"cat 3 splice"

3M 5735 3-CORE LOW VOLTAGE SPLICE

Category: Low Voltage Direct Burial Splice Kits

3m(tm) 3/c Low Voltage Splice Kit 5733, 2/0 Awg-250 Kcmil?

Category: Low Voltage Direct Burial Splice Kits

Splice Kit, Heat Shrink, 600V, Conductor Range: 14 AWG - 8 AWG. Provides Abrasion Resistance and Moisture Ingress for 14/2 with ground thru 8/3 with ground in Direct Burial and Submersible Applications.

Category: Low Voltage Heat Shrink Splice Kits

Low Voltage Splice Kit, 3 Conductor, 2-1/0 AWG, 600V, For Use With Armored Cable, 1 Per Case

Category: Low Voltage Cold Seal Splice Kits

3m(tm) 3/c Low Voltage Splice Kit 5734, 250-500 Kcmil

Category: Low Voltage Direct Burial Splice Kits

Insulator Boot for MD-M & MD-F Series Disconnects, Size 3, 600kV, Thermoplastic Rubber

Category: Low Voltage Motor Lead Splice Kits

Direct Burial Splice Kit, Dual Rated, UF Cable Range 8/3 - 14/2 with Ground, UL, CSA

Category: Low Voltage Heat Shrink Splice Kits

Cold Shrink Inline Splice Kit, 5730 Series, 3 or 4 Conductor, 14 - 10 AWG, 600 Volt, Includes 1 Roll of 3M Sheath Wrap

Category: Low Voltage Cold Seal Splice Kits

Motor Stub Splice Insulator 2 - 2/0 AWG, Bolt Max Length: 1 Inch

Category: Low Voltage Motor Lead Splice Kits

Easy-Splice Direct Burial Roll-On Splice Sleeve for 8 to 2/0 AWG, 1000 Volt, Black

Category: Low Voltage Direct Burial Splice Kits

Easy-Splice H Tap Gel Splice Cover for #2 - 2/0 AWG, 1000 Volt, Black

Category: Low Voltage Gel Filled Splice Kits

THB M2DBOOT-3 INSUL BOOT FOR

Category: Low Voltage Motor Lead Splice Kits

Easy-Splice Wrap-Around 4/0 8"

Category: Low Voltage Gel Filled Splice Kits

Easy-Splice Direct Burial Roll-On Splice Sleeve for 1/0 AWG - 250, 1000 Volt, Black

Category: Low Voltage Direct Burial Splice Kits

Splice Kit, Direct Bury, 600V, Wire Range: 18 AWG - 10 AWG. Includes: (1) Splice Tubes, (1) R/Y Connector.

Category: Low Voltage Direct Burial Splice Kits

Direct Burial Splice Kit, Dual Rated, Conductor Range 250-1, Includes (1) SPA-250 Splice and (2) Pieces of Heat Shrink, UL, CSA

Category: Low Voltage Direct Burial Splice Kits

Easy-Splice H Tap Gel Splice Cover for 6 - 2 AWG The Easy-Splice low-voltage H-Frame closure insulates and seals low-voltage cable-taps and splices made with H-frame compression connectors. The closure utilizes sealing gel material to seal and protect the connection from moisture ingress, corrosion and pollution. To install, simply place the connection on the closure and press the closure together. The low-voltage H-frame closure is ideal for both underground and overhead applications and is especially useful for street lighting applications. Qualified to ANSI C119.1-1986 for underground splicing. Rated -40 degrees C to 90 degrees C, 1,000 volts, UV resistant. The Easy-Splice H tap gel splice covers do NOT include connector. Approved Connectors: Blackburn WR9 Burndy YPC2A8U Homac UB214 NSi Industries WR9 T&B 63105

Category: Low Voltage Gel Filled Splice Kits

600kV Insulator Boot for Disconnect Series MD-M and MD-F, Insulates Body Size 1, Black Thermoplastic Rubber

Category: Low Voltage Motor Lead Splice Kits

THB M2DBOOT-1 INSUL BOOT

Category: Low Voltage Motor Lead Splice Kits

Direct Bury Splice Kit, 18 - 10 AWG, 3.660 Inch Length, UV resistant Tube Prefilled With Moisture Resistant Grease, 600 Volt Rated, Orange/Blue, For Use in Direct Burial Applications

Category: Low Voltage Direct Burial Splice Kits

KUBE Sealant for use with T&B Motor Disconnect Boots, Width 1 Inch, Length 10 Feet, Thickness 1/8 Inch, Polybutene Compound

Category: Low Voltage Motor Lead Splice Kits

Easy-Splice Wrap Around Gel Splice Kit - 500 MCM to 6 AWG - 10 Inch Easy-Splice wrap-around gel splice closure sleeves quickly insulate and seal buried electrical connections rated up to 1,000 volts. Engineered to handle direct burial and manhole applications, these splice enclosure sleeves are equally well suited for insulation and jacket repair. Simply wrap and snap the sleeve on any cable in the use range. The sealant gel in the sleeve seals on contact. The splice closure sleeve can be applied on all common compression connectors and low voltage cables, as well as in-line mechanical connectors. Qualified to ANSI C119.1-1986 for underground splicing. A minimum seal length is required on each side of the connector opening or jacket damage. Use this guideline for minimum seal distance: WAGS-4/0 Series: 1.50" each side WAGS-500 Series: 2.20" each side WAGS-750 Series: 3.00" each side

Category: Low Voltage Heat Shrink Splice Kits

Easy-Splice Direct Burial Roll-On Splice Sleeve for 250 - 600 MCM

Category: Low Voltage Direct Burial Splice Kits

Easy-Splice Dual Rated Direct Burial Butt Splice Kit for 1/0 AWG to 250 MCM Utilizing a mechanical dual rated splice and matched heavy wall heat shrink tubing to create an insulated splice for copper and/or aluminum cables. Temperature Rating: 105 degrees C. 600 Volt Maximum.

Category: Low Voltage Heat Shrink Splice Kits