Search results

PVC Heating Blanket, 30 Inch, 120 Volts, 800 Watt

Category: PVC Heating Conduit Benders

Duplex Receptacle Outlet, Heavy-Duty Industrial Specification Grade, Smooth Face, 20 Amp, 125 Volt, Back or Side Wire, NEMA 5-20R, 2-Pole, 3-Wire, Self-Grounding - Red

Category: 20 Amp Industrial Grade Receptacles

20 Amp, 120/277 Volt, Toggle Locking Single-Pole AC Quiet Switch, Industrial Grade, Self Grounding, External Clamp-Type Terminals, Back & Side Wired, White

Category: Locking Toggle Switch

4" Square, Exposed Work Cover, Type: Single Receptacle (30A), 1/2" Raised, Drawn, Metallic. Cubic Inches: 7.3". Opening: 1.719".

Category: 4" Square Metallic Box Covers

4 Inch Square Extension Ring, 2-1/8 Inch Deep, Welded, Metallic, Side Knockouts: (6) 1/2 Inch and (6) 3/4 Inch, Cubic Inches: 30.3

Category: 4" Square Metallic Box Extension Rings

Part of the PACKOUT™ Modular Storage System, Tear-Resistant 1680D Ballistic Material, Impact Resistant Polymer Base, 48 Total Pockets, Reinforced Side Walls, Load Bearing Harness with Sternum Strap

Category: Backpacks

Closes off open end of 4000 Series Raceway. Has two 1/2" trade size KOs to facilitate end feeding. Gray

Category: Large 2-Piece Metallic Raceway End Fittings

Threaded Conduit Nipple, 1/2 Inch x 12 Inch, Steel, For use with Rigid Threaded Conduit

Category: Steel / Galvanized Steel Conduit Nipples

Right Angle Type K-Clamp, 3/4 inch, Malleable Iron, Hot-Dipped Galvanized.

Category: Malleable Iron EMT Right Angle Type K-Clamps

100 Amp Standard Meter Center, Ring Style, 4 Jaws, 1-Phase, 120/240V, 10 kAIC, 12/24 Distribution, Main Breaker Included BR2100, BR Type Branch Breakers, OH/UG Service, NEMA 3R - Rainproof Enclosure, Surface Mount., ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - with Distribution

Voltage Tester, K-60, Maximum Rating: 600V AC/DC, Features: Indicates Presences of Voltage (120-600V AC/DC), Visually Indicates Voltage Level and Type & Low Impedance

Category: Voltage & Continuity Testers

Drop In Anchor. Bolt Size: 1/4 Inch - 20. Drill Bit Size: 3/8 Inch. Thread Depth: 3/8 Inch. Embedment Hole Depth: 1 Inch. Box Quantity: 100

Category: Drop-In Screw Anchors

Ca4-10 Front Mounting Auxiliary Contact Block, (1) N.O. Contact

Category: Starter & Contactor Auxiliary Contacts

Part of the PACKOUT™ Modular Storage System, Constructed with Impact Resistant Polymers, 10 Removable Bins with Dividers

Category: Compartment Boxes

4-Gang, Decora/GFCI Device Decora Wallplate, Midway Size, Thermoplastic Nylon, Device Mount - White.

Category: Midway & Oversized Decorator Wallplates

Switch/Outlet Box, 2-Gang, 2-3/4 Inch Deep, Old Work, Thermoset Fiberglass, 28 Cubic Inches, Includes: Ears, Wing Brackets, and Clamps

Category: Non-Metallic Old Work Switch / Outlet Boxes

Ring Tongues, Vinyl-Insulated, Wire Range: 16 - 14, Stud Size: 1/4, Color: Blue, 25/PK

Category: Vinyl Insulated Ring Tongues

Wireway, Type 1, Hinged Cover, Lay-In, Size/Dims: 6" x 6" x 48", Material/Finish: Steel/Gray. No Knockouts.

Category: Hinged Cover Wireway

Ground Hub, Hub Size: 3/4", Clamp Material: Bronze, Screw Material: Steel, Wire Range: 10 AWG (Solid) - 2/0 AWG (Stranded)

Category: Ground Clamps With Hub

Terminal Strip, Wire Range: 22 - 10 AWG, 10 Circuits, 30 Amps, 600V, Center Spacing: .562", Terminal Screw Size: #8-32 Philsot.

Category: Terminal Strips

Soft Case with Padding and Inside Pocket, Length: 8-1/2", Width: 5", Compatible With: Fluke 25, 27 Series.

Category: Meter / Phone Holders

600 MCM, THHN/THWN-2, Stranded Copper, 600V, Orange, 2000 ft Reel.

Category: 600 MCM Stranded Copper THHN

2-Gang Toggle Device Switch Wallplate, Standard Size, Material: Thermoplastic Nylon, Device Mount - Color: Black.

Category: 2-Gang Toggle Switch Wallplates

Splice Cap Insulator, Non-Metallic, 600V. For use with 2006S Series Crimp Connector Splice Caps. Package of 100.

Category: Crimp Cap Insulators