Search results

3-1/2” Deep, 4” Welded Square Box W/ Built-In Adapter, Internal Adj. 1/2” To 1-1/2”

Category: 4" Square Metallic Boxes

Recessed Light Adapter Plate, Accomodates 2 x 4 Foot or 2 x 2 Foot T-Bar and All Fixtures Sizes 4.3 - 7.7 Inch, 20 Gauge Sheet Steel

Category: Fixture Mounting Frames & Kits

Floor Mount Box Bracket, 18 Inch Height, Steel With Zinc Finish, For Use With 4, 4-11/16, and 5 Inch Square Boxes

Category: Floor Mounted Box/Conduit Supports

Independent Support Clip, 15/16" T-Grid, 1/16" Flange, 1/4" - 20 Thread, 9/16" Screw Length

Category: Fixture Hangers & Kits

Drop-On-Bar Slider Bracket with Conduit, Cable Support Pin Holes

Category: Acoustical T-Grid Ceiling Snap On Fixture / Box Hangers

4 Inch Square Box Cut-In Adapter, Two (2) Integrated Old Work Steel Clips With Screws For Drywall Or Other Wall Materials, Small Footprint Easily Concealed By Life Safety Devices Greater Than 4-7/8” W X 4-3/4” H, Powder Coated Red For Quick Identification Of Fa Devices

Category: 4" Square Metallic Box Mud Rings

Adjustable Ring, 3 Gang, 3/4 Inch to 1-1/2 Inch Range, Galvanized Steel

Category: Metallic Switch / Outlet Box Extensions

Box Mounting Adapter, Far Side Support Up to 4 Inches, Galvanized Steel

Category: Metallic Box Supports

Flat Box Mounting Bracket, 3 Box Positions for 16 Inch Studs, Steel

Category: Metallic Universal Box Mounting Brackets

2" Bridle Ring, 1/4"-10 Thread, Wood Screw, 50 lb Weight Capacity

Category: Plain, Threaded & Wood Screw Bridle Rings

3 Inch Pipe Hanger with Bolt

Category: Conduit Clamps

Roof Coupling Plate, Size 6 x 6 Inch, Diameter 1 Inch, Galvanized Steel

Category: Flashing - Steel Type

Snap On Safety Plate, 3 1/8” X 1 1/2”

Category: Snap-On Safety Plates

Conduit To Flange Clip, Bottom Mount, Snap Close, 1/2” - 3/4” EMT, 5/16” - 1/2” Flange

Category: Flange-Mount Cable/Conduit Clips

Box/Conduit Hanger Support, Horizontal/Vertical Mounting, Fits Up to 12 Inch x 12 Inch Boxes

Category: Conduit Hangers From Wire/Rod & Beam

Conduit Hanger With Bolt, 4 Inch, Steel/Zinc, For Use With Rigid/IMC Conduit

Category: Conduit Clamps

Cable Snap Clip, 1/16” - 3/16” Flange, 0.468" - 0.562"

Category: Flange-Mount Cable/Conduit Clips

4-11/16 Inch Square Extension Ring, Welded, Metallic, Depth: 2-1/8 Inch, Side Knockouts: (2) 1/2 and (10) MKO, Cubic Inches: 42

Category: 4-11/16" Square Metallic Box Extension Rings

Roof Coupling Plate, Size 6 x 6 Inch, Diameter 2 Inch, Galvanized Steel

Category: Flashing - Steel Type

Hammer-On Flange Clip, Bottom-Mount With Stud, 1/8-1/4" Flange Thickness, 1/4" Rod, 1/4"-20 Thread, 3/8" Screw Length, Spring Steel

Category: Flange Clips

Box/Conduit Hanger Support, Horizontal/Vertical Mounting, Fits Up to 6 Inch x 6 Inch Boxes

Category: Enclosure Mounting Bracket Kits

Roof Coupling Plate, Size 6 x 6 Inch, Diameter 1-1/4 Inch, Galvanized Steel

Category: Flashing - Steel Type

Cable/Conduit To Stud Attachment, 1/2” - 3/4” EMT, 1-1/2" Box Depth

Category: Conduit to Stud Supports

NEMA 3R Cabinet, 14-7/8" Wide x 11" Tall x 4-7/8" Deep, Legend: "Television", Steel, Beige.

Category: Outdoor Surface Mount Data, Audio, & Video Enclosures