"200 series"

Feeds 2000 Series Raceway from an existing wall outlet. Equipped with 1/2" trade size threaded stud, toothed lock washer for grounding, and conduit bushing. Stainless Steel

Category: Small 2-Piece Metallic Raceway Connectors & Adapters

Non-Metallic, Internal Elbow, 2800 Series. Size: 1-1/4" Bend Radius, PVC, Ivory.

Category: 1-Piece Non-Metallic Raceway Elbows

2800 Series Co-extruded design, smooth plastic finish with adhesive backing. Available in 8' (2.44m) lengths, packed 160' (48.8m) per carton. Finish - Ivory

Category: 1-Piece Non-Metallic Raceway

Steel, Power/Data Pole. Color: Gray. Length: 12'5". (2) Spec Duplex Outlets, 20A, 125V. Removable Cover with KO's for Data Connectors.

Category: Steel Power Poles

Non-Metallic, Ortronics® Faceplate, 5500 Series. Size: 4-1/4" Length, 1-11/16" Width. PVC, White.

Category: 1-Gang Raceway Box Covers & Faceplates

AL2400 Series grounding conductor to provide an additional ground to raceway.

Category: Small 2-Piece Metallic Raceway Grounding Clamps

Polycarbonate duplex cover plate with flip lids for carpet. NOTE: For carpet or tile installations. All cover plates are furnished with gasket and three screws. The 895P Polycarbonate Series Cover Plates must be field modified for dual service. Bronze

Category: Round Recessed Box Covers

Complete with combination 1 1/4" and 2" trade size threaded conduit openings and closure plugs. Must be used with a conduit connector (not included) at the adapter assembly plate to maintain fire classification. Finish flange/cover assembly available in gray (GY), black (BK), and brushed aluminum (AL). NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC9AM2TC Series Poke-Thru Devices require a 3" [76mm] diameter hole. Not designed to work with bare concrete or terrazzo.

Category: Poke-Through Cover Assemblies

6" Round, Furniture Feed Cover Assembly, Evolution 6AT Series, Style: Surface, Metallic, Cover Type: Screw Plug - (1) 3/4", (1) 2 to 1-1/4". Material/Finish: Aluminum/Gray Powder-Coat, For Tile, Carpet and Wood Flooring. Includes: (1) 3/4" Conduit Connector, (1) 1-1/4" Conduit Connector and (1) Service Divider. Caution: Not for Use on Concrete Pours Less Than 4 1/2"; Not For Use When Concrete is the Finished Floor.

Category: Poke-Through Cover Assemblies

Non-Metallic, Modular Furniture Adapter, 5500 Series. Size: 4-1/4" Length, 1-7/8" Width. PVC, Fog White.

Category: 1-Gang Raceway Box Covers & Faceplates

For furniture feed applications. Includes two 1/2"" and one 3/4"" trade size conduit connectors. CAUTION: Not for use on concrete pours less than 4 1/2"" (114mm) deep.Not for use when concrete is the finished floor. Use only for tile, carpet, or wood covered floors. NOTE: For carpet or tile installations. All cover plates are furnished with gasket and three screws. The 895P Polycarbonate Series Cover Plates must be field modified for dual service. Finish - Brass

Category: Assembled Poke-Through Units

Wiremold 500sp-1 7/16 Device plate

Category: Recessed Floor Box Service Fittings

8" Round Cover Assembly, Evolution Series, Metallic, Cover Type: Tamper-Resistant Surface, Material/Finish: Die-Cast Aluminum/Bronze Powder-Coat.

Category: Poke-Through Cover Assemblies

Non-Metallic, Pancake Overfloor Raceway. 1400 Series. Size: 50' Length, 3" Width, 20/32" Height. Color: Gray.

Category: Non-Metallic Overfloor Raceway

Non-Metallic, Entrance End Fitting, 5000 Series. Size: 3-9/16" Length, 5-1/16" Width, 1-15/16" Depth. PVC, Black.

Category: 2-Piece Non-Metallic Raceway End Fittings

Used as a vertical corner feed drop to horizontal run of 5400 Series Raceways. Two compartments. Packaged with base and cover. MXN2A08 available in 8' (2.44m) lengths. White

Category: 2-Piece Non-Metallic Raceway Elbows

Accepts three (3) Wiremold Open System inserts or three (3) CM2 Series Open System modules.

Category: Recessed Floor Box Service Fittings

1 1/4" IPS locking nipple for 525 and Multiplex Series fittings. 1" long. Finish - Anodized Aluminum

Category: Recessed Floor Box Service Fittings

Poke-Thru Device, Flush, Assembled Unit, Non-Metallic Cover, Color: Aluminum. Diameter: 7 Inch. Depth: 10 Inch, Includes: Bezels to Accept 4 Ortronics TracJack Modular Jacks and (2) Ortronics Series II Modular Jacks

Category: Assembled Poke-Through Units

Floor Box Assembly, Round, Type: (4) UTP Connectors, Diameter: 4 Inch, (3) 1/2 Inch Knockouts, Material/Finish: Aluminum/Aluminum, Includes: (2) Wiremold Open System Adapters, (2) Ortronics TracJack Adapters, and (2) Ortronics Series II Adpaters, For Use in Raised Floor or Wood Floor Applications.

Category: Assembled Recessed Round Boxes

Prewired 15A quad receptacle can be wired as standard quad receptacle or isolated ground. Flange available painted in gray (GY), black (BK), ivory (VY), and brushed metal finishes in aluminum (AL) and brass (BS). Aluminum and brass flanges shipped with black cover. Brass flange also available with brass colored cover assembly (AB). Aluminum flange also available with aluminum colored cover assembly (AA). RC9 Series Poke-Thru Devices require a 3 1/16 (78mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8 minimum. RC9 Assembled Unit-Brass Flange and Black Slide Holder, 15A Quad Receptacle Standard or IG Finish - Brass

Category: Assembled Poke-Through Units

8" Round Cover Assembly, Evolution Series, Metallic, Cover Type: Tamper-Resistant Surface, Material/Finish: Die-Cast Aluminum/Gray Powder-Coat.

Category: Poke-Through Cover Assemblies

8" Round Cover Assembly, Evolution Series, Metallic, Cover Type: Flush, Material/Finish: Die-Cast Aluminum/Black Powder-Coat.

Category: Poke-Through Cover Assemblies

Non-Metallic, Latching Raceway, 2700 Series. Size: 6' Length, 3/4" Width, 3/8" Height. PVC, Fog White.

Category: 1-Piece Non-Metallic Raceway