"floor outlet covers"

20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Decora Plus Duplex Receptacle, Tamper-Resistant, Straight Blade, Hospital Grade, Self Grounding, Surge w/Indicator Light and Audible Alarm, Back & Side Wired, Steel Strap, Includes Wallplate - Red

Category: Tamper Resistant Surge Protection Receptacles

Conduit Body, Type: Mogul LB, Size: 2-1/2", Material: Aluminum. Includes: Cover & Gasket.

Category: Type LB Aluminum Conduit Bodies

Conduit Hub Plate, (3) 3/4 Inch Hubs, Size: 8-1/2 Inch x 4 Inch, Malleable Iron

Category: Explosion-Proof Conduit Outlet Box Canopy Covers

For 881 PVC Floor Box. Kit complete with one (1) 20A duplex 881AV3CTCBS receptacle, (receptacle can be wired as standard receptacle or isolated ground), flange and slide holder, 881ADP Adapter and 881DIV Divider. Provided with Wiremold CM Series Open System unloaded adapter, Ortronics® Series II and TracJack adapters and Extron® Electronics MAAP adapter. CAUTION: Not for use on concrete pours less than 4 1/2" [114mm]. Not for use when concrete is the finished floor. Use only for tile, carpet and

Narrow Slot Wire Duct, 1-1/2" Wide x 15" Deep x 6' Long, PVC, Gray, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT ***Item does not include Cover***

Category: High Density Wire Duct

General Purpose Relay, 24V AC Coil, DPDT, Contact Rating: 10 Amp. Terminal Style: 8 Blade, Plug-In. Maximum Switching Voltage: 300V. Full Featured: Locking Pushbutton, LED, Test Button, Removable ID Tag, Flag Indicator, Finger-Grip Cover. Uses 11 Blade Socket Base

Category: 8-Blade Ice Cube Relays

Wire Duct, Vertical, Slotted, Channel, Front: W x D: 6" x 13.17", Length: 84", Color: Black. Includes: Cover.

Category: Rack Cable Management Devices

NEMA Size 5, Pump Panel, Combination, Flange Handle Disconnect, 400 Amp HMCP Circuit Breaker, 200 Maximum Hp @ 480V, Electronic Overload Relay, 60 - 300 FLA (Full Load Amps), NEMA Type 3R, Rainproof, 480 Volt/ 60 Hz - 440 Volt/ 50 Hz Coil. Cover Control: Start and Reset Pushbuttons, Hand/Off/Auto Selector Switch. 28" W x 60.5" H x 10.6" D

Category: NEMA Size 5 Pump Panels

End & Intermediate Plate, 1 mm Thick, Orange

Category: Terminal Block End Sections

1-Gang, Decora/GFCI Device Decora Wallplate, Midway Size, Thermoplastic Nylon, Device Mount - Red.

Category: Midway & Oversized Decorator Wallplates

KRA JBX161610 16X16X10 PVC JB

Category: Mounting Feet Cover Enclosures

Junction Box, NEMA 4, Hinged Cover, 8 x 6 x 3-1/2 Inch, Steel/Gray

Category: NEMA 4 Wall Mount Enclosures

Wallplate, 3.281IN Box Mounting, Standard: UL 883, Number of Gang: 1, Cutout: (1) 0.625IN ID Hole, Material: Steel, Color: Semi Gloss White

Category: 0.312" Hole Telephone / Cable Wallplates

70 AMP, 120/240V AC, 1-Phase, Main Lug Only Loadcenter, 2-Space, 4-Pole, Copper Bus, NEMA 1 - Indoor. Flush Mount. Cover Included. Dims: H: 9.50", W: 4.50", D: 3.13"

Category: 1-Phase Main Lug Copper Bus Load Centers

125 AMP, 120/240V AC, 1-Phase, Plug On Neutral, Main Lug Loadcenter, 35 kAIC, 22-Space, 24-Pole, Copper Bus, NEMA 1 - Indoor. Cover Size: E

Category: 1-Phase Convertible Copper Bus Load Centers

Plugtail Tamper Resistant Duplex Receptacle, 20A, 125V, Spec Grade, White

Category: Tamper Resistant Specification Grade Receptacles

Conduit Body Gasket, Type: Solid, FM8, Size: 3/4", Material: Neoprene.

Category: Neoprene Conduit Body Gaskets

1-Gang Telephone/Cable Device Wallplate, Hole Diameter: 0.406 Inch, Standard, Strap Mount, Material: Thermoplastic Nylon - Color/Finish: Ivory.

Category: 0.406" Hole Telephone / Cable Wallplates

1-Gang, .625 Inch Hole, Device Telephone/Cable Wallplate, Standard Size, 302 Stainless Steel, Box Mount, Stainless Steel

Category: 0.625" Hole Telephone / Cable Wallplates

Grounding Bonding Intersystem, Aluminum, (1 ) #2 - #6 Main with (4) #4 - #14 Taps with Cover

Category: Intersystem Ground Taps

Plasti-bond Conduit Bodies With Covers Are Offered In Form 8 And Form 7 Styles,each With Numerous Configurations To Provide A Complete Coated Conduit System. May Be Used To Make 90° Bends, For Pull Outlets, To Provide For Taps Or Splices, To Act As A Mounting Outlet For Wiring Devices Or Lighting Fixtures Etc. Electrical Continuity Of The Conduit System Is Maintained Across Assembled Joints.

Category: PVC Coated Type LB Conduit Bodies

Plasti-bond Conduit Bodies With Covers Are Offered In Form 8 And Form 7 Styles,each With Numerous Configurations To Provide A Complete Coated Conduit System. May Be Used To Make 90° Bends, For Pull Outlets, To Provide For Taps Or Splices, To Act As A Mounting Outlet For Wiring Devices Or Lighting Fixtures Etc. Electrical Continuity Of The Conduit System Is Maintained Across Assembled Joints.

Category: PVC Coated Type LL Conduit Bodies

Plasti-bond Conduit Bodies With Covers Are Offered In Form 8 And Form 7 Styles,each With Numerous Configurations To Provide A Complete Coated Conduit System. May Be Used To Make 90° Bends, For Pull Outlets, To Provide For Taps Or Splices, To Act As A Mounting Outlet For Wiring Devices Or Lighting Fixtures Etc. Electrical Continuity Of The Conduit System Is Maintained Across Assembled Joints.

Category: PVC Coated Type LL Conduit Bodies

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LR Conduit Bodies