"1" smurf tube"

FDC Device Box, 1-Gang, Aluminum Ridge Top, Cast Box. Hub Size: 3/4". Box Depth: 2.69" Includes: Internal Ground Screw. For Use with Threaded Rigid Metal Conduit.

Category: 1-Gang Aluminum FS & FD Device Boxes

200 AMP, 120/240V AC, 1-Phase, Plug On Neutral, Main Circuit Breaker Loadcenter, 16-Space, 32-Pole, Aluminum Bus, Cover: Surface/Flush with Door, NEMA 1- Indoor. Dims: H: 27", W: 14.31", D: 3.88"

Category: 1-Phase Main Breaker Aluminum Bus Load Centers

Threaded Conduit Nipple, 2-1/2 Inch x 8 Inch, Steel, For use with Rigid Threaded Conduit

Category: Steel / Galvanized Steel Conduit Nipples

5-1/2" Mini Magnetic Bubble Level, Width: 3/4", Height: 1-1/2", "no-dog" Bending Attachment, Vials: (4) 0°, 30°, 45°, 90°

Category: Mini Magnetic Levels

Wire Stripper/Cutter, Capacity: 6-12 AWG Stranded, Screw Shearing: 6-32, 8-32, Length: 7-1/8"

Category: Combination Wire Stripper / Cutter Tools

Fiberlyte Lid, R Series, W x L x D: 10" x 15" x 1-3/4", Lid Marked: "Electric", Skid Resistant.

Category: Non-Metallic Underground Pull Box Covers

Service Entrance Cap, Clamp-On, Conduit Size: 3-1/2". Phenolic Insulator, Weather Resistant, Die Cast Copper Free Aluminum. *Dottie Part #: 40045*

Category: Service Entrance Caps - Metallic

Chase Nipple, 1/2 Inch Diameter, Steel Alloy With ZInc Chromate Finish

Category: Steel Chase Nipples

Realtree Xtra Camo Tanto-Pocket Knife, 3-1/2" Blade Length, Handle: Nylon/Rubber, Black

Category: Folding & Lockback Knives

Non-Metallic, Blank End Fitting, 800 Series. Size: 1-1/4" Length, 1/2" Width. PVC, Ivory.

Category: 2-Piece Non-Metallic Raceway End Fittings

FD Device Box, 1-Gang, Aluminum Ridge Top, Cast Box. Hub Size: 3/4". Box Depth: 2.69" Includes: Internal Ground Screw. For Use with Threaded Rigid Metal Conduit.

Category: 1-Gang Aluminum FS & FD Device Boxes

Wall mount – one 1/4" mounting hole.

Category: J-Hook From Wire/Rod & Beam

High Density Slotted Wall Wiring Duct, 1" x 3" x 72", Non-Adhesive, PVC, White, 120ft/Carton ***Cover Sold Separately***

Category: High Density Wire Duct

High-Density Slotted-Wall Wiring Duct, 1" x 2", Non-Adhesive, PVC, White, 120 ft/carton ***Cover Sold Separately***

Category: High Density Wire Duct

1-Gang, Floor Box Cover, Non-Metallic, Cover Type: Dual Service. Device Type: Communication Cable. Color: Brass.

Category: Square / Rectangle Recessed Box Covers

Sealing Fitting, Vertical/Horizontal, 1/2 Inch, Female, 25% Fill, Malleable Iron, For Use With Rigid/IMC Conduit in Close Turing Radius.

Category: Explosion-Proof 40% Fill Female (Vertical / Horizontal) Sealing Fittings

Locknut, Type: Tiger Grip, Size: 1-1/2 Inch, Material: Aluminum, For Use With Rigid/IMC Conduit

Category: Aluminum Conduit Locknuts

Elevator Disconnect, Power Module Switch, 60 Amp, 208 Volt AC, NEMA 1 Enclosure, 120 Volt AC Coil, Key Test Switch, Green Pilot Light, 2 Normally Open/Normally Closed Auxiliary Contacts, 3 Pole Fire Alarm Voltage Monitoring Relay

Category: 3-Pole 480 Volt Elevator Disconnect Switches

Service Cable Staple, 2-1/2 Inch Length, 1-7/8 Inch Width, For use with SER 4/0, Box of 100 Each

Category: Cable Staples

22.5 mm, Heavy-Duty, Pilot Device Enclosure, Gray, Steel, Surface Mount, 1 Element, 1 Contact Block Depth, NEMA 12, 13.

Category: Steel Pilot Device Enclosures

250 Amp Fuse, Time Delay, Brand or Series: KLDR, Interrupting Rating: 200000 Amp VAC RMS Symmetrical, 20000 Amp VDC, Terminal Type: Cartridge, Rejection, Dimensions: 13/32 Diameter x 1 1/2 Length Inch, Voltage Rating: 600 VAC/300 VDC, Features: Time Delay

Category: Class CC Fuses

1 Inch Standard Cable Gland, NPT Thread, Cable Range: 0.748 Inch - 0.984 Inch, Thread Length: 0.709 Inch, Material: Plastic, Color: Black.

Category: Cable Glands - Non-Metallic

Enclosure, NEMA 1, Hinged Cover, 36 x 30 x 8.62 Inch, Steel/Gray

Category: Hinge Cover NEMA 1 Junction Boxes

Plug, Size 1-1/2 Inch, Material Polyethylene, Color Black, For use with Schedule 40 and 80 Conduit

Category: PVC Plugs