"wec-3mr-3-wh"

Explosive Area Terminal Block. Compression Clamp. Type: DR 4/6.P. Color: Green & Yellow. 300V/10A. Size: 4 mm Block, 6 mm Spacing. DIN 3. Wire Size: 18 - 12 AWG. Explosive Area Terminal Block for thermocouple wires, for hazardous locations.

Category: Miniature Feed Through Ground Terminal Blocks

LEV Series IEC Pin & Sleeve Mechanical Interlock, 60 Amp, 480 Volt 3-Phase, 3P, 4W, LEV Series North American-Rated IEC 60309-1 & 60309-2 Pin & Sleeve Mechanical Interlock, Industrial Grade, IP66/IP67/IP68/IP69K, Watertight, Non-Fused - Red

Category: Pin & Sleeve Receptacle Mechanical Interlocks

Din Rail Adapter, Used With G-Frame Molded Case Circuit Breakers.

Category: Circuit Breaker Mounting Kits

Contactor 3p Fvnr 250a Frame L 2no2nc 110-250v Ac/dc Coil

Category: IEC Contactors - 66-Over Amp

Eaton CH 3/4 in Loadcenter Accessories, CH plug-on neutral surface cover for 150A or greater convertible loadcenter, X7

Category: Copper Bus Load Center Covers

Multiwire Line and Load Terminals, Aluminum, 6 Wires per Terminal, Cu Wire, Wire Size Range: 14-2 AWG. For 125 Amp EG-Frame Breakers.

Category: Molded Case Circuit Breaker Lug Kits

35 Amp, 600VAC, Industrial & Electrical Fuses Time Lag (Slo-Blow)

Category: Class CC Fuses

Ground Strap Kit, 8.75" Long, Tin Plated Copper Wire. Includes Cable with Crimped Lugs & Hardware

Category: Cable Tray Bonding Jumpers

Pow-R-Xpress PRL2X Interior, 480/277V, 3PH 4W, 225A, 60 CKT, CU Bus

Category: Panelboard Interiors

Condulet Cast Device Box For Threaded Rigid and IMC Conduit Single Gang Deep

Category: 1-Gang Malleable Iron FS & FD Device Boxes

Condulet Cast Device Box For Threaded Rigid and IMC Conduit 2 Gang Deep 3/4

Category: 2-Gang Malleable Iron FS & FD Device Boxes

LED Lamp, 8W, Bulb: PL-H, Base: G24d, GX24d, G24q & GX24q (2/4-pin CFL), Lumens: 920, CRI: 82, Color Temperature: 3500K, Rated Average Life: 50,000 Hrs., Non-Dimming

Category: LED Retrofit For Compact Fluorescent Lamps

BUSSMAN NJM60200-3CR FUSE BLK

Category: Class J Fuse Blocks

3/8" One-Hole Strap Clip with 7/8" x 0.125 Pin, 1=100

Category: Tool Driven Pins & Studs

MODbox™ Components Easily Interconnect for a Customized Mobile Workstation, Easily Attach and Move the Tool Carrier Onto Any System Side Rail With One-Handed Release, Convenient Steel Rail For Mounting Tools With Belt Clips Or Magnetic Mounts, Create 2, 3, Or 4 Separate Compartments With Two Removable Dividers For Added Modularity, Secure The Tool Carrier Inside The Rolling Toolbox And Medium Toolbox With The Internal Rail Accessory (Cat. No. 54818Mb), Sold Separately

Category: Components Kits

Hex Head Cap Screw. Size: 1/2" x 2". Hex Size: 3/4". 18-8 Stainless Steel. Partial Thread. Package Quantity: 50. *Dottie Part # 69852.*

Category: Hex Head Bolts

Non-Metallic, (3) Compartment Divided Base, 5500 Series. Size: 8ft Length, 7-11/16" Width, 1-11/16" Depth. Ivory.

Category: 2-Piece Non-Metallic Raceway

8 PC Precision Screwdriver Set, Includes: (1) Phillips #000, (1) Phillips #00, (1) Phillips #0, (1) Phillips #1, (1) Slotted 1/16", (1) Slotted 3/32", (1) Slotted 1/8", (1) Slotted 5/32", Color Coded Caps For Easy Identification

Category: Miniature Screwdrivers

DuraGard Female Connector, 50 Amp, 2 Pole 3 Wire, 250 Volts

Category: 50 Amp Pin & Sleeve Connectors

220/240V AC, Replacement Coil, Freedom Series. For use with NEMA Size 3 & IEC Frame Sizes L - N

Category: Starter & Contactor Replacement Coils

Refill Cartridge, Vinyl Tape, Dimensions: 0.75" x 21', Color: White on Blue, Compatible With: Brady BMP 21 Mobile Printer, ID PAL, LABPAL Label Printer Labels

Category: Permanent Tapes

3.5" Magnetic Precision Level, V-Grooved Edge, Vials: (2), Material: Aluminum, Blue. Integral Thumb Winder.

Category: Mini Magnetic Levels

Multi-Bit Screwdriver Features Convenient On-Board Storage of 26 Different Precision Bits And A 3.5 mm Nut Driver, Includes Bits Needed To Repair Most Apple® Products, Barrel Contains Powerful Rare-Earth Magnets For Securing Bits And Fasteners, Industrial-Strength, Double-Sided Bits Are Conveniently Housed In The Handle, Eliminating The Need For A Bulky Bit Block Or Case, Stainless Steel Barrel Provides Great Impact And Wear Resistance, Spin Cap For Optimum And Precise Control, Cushion-Grip Handle For Maximum Comfort, Includes Phillips #000, #00, #0, #1, #2; Slotted 1, 2, 2.5, 3; Hex 0.9, 1.3, 1.5; Hex Security 2, 2.5; TORX® T3, T4; TORX® Security T5H, T6H, T7H, T8H, T10H; Standoff; Pentalobe 2, 5; Y000, Y0 Bits, Apple® Is A Trademark of Apple, Inc., TORX®Is A Registered Trademark of Acument Intellectual Properties, LLC.

Category: Multi-Bit Screwdrivers

Prewired GSLC with 175A Inverter Disconnects, GFDI & PV Disconnects for Two Charge Controllers, FLEXnet DC with 3 Shunts, 120/240V AC Inverter Bypass, Dual AC Inputs.

Category: Inverter / Charger Load Centers