrogen air spring mechanism, the 16 Gauge Straight Finish Nailer allows you to consistently sink nails to your required depth in hard and soft woods while leaving clean nail holes, making for repeatable results and easy filling. The nitrogen air spring mechanism, combined with the POWERSTATE™ Brushless Motor and REDLINK PLUS™ Intelligence, delivers a pneumatic-like nailing response with zero ramp-up time from nail to nail, keeping you productive and efficient throughout your job. This cordless finish nailer features a compact and ergonomic design providing access to tight spaces where nailing is required while limiting fatigue when using the tool. When paired with an M18™ REDLITHIUM™ CP2.0 battery pack, this battery-powered nailer fires up to 700 nails per charge and is fully compatible with all M18™ REDLITHIUM™ batteries. The MILWAUKEE® M18 FUEL™ 16 Gauge Straight Finish Nailer delivers the pneumatic performance that professional carpenters and remodelers demand, with the freedom and convenience of cordless.

Category: Cordless Nail Guns

This Digital Angle Gauge Can Measure Or Set Angles, Check Relative Angles With Zero Calibration Feature, Or Can Be Used As A Digital Level, LEDs Light Up Red, Orange, Or Green Based On How Close The Device's Orientation Is To The User Defined Angle, Bright Reverse Contrast Display Is Easy To See In All Lighting Conditions, Strong Magnetic Base Attaches To Conduit, Pipes, Saw Blades, Vents, Ducts, And Other Ferromagnetic Surfaces, V-Grooves Ensure A Secure Fit On The Contours Of Conduit Or Pipe, Display Auto-Rotates When Upside-Down For Easy Viewing, Water And Dust Resistant With Rating Of Ip54

Category: Levels

3-In-1 Digital Angle Finder Provides Precision Measurements For Inside And Outside Angles, Lengths, And Calculates Simple Miter Cut Angles, Efficient Digital Miter Saw Protractor Function Calculates The Needed Saw Blade Angle To Cut Miter Joints With A Perfect Fit Every Time, Machined Ruler Edges Measure Inside And Outside Angles With An Accuracy Of +/- 0.2-Degree, Bright White Led Display Provides Easy Visibility In All Lighting Conditions, Durable, Rust Resistant Metallic Ruler With Deeply Etched Markings For Long Lasting Clear Readings, Powered By A Single Aaa Battery For An Extended Working Life Time, Compact Design That Is Easy To Store And Carry Around In Pockets, Wide Locking Knob Is Easy To Twist And Firmly Locks The Rulers In Place

Category: Angle Protractors

Safety Plate, Material: Steel, 16 Gauge, Dimensions: 3" x 1-1/2". Package of 100.

Category: Hammer-On Safety Plates

Roof Flashing Featuring A 26 Gauge Galvanized Base Fits Pipe 1/2"-1", Bass Size: 9"X12"

Category: Flashing - Neoprene Collar

Fluorescent Fixture Hanger, Side Mount, 10 Gauge, Use with 2, 3, or 4 Light Fixtures, Material: Steel.

Category: Ceiling Hangers

Digital Angle Gauge and Level, Can Measure Or Set Angles, Check Relative Angles, Or Can Be Used As A Digital Level, 0 To 90-Degree And 0 To 180-Degree Measurement Ranges, Strong Magnetic Base, Includes: Soft Carrying Case And Two AAA Batteries

Category: Levels

Aviation Snips with Wire Cutter, Straight, Cuts 18-22 Gauge Stainless Steel

Category: Aviation Snips

Roof Flashing Featuring A 26 Gauge Galvanized Base Fits Pipe 2-1/2"-4", Bass Size: 12"X16"

Category: Flashing - Steel Type

Straight Cutting Aviation Snips, Forged Serrated Blades Bolt Lock, Flush Pivot Bolt, Up to 22-Gauge Stainless. 18 Gauge Cold-Rolled Steel

Category: Aviation Snips

Metallic Whip with Non-Metallic Fittings, 18 Gauge 120V, 0-10V Dimming, Black/White/Green/Violet/Gray, Class 1 Circuit Applications, Non UL ***USE NEW VERSION, SEE SUB (EPW1865SA-BWGPPK)***

Category: Metallic Armored Cable Whips

(4) 2/0 AWG with (1) Ground, Aluminum, 600 Volts, Feeder Cable. No Jacket.

Category: 4 Conductor Armored Feeder Cable

Jack Chain. Size: #10 Gauge, 0.135" Diameter. Work Load: 43 lbs. Break Load: 170 lbs. Bright Galvanized Steel. Length: 100 ft. *Dottie Part # 27475.* Putup is a box.

Category: Jack Chain

Metallic Whip with Non-Metallic Fittings, 18 Gauge 120V, 0-10V Dimming, Black/White/Green/Violet/Pink, Class 1 Circuit Applications, Non UL

Category: Metallic Armored Cable Whips

Primary Fuse Block. Holds one 2 Pole 13/32" x 1 1/2" Fuse Block. Terminal Block and Fuse Block are rated for wire sizes: 10 - 22 gauge. Includes two 6" long #14 gauge wire. For use with SBE Series Industrial Control Transformers. Includes: Finger Safe Cover Kit.

Category: Transformer Primary Fuse Kits