"c-350 industries, llc"

71 Found
NSI Tork

Insulated Cable Connector, 2 Side Entry, 6 AWG to 350 MCM, AL/CU

Item #: 0264030
CAT #: IT-350
UPC: 662381950086
Company wide:
NSI Tork

Inline Splicer/Reducer, Insulated, 6 AWG - 350 MCM, Black

Item #: 0286640
CAT #: ISR-350
UPC: 662381951038
Company wide:
NSI Tork

Insulated Multi-Tap Connector, 2-Sided, 3-Port, 6 AWG - 350 MCM

Item #: 0264417
CAT #: IPLD350-3
UPC: 662381924018
Company wide:
NSI Tork

Insulated Multi-Tap Connector, 2-Sided, 4-Port, 6 AWG - 350 MCM

Item #: 0264419
CAT #: IPLD350-4
UPC: 662381924025
Company wide:
NSI Tork

Polaris Vision Tap™ Insulated Tap Connector

Item #: 1435728
CAT #: IT-350C
UPC: 662381996527
Company wide:
NSI Tork

5-Port Black Multi-Tap Pre-Insulated Connector, 350 MCM – 10 AWG

Item #: 0365616
CAT #: IPLD350-5
UPC: 662381924032
Company wide:
NSI Tork

Polaris Vision Tap™ Insulated Multi-Tap Connector

Item #: 1435703
CAT #: IPLD350-4C
UPC: 662381996657
Company wide:
NSI Tork

Polaris Vision Tap Insulated Multi-Tap Connector

Item #: 1435702
CAT #: IPLD350-3C
UPC: 662381996602
Company wide:
NSI Tork

Submersible Pedestal Connector, 3 Port, 350 MCM - 12 AWG

Item #: 0141754
CAT #: ISPB350-3
UPC: 662381788955
Company wide:
NSI Tork

Submersible Connector, 2-Port

Item #: 0182961
CAT #: ISPBS350
UPC: 662381787828
Company wide:
NSI Tork

POLARIS EDGE Connector 350 6 Port Blk

Item #: 0020823
CAT #: ISPB350-6
UPC: 662381788979
Company wide:
NSI Tork

POLARIS Ins Multi-Tap 350 3 Port SSE

Item #: 0263994
CAT #: IPL350-3
UPC: 662381914019
Company wide:
NSI Tork

POLARIS Mount Ins Multi-Tap 600 6 Port

Item #: 0250244
CAT #: IPLMD600-6
UPC: 662381789181
Company wide:
NSI Tork

POLARIS Mount Ins Multi-Tap 500 10 Port

Item #: 0250238
CAT #: IPLMD500-10
UPC: 662381945082
Company wide:
NSI Tork

Polaris™ Insulated Multi-Tap Connector

Item #: 0264425
CAT #: IPLD350-8
UPC: 662381924063
Company wide:
NSI Tork

Insulated Multi-Tap Connector, 2-Sided, 10-Port, 6 AWG - 350 MCM

Item #: 0754830
CAT #: IPLD350-10
UPC: 662381924087
Company wide:
NSI Tork

POLARIS EDGE Connector 350 4 Port Clear

Item #: 0121880
CAT #: ISPC350-4
UPC: 662381789020
Company wide:
NSI Tork

Multi-Tap Connector, 8-Port, Black, Insulated, 350 MCM - 6 AWG, 1-Sided

Item #: 0264000
CAT #: IPL350-8
UPC: 662381914064
Company wide:
NSI Tork

POLARIS EDGE Connector 350 3 Port Clear

Item #: 0856899
CAT #: ISPC350-3
UPC: 662381789013
Company wide:
NSI Tork

Multi-Tap Connector, 6-Port, Black, Insulated, 350 MCM - 6 AWG, 1-Sided

Item #: 0263999
CAT #: IPL350-6
UPC: 662381914040
Company wide:
NSI Tork

POLARIS Mount Ins Multi-Tap 250 4 Port

Item #: 0136875
CAT #: IPLMD250-4
UPC: 662381943026
Company wide:
NSI Tork

POLARIS Mount Ins Multi-Tap 500 12 Port

Item #: 0250239
CAT #: IPLMD500-12
UPC: 662381945105
Company wide:
NSI Tork

POLARIS Mount Ins Multi-Tap 600 10 Port

Item #: 0250240
CAT #: IPLMD600-10
UPC: 662381789228
Company wide:
NSI Tork

Polaris™ Insulated Multi-Tap Connector

Item #: 0667839
CAT #: IPLMD350-3
UPC: 662381944016
Company wide:
NSI Tork

Insulated Cable Connector, 2 Side Entry, 6 AWG to 350 MCM, AL/CU

Insulated Cable Connector Block for 2-Wires and In-Line Splicers/Reducers, 600V, Connections: Same Side, Number of Ports: 2, Wire Range: 6 AWG - 350 MCM, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.
Item #: 0264030
CAT #: IT-350
UPC: 662381950086
Company wide:
NSI Tork

Inline Splicer/Reducer, Insulated, 6 AWG - 350 MCM, Black

Insulated Cable Connector Block for 2-Wires and In-Line Splicers/Reducers, 600V, Connections: Opposite Sides, Number of Ports: 2, Wire Range: 6 AWG - 350 MCM, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.
Item #: 0286640
CAT #: ISR-350
UPC: 662381951038
Company wide:
NSI Tork

Insulated Multi-Tap Connector, 2-Sided, 3-Port, 6 AWG - 350 MCM

Insulated Multi-Cable Connector Block, Wire Entry Either Side, 600V, Number of Ports: 3, Wire Range: 6 AWG - 350 MCM, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.
Item #: 0264417
CAT #: IPLD350-3
UPC: 662381924018
Company wide:
NSI Tork

Insulated Multi-Tap Connector, 2-Sided, 4-Port, 6 AWG - 350 MCM

Insulated Multi-Cable Connector Block, Wire Entry Either Side, 600V, Number of Ports: 4, Wire Range: 6 AWG - 350 MCM, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.
Item #: 0264419
CAT #: IPLD350-4
UPC: 662381924025
Company wide:
NSI Tork

Polaris Vision Tap™ Insulated Tap Connector

Polaris Vision Tap™ Insulated Tap Connector, 2 Port (Dual Sided Entry), 350 MCM - 6 AWG, 600 Volt, Plastisol, Clear
Item #: 1435728
CAT #: IT-350C
UPC: 662381996527
Company wide:
NSI Tork

5-Port Black Multi-Tap Pre-Insulated Connector, 350 MCM – 10 AWG

Insulated Multi-Cable Connector Block, Wire Entry Either Side, 600V, Number of Ports: 5, Wire Range: 350 MCM – 10 AWG, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.
Item #: 0365616
CAT #: IPLD350-5
UPC: 662381924032
Company wide:
NSI Tork

Polaris Vision Tap™ Insulated Multi-Tap Connector

Polaris Vision Tap™ Insulated Multi-Tap Connector, 4 Port (Dual Sided Entry), 350 MCM - 6 AWG, 600 Volt, Clear, Plastisol
Item #: 1435703
CAT #: IPLD350-4C
UPC: 662381996657
Company wide:
NSI Tork

Polaris Vision Tap Insulated Multi-Tap Connector

Polaris Vision Tap Insulated Multi-Tap Connector, 3 Port (Dual Sided Entry), 350 MCM - 6 AWG, 600 Volt, Plastisol, Clear
Item #: 1435702
CAT #: IPLD350-3C
UPC: 662381996602
Company wide:
NSI Tork

Submersible Pedestal Connector, 3 Port, 350 MCM - 12 AWG

Submersible Pedestal Connector, 3 Port, 350 MCM - 12 AWG, UL Listed
Item #: 0141754
CAT #: ISPB350-3
UPC: 662381788955
Company wide:
NSI Tork

Submersible Connector, 2-Port

Submersible Connector, 2-Port, 350 MCM - 12 AWG
Item #: 0182961
CAT #: ISPBS350
UPC: 662381787828
Company wide:
NSI Tork

POLARIS EDGE Connector 350 6 Port Blk

350-12AWG Polaris Black InsulatedSubmersible Pedestal Connector -6 port PolarisInsulated Submersible PedestalConnectors are manufactured from high strength 6061-T6 aluminum alloy, providing premium electrical and mechanical performance. Radial tipped set screws reduce conductor strand damage, and the range taking design allows for many sizes and types of conductors- all in one connector. Encapsulated in rubber with a nominal thickness of 125 mils. and high dielectric strength. Abrasion and chemical resistant. UV resistant. Will not support combustion. UL Listed 486B Wire Connector. Meets or exceeds ANSI C119.4 Class A specifications. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. For use with copper and/or aluminum cables.
Item #: 0020823
CAT #: ISPB350-6
UPC: 662381788979
Company wide:
NSI Tork

POLARIS Ins Multi-Tap 350 3 Port SSE

Polaris™ Insulated Multi-Tap Connector, 3 Port (Single Sided Entry), 350 MCM - 6 AWG, 600 Volt, Black, Plastisol
Item #: 0263994
CAT #: IPL350-3
UPC: 662381914019
Company wide:
NSI Tork

POLARIS Mount Ins Multi-Tap 600 6 Port

6 Wire Polaris 600 MCM-6 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL7U and Cold temperature rated to -45 degrees C, rated 600V, 75 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.
Item #: 0250244
CAT #: IPLMD600-6
UPC: 662381789181
Company wide:
NSI Tork

POLARIS Mount Ins Multi-Tap 500 10 Port

10 Wire Polaris 500 MCM-4 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.
Item #: 0250238
CAT #: IPLMD500-10
UPC: 662381945082
Company wide:
NSI Tork

Polaris™ Insulated Multi-Tap Connector

Polaris™ Insulated Multi-Tap Connector, 8 Port (Dual Sided Entry), 350 MCM - 6 AWG, 600 Volt, Black, Plastisol
Item #: 0264425
CAT #: IPLD350-8
UPC: 662381924063
Company wide:
NSI Tork

Insulated Multi-Tap Connector, 2-Sided, 10-Port, 6 AWG - 350 MCM

Insulated Multi-Cable Connector Block, Wire Entry Either Side, 600V, Number of Ports: 10, Wire Range: 6 AWG - 350 MCM, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.
Item #: 0754830
CAT #: IPLD350-10
UPC: 662381924087
Company wide:
NSI Tork

POLARIS EDGE Connector 350 4 Port Clear

350-12 AWG Polaris Clear Insulated Submersible Pedestal Connector - 4 port Polaris Insulated Submersible Pedestal Connectors are manufactured from high strength 6061-T6 aluminum alloy, providing premium electrical and mechanical performance. Radial tipped set screws reduce conductor strand damage, and the range taking design allows for many sizes and types of conductors- all in one connector. Encapsulated in rubber with a nominal thickness of 125 mils. and high dielectric strength. ISPC connectors (clear) allow for an easier installation. Abrasion and chemical resistant. UV resistant. Will not support combustion. UL Listed 486B Wire Connector. Meets or exceeds ANSI C119.4 Class A specifications. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. For use with copper and/or aluminum cables.
Item #: 0121880
CAT #: ISPC350-4
UPC: 662381789020
Company wide:
NSI Tork

Multi-Tap Connector, 8-Port, Black, Insulated, 350 MCM - 6 AWG, 1-Sided

Insulated Multi-Cable Connector Block, Wire Entry One Side, 600V, Number of Ports: 8, Wire Range: 350 MCM - 6 AWG, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.
Item #: 0264000
CAT #: IPL350-8
UPC: 662381914064
Company wide:
NSI Tork

POLARIS EDGE Connector 350 3 Port Clear

350-12AWG PolarisClear InsulatedSubmersible Pedestal Connector -3 port PolarisInsulated Submersible PedestalConnectors are manufactured from high strength 6061-T6 aluminum alloy, providing premium electrical and mechanical performance. Radial tipped set screws reduce conductor strand damage, and the range taking design allows for many sizes and types of conductors- all in one connector. Encapsulated in rubber with a nominal thickness of 125 mils. and high dielectric strength. ISPC connectors (clear) allow for an easier installation. Abrasion and chemical resistant. UV resistant. Will not support combustion. UL Listed 486B Wire Connector. Meets or exceeds ANSI C119.4 Class A specifications. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. For use with copper and/or aluminum cables.
Item #: 0856899
CAT #: ISPC350-3
UPC: 662381789013
Company wide:
NSI Tork

Multi-Tap Connector, 6-Port, Black, Insulated, 350 MCM - 6 AWG, 1-Sided

Polaris™ Insulated Multi-Tap Connector, 6 Port (Single Sided Entry), 350 MCM - 6 AWG, 600 Volt, Black, Plastisol
Item #: 0263999
CAT #: IPL350-6
UPC: 662381914040
Company wide:
NSI Tork

POLARIS Mount Ins Multi-Tap 250 4 Port

4 Wire Polaris 250 MCM-6 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.
Item #: 0136875
CAT #: IPLMD250-4
UPC: 662381943026
Company wide:
NSI Tork

POLARIS Mount Ins Multi-Tap 500 12 Port

12 Wire Polaris 500 MCM-4 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.
Item #: 0250239
CAT #: IPLMD500-12
UPC: 662381945105
Company wide:
NSI Tork

POLARIS Mount Ins Multi-Tap 600 10 Port

10 Wire Polaris 600 MCM-6 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL7CU. Cold temperature rated to -45 degrees C, rated 600V, 75 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.
Item #: 0250240
CAT #: IPLMD600-10
UPC: 662381789228
Company wide:
NSI Tork

Polaris™ Insulated Multi-Tap Connector

Polaris™ Insulated Multi-Tap Connector, 3 Port (Dual Sided Entry and Mountable), 350 MCM - 6 AWG, 600 Volt, Black, Plastisol
Item #: 0667839
CAT #: IPLMD350-3
UPC: 662381944016
Company wide:
71 Items found