"el-m1"

Ready-to-use infeed cables to provide supply power for EL LED Enclosure Lights. This Cable Infeed for EL LED Enclosure Lights, ELC2001PBUL item measures 6.56 Ft., 3-Pole, 100-240 VAC, colored Black.

Category: Enclosure Lighting Connector Cables

Bonded Splice, For XR100 Series Rail

Category: Solar Rail Splice Kits

EFO End Fastening Object, End Clamp, 30 - 40 mm, Mill Finish

Category: Solar Module Clamps

LED Exit Sign, Internal Toggle Switch For Red Or Green Letter Color Selection, 120-277 Volt, Ni-MH Backup Battery (Provides 90 Minutes Of Illumination In The Event Of A Power Loss)

Category: Exit Signs - LED

Replacement Battery, Battery Capacity: 4 Amp Hour, 6V, Lead Calcium, Height: 2 3/4", Width: 1 7/8", Depth: 4 1/8", For Lithonia Emergency/Exit Fixtures: ELM/ELM2, ELSQ/ELSQM, ELCC/ELCCT, AFN, QM EL/X EL, LHQM/LQM EL

Category: Emergency Lighting Replacement Backup Batteries

Screw or magnet fixation kit for EL LED Enclosure Lights. This Screw Mounting for EL LED Enclosure Lights, ELA02SF item measures 1.39x1.42x1.44 inches with a material of Steel, Galvanized.

Category: Enclosure Mounting Bracket Kits

Incoming Terminal for 3-Phase Busbar System. 600V Rated. For use with MS116 & MS132 Series Manual Motor Protectors.

Category: Manual Motor Protector Busbars

Arc Flash Hazard Label, Legend: "Warning - Arc Flash Hazard, Appropriate PPE Required. Failure to Comply Can Result in Death or Injury. Refer to NFPA 70 E." Dimensions: 3-1/2" x 5", Includes: 5 Labels

Category: Arc Flash Hazard Labels

IRN BX-TCL-30MM-M1TOP BX TOP CLAMP 30MM MILL

Category: Ballasted Solar Racking Components

Replacement Battery, Single Cell Ni-Cd Battery, 1.2V, Battery Capacity: 1200 Amp Hour, D-4/5AF Cell, 3/4" x 1-5/8", For Lithonia LQM EL N/LE EL N

Category: Emergency Lighting Replacement Backup Batteries

Bonded Splice, For XR10 Series Low Profile Mounting Rail

Category: Solar Rail Splice Kits

Box Support. Type: Old Work. For use with Drywall, Lathe, and Plaster. Maximum Wall Thickness: 1-1/2". Not Sold By The Pair - Order By Piece - Order 2 For 1 Pair.

Category: Metallic Box Supports

Universal invisible end clamp for racking, Aluminum & Stainless Steel

Category: Solar Module Clamps

PVC 3IN-30DEG EL W/BELLEND

Category: Schedule 40 30° Elbows

M1 BLUETOOTH RADIO CHARGER

XR1000 Bonded Structural Splice, 12' Spanning Capability, Aluminum Material, Clear Anodized Finish ***Splice Only, Rails Sold Separately***

Category: Solar Rail Splice Kits

3 Inch PVC 90 Degree Sweep Elbow, 36 Inch Radius, Schedule 40, Gray

Category: 90° PVC Sweeps

Aire All Tile Hook (Includes 2 Lags and Aire Dock)

Category: Solar Mounting Hardware

BONDED SPLICE XR10G-0 US PRODUCTION

Category: Solar Rail Splice Kits

Polyether Adhesive Sealant, M-1 Series, 10 Ounce Cartridge, Black, For Use In Damp, Dry, or Cold Climates, 24 Each Per Case

Category: Adhesive Sealant

Snap-On End Section. Type: FEM6. Color: Gray. Thickness: 2,8 mm. Used with Terminal Block Type: M 2,5/5 except D, M 4/6 except D and G, M 4/6, M 4/6.H and M1, M 1,5/6.HH and ADV, MTC 6, M 6/8 and M 10/10, Package Qty = 20

Category: Terminal Block End Sections

GM-BRC2-01-M1 Ground Mount Rail Connector, Aluminum, for 2 Inch pipe

Category: Solar Ground Mount Hardware

Polyether M-1 Adhesive Sealant, Application: Damp, Dry or Cold Climates, Color: Gray, Includes: (1) 10 oz Cartridge, Case Size: (12)

Category: Adhesive Sealant

Polyether M-1 Adhesive Sealant, Application: Damp, Dry or Cold Climates, Color: White, Includes: (1) 10 oz Cartridge, Case Size: (12)

Category: Adhesive Sealant