Grounding Products

Metallic Braid, 20 Inch Length, 120 Amp Intensity, Material/Finish: Copper/Tinned

Category: Metallic Grounding Braids

Armored Cable Ground Clamp, Clamp Material: Bronze, Screw Material: Steel, Wire Range: 8 AWG (Solid) - 4 AWG (Stranded), Pipe Size: 1-1/4" - 2". *Dottie Part # 10045.*

Category: Armored Cable Ground Clamps

1-1/2" Grounding Wedge, Bronze With Tin Plating, For Use With Rigid/IMC Conduit

Category: Ground Wedges

Grounding Wire With Screw, 12 AWG Stranded, 7-3/4 Inch Tail Includes #10 Fork Terminal, Green, Bag of 25 Each

Category: Stranded Wire Ground Pigtails

Ground Rod, Copper, Length: 6', Diameter: 5/8", Corrosion Resistant, Average Tensile Strength: 80,000 PSI, Straightness Tolerance: .01" per Linear Foot.

Category: Copper Ground Rods

Insulated Pigtail, 12 AWG Solid Copper Lead stripped 1", Length: 8". Includes: GSH Ground Screw. Package of 100.

Category: Solid Wire Ground Pigtails

Grounding Bus Bar, Pattern: NN, Dimensions: 4" x 12" x 1/4", Material: Copper, Includes: Insulator, SS Brackets & SS Mounting Bolts

Category: Bus Bars

Pipe Ground Clamp, 6 AWG - 250 MCM, 3-1/2 - 4 Inch, Electro-Tin Plated Bronze With Stainless Steel Hardware, Acceptable for Direct Burial.

Category: U-Bolt Ground Clamps

Permaground Copper Grounding Grid, Main Conductor Range 500-250, Tap Range 2-4, Ground Rod Sizes 5/8 to 3/4in, Rebar Sizes #5-#6, UL, CSA

Category: Grounding Grid Connectors

Ground Bar Kit, NN, 24 Inch Length, Copper.

Category: Bus Bars

Molded Case Circuit Breaker Accessory Hardware, Busbar Adapter, 125 Amp, Top, EG-Frame, Series G

Category: Bus Bars

For use with copper-bonded ground rods. These are standard clamps that need a 1/2" Wrench.

Category: Ground Rod Ground Clamps

Permaground Copper Grounding Grid, Main Conductor Range 250-1/0, Tap Range 2/0-1/0, Ground Rod Sizes up to 5/8in, Rebar Sizes #3-#4, UL, CSA

Category: Grounding Grid Connectors

Earth Braid with Integral Palms, Tinned Electrolytic Copper, Length: 300 mm, Section: 10 mm, Width: 12 mm, Hole Diameter: 6.5 mm, Working Range up to 105°C.

Category: Metallic Grounding Braids

Ground Rod, Galvanized, Length: 8', Diameter: 3/4", Corrosion Resistant, Average Tensile Strength: 80,000 PSI, Straightness Tolerance: .01" per Linear Foot.

Category: Galvanized Ground Rods

1/2" Grounding Wedge, Bronze with Tin Plating, For Use with Rigid/IMC Conduit

Category: Ground Wedges

Bronze grounding clamp, #10 SOL - #2 STR AWG conductor size range, 2 1/2" - 4" (63.5mm - 101.6mm) iron pipe size, 4.25" (108.0mm) pipe clamp screw length.

Category: Bare Wire Ground Clamps

Grounding Pigtail, Ring Terminal, Captive GSH Ground Screw, Length: 8"

Category: Stranded Wire Ground Pigtails

Earth Braid with Integral Palms, Tinned Electrolytic Copper, Length: 150 mm, Section: 16 mm, Width: 15 mm, Hole Diameter: 6.5 mm, Working Range up to 105°C.

Category: Metallic Grounding Braids

Flat Tinned Copper Grounding Braid. MBJ30-200-10, 180 A Ampacity, 59.2 kcmil (30 mm²), 7.874" (200 mm), 0.413" (10.5 mm) Hole.

Category: Metallic Grounding Braids

IEC Busbar Support, 60 mm System, Rated Operational Current Ie=630A, Poles=3, Can Be Used For 12x5/10, 20x5/10 & 30x5/10, With Slider To Adapt To The Respective Busbar Size, With Screw Block Inside, Temperature Resistant To 120 °C, Track Resistance CTI 200, Self-Extinguishing To UL 94, RAL 7035, Thermoplastic, Silicon Free, Chlorine Free, Halogen Free, Distance Between Busbar Supports Corresponding To Short-Circuit Strength Diagram, UL Approved

Category: Bus Bars

Aluminum Intersystem Ground Tap, Dual Rated, Main Conductor Range 1/0-8, Tap Range 2-14, Mountable, UL, CSA

Category: Intersystem Ground Taps

Bronze Ground Clamp Connector, 4 AWG - 2/0 AWG, Accommodates IPS 4"

Category: U-Bolt Ground Clamps

Rod Lock Coupler, 3/8" Rod, Steel

Category: Ground Rod Couplings