Search results

1 1/2" Locknut, Material: Stainless Steel

Category: Stainless Steel Conduit Locknuts

Junction Box, NEMA 4X, Continuous Hinge with Clamp Cover, Wall Mount, 16 x 14 x 6 Inch, Stainless Steel Type 316L

Category: Stainless Steel Continuous Hinge Cover Junction Boxes

Conduit Clamp, 3/4 Inch, Type: Right Angle, 316 Stainless Steel, For Use With Stainless/Rigid/IMC/EMT, Also Can Be Used with PVC Coated Conduit

Category: Malleable Iron EMT Right Angle Type K-Clamps

Split Ring Clamp, Diameter 1 Inch, 316 Stainless Steel

Category: Split Pipe Clamps

1 1/4 IN SPLIT COUPLING

Category: Stainless Steel Rigid Conduit Couplings

Eaton Duplex receptacle wallplate, Stainless steel, Duplex receptacle Cutout, Stainless steel, Single- gang, Standard, ED Box1

Category: 1-Gang Blank Wallplates

Eaton Enhanced visible blade single-throw safety switch, Corrosion resistant, enhanced visible blades, 60 A, NEMA 4X, 304 stainless steel, Class H, Three-pole, Three-wire, 600 V, Max Hp: 20, 25/ 30, 50 hp (1/3PH @480, 600 V), #14-#2 Cu/Al

Category: 3-Pole 600 Volt Fused Heavy Duty Safety Switches

For materials up to 3/16ö, these carbide tipped sheet metal Hole Saws produce fine holes in stainless steel or structural steel studs. They can also improve your production in brass, aluminum and other thin sheet materials. Can be used in hand held drills to achieve drill press quality holes. Lubrication during drilling extends the life of the carbide. Milwaukee recommends the use of Hawg Wash« cutting fluid for best results. Hawg Wash« fluid is available in 16 ounce bottles (49-32-0081). One bottle makes one gallon of lubricating solution. 2-1/4 inch diameter. Bullets: 7/8 in. bit diameter For use with quick change arbor 49-57-0035 3/16 in. cutting depth 05547

Category: Carbide Tipped Hole Saws

RRY RSCH116 Conduit hanger 1/2 Inch 316

Category: Conduit Clamps

Starter, Manual, Size M-1, NEMA 4X, Stainless Steel, 3-Pole, Knob, No Heaters

Category: Toggle Manual Starters / Switches

Rigid Strut Strap, Diameter: 3/4 Inch, Material: Stainless Steel, Finish: Stainless Steel, Pre-Assembled, For Use With: GRC, IMC, SCH 40/SCH 80 Conduit

Category: Strut Channel Rigid Conduit Clamps

3/4 IN L-T FLEX CONDUIT COUPLING

Category: Explosion-Proof Type ECGJH Couplings

1/2 IN L-T FLEX CONDUIT COUPLING

Category: Explosion-Proof Type ECGJH Couplings

CLB S61200FB07 1-1/4X3/4 RDC

Category: Stainless Steel Reducing Bushings

Threaded Conduit Nipple, 3/4 Inch x 3 Inch, Stainless Steel

Category: Stainless Steel Conduit Nipples

Conduit Body, Type: LB, FM8, Size: 2", Material: Stainless Steel. Includes: Cover & Gasket.

Category: Type LB Stainless Steel Conduit Bodies

CONDUIT BODY 1/2" SS 316

Category: Type C Stainless Steel Conduit Bodies

Flat Washer. Inside Size: 5/16". Outside Diameter: 3/8". Thickness: 5/64". Stainless Steel. Package Quantity: 100. *Dottie Part # 69888.*

Category: Stainless Steel Flat Washers

Patch Panel, Mini-Com, 24 Port, w/4 CFPLM6BL Faceplates, 1RMU, Black

Category: Unloaded Patch Panels

Cord Connector, SS, 1" NPT, cable range .750 - .875 with mesh

Category: Stainless Steel Strain-Relief Grips With Mesh

Eaton Toggle wallplate, Stainless steel, Toggle Cutout, Stainless steel, Single- gang, Standard, ED Box1

Category: 1-Gang Toggle Switch Wallplates

Eaton Decorator / GFCI wallplate, Stainless steel, Decorator Cutout, Stainless steel, Four- gang, Standard, ED Box

Category: 4-Gang Decorator Wallplates

Square Washer, 7/16 Inch Bolt Hole, 304 Stainless Steel, For Use With 1-5/8 Inch x 1-5/8 Inch Strut

Category: Strut Channel Washers

Eaton Blank wallplate, Stainless steel, Blank Cutout, Stainless steel, Two- gang, Standard, ED Box

Category: 2-Gang Blank Wallplates