"4/0 aluminum wire thhn"

Compression Lug, Copper, 2-Hole, Long Barrel with Window, 4/0 AWG Wire, 1/2 Stud Hole, 1.75 Hole Spacing

Category: 2-Hole Long Barrel Copper Compression Lugs

Liquidtight Connector, 1 1/4 Inch, Straight, Bullet Type, Non-Metallic, For Use With Type B Liquidtight Conduit

Category: Straight Non-Metallic Liquidtight Flex Connectors

Conduit Body, Type: C, FM35, Size: 3/4", Material: Malleable Iron.

Category: Type C Iron Conduit Bodies

EMT Compression Connector, 3/4 Inch Diameter, Insulated, Rain Tight, Steel With Zinc Chromate Finish

Category: Steel Raintight EMT Compression Connectors

Aluminum Mechanical Lug, Conductor Range 350-6, 3 Ports, 4 Holes, 1/2in Bolt Size, 1-3/4in Hole Spacing, Tin Plated, UL, CSA

Category: 3-Conductor Aluminum Mechanical Lugs

4 Inch Round Mounting Frame With Drywall Collar

Category: Fixture Mounting Frames & Kits

Conduit Body, Type: LB, FM35, Size: 4", Material: Malleable Iron, Includes: Built-In Pulling Rockers

Category: Type LB Iron Conduit Bodies

M18™ Fuel Surge 1/4" Hex Hydraulic Driver (Tool Only), Includes: (1) M18 FUEL™ SURGE™ 1/4" Hex Hydraulic Driver (Tool Only) (2760-20), (1) Belt Clip & (1) Bit Holder ***Bare Tool Only, Battery & Charger Sold Separately***

Category: Cordless Heavy Duty Impact Drivers

EMT Compression Connector, 1 1/4 inch, Material: Die Cast Zinc

Category: Die Cast Concrete Tight EMT Compression Connectors

4" Recessed Can Light Conversion Kit. 50 lb. Weight Limit.

Category: Recessed Lighting Can Conversion Kits

4/0 AWG, THW, Stranded Copper, 600V, Black, 1000ft Reel. Thermoplastic Insulation (PVC), Sunlight and Heat Resistant to 90°C. Suitable for Wet Locations.

Category: 4/0 AWG THW

Eaton Arrow Hart pin and sleeve receptacle, IP69K Rated, #4 -1/0 AWG, #12 - #16 AWG (pilot), 100A, 3? 480V, Back wire, Red, Nickel plated brass, IP67, Nylon, 3-pole, 4-wire, AHBB100 Back box style, Female, 20 HP, Nylon, 3PH

Category: 100 Amp Pin & Sleeve Connectors

Combination Nut Washer, 1/4"- 20" Thread, 0.564 x 0.575 x 1.575 Inch, Steel with Zinc Finish

Category: Strut Channel Combo Nut Washers

EMT Set Screw Connector, 1-1/4 Inch Diameter, Steel With Zinc Finish, For Use With EMT Conduit

Category: Steel EMT Set Screw Connectors

Rigid Compression Connector, 3/4 Inch Diameter, Insulated, Steel With Zinc Finish, Concrete Tight, and Suitable For Direct Burial, For Use With Rigid/IMC Conduit

Category: Steel Rigid Conduit Compression Connectors

Conduit Body, Type C, 3/4 Inch, Stainless Steel

Category: Type C Stainless Steel Conduit Bodies

4 Ft. T5 LED Lamp, 24 Watt, 120-277V, 3500 Lumens, 5000K, G5 Base, TYPE A+B Hybrid

Category: T5 Tubular LED Lamps

Appleton Heavy-Duty U-Bolt With Hex Nuts, Size: 3/4 IN, Material: Castings: Malleable Iron, Hardware: Steel, Finish: Castings: Hot Dip, Hardware: Mechanically Galvanized, Thread Size: 5/16-18 UNC, For Rigid, IMC And EMT

Category: U Bolts

Sealing Fitting, Vertical, 3/4 Inch, Female, 25% Fill, Malleable Iron, For Close Turning Radius.

Category: Explosion-Proof Female Vertical Sealing Fittings

OMNI #14/1C THHN/THWN-2 YEL

Category: 14 AWG Stranded Copper THHN

Faceplate Kit, 0 Shade Zones, Color: Clear Aluminum

Category: GRAFIK Eye

Innerduct, Plenum-Gard, Non-Metallic Corrugated Flexible Conduit with 900 lb Tape, 1-1/4", Orange, 3200 Foot Reel, No UV Protection, Not Suitable For Outdoor Use, Use in Plenum, Riser & General Purpose Applications

Category: Corrugated Plenum Rated Innerduct

Job Station Step Ladder, Size: 4 ft, Reach Height: 8 ft, Width: 19-7/8", Duty Rating: IAA, Material: Fiberglass, Load Capacity: 375 lbs

Category: 375 Pound Rated Stepladders

Compression Lug, Copper, 1-Hole, Flex, 1/0 AWG Wire, 1/4" Stud Hole, 90° Angle Tongue

Category: 1-Hole Copper Compression Lugs