Starters & Contactors

PSTX210-600-70 Softstarter For Max 600V Main Voltage & 100 - 250V 50/60Hz Control Supply Voltage IEC Maximum of 210 Amp, 10 Inch Width, 19 Inch Height, 11 Inch Depth

Category: Advanced Control Softstarters

NEMA Size 2, Pump Panel, Irrigation, Rotary Disconnect, 50 Amp HMCPE Circuit Breaker, 10 Maximum Hp @ 240V, Electronic Overload Relay, 9 - 45 FLA (Full Load Amps), NEMA Type 3R, Rainproof, 240 Volt/ 60 Hz - 220 Volt/ 50 Hz Coil. Cover Control: Start and Reset Pushbuttons, Hand/Off/Auto Selector Switch. Dims: H: 29.10", W: 14.25", D: 8.47" ***Not rated for service entrance for PG&E***

Category: NEMA Size 2 Pump Panels

24V AC, Replacement Coil, Freedom Series. For use with NEMA Size 00 (Series B1 & C1) & IEC Frame Sizes A - C (Series B1 & C1).

Category: Starter & Contactor Replacement Coils

30 Amp, 2-Pole, Electrically Held, Open Type, NEMA Lighting Contactor, 600V Rated, 120 VAC/ 60 Hz - 110 VAC/ 50 Hz Coil

Category: Open Lighting Contactors

Front Auxiliary Contact with 2 N.O. & 2 N.C. Contacts. Used with Sequence C, Frame B-C IEC Contactors.

Category: Starter & Contactor Auxiliary Contacts

NEMA Size 2, Pump Panel, Irrigation, Rotary Disconnect, 50 Amp HMCPE Circuit Breaker, 25 Maximum Hp @ 480V, Thermal Overload Relay, NEMA Type 3R, Rainproof, 480 Volt/ 60 Hz - 440 Volt/ 50 Hz Coil. Cover Control: Start and Reset Pushbuttons, Hand/Off/Auto Selector Switch. Dims: H: 29.10", W: 14.25", D: 8.47"***Heater Pack required for Overload Protection. Not rated for service entrance for PG&E***

Category: NEMA Size 2 Pump Panels

(3) Terminal Lugs. Wire Range: 2/0 - 500 MCM. For use with AF Series, AF580 - AF1250 Frame Contactors. (Set of 3 lugs w/ 3 2/0-500mcm holes)

Category: Starter & Contactors - Terminal Lug Kits

40 Amp, XT Series Manual Motor Protector with Screw Terminals and Thermal & Magnetic Trip. Frame D, Class 10. 600V Rated, Continuous Amp Rating: 32.0 - 40.0.

Category: Manual Rotary Motor Controllers

ETN XTOE175GCS

Category: Overload Relays - Electronic Type

MMP Accessory Undervoltage Release, 480V @ 60Hz

Category: Manual Motor Protector Undervoltage Releases

PSTX AnyBus Adapter, 2 Port, Ethernet-IP

Category: Softstarter Communication Adapters

Contactor, Definite Purpose, C25 series, 40 Amp, 2-Pole, 1-Phase, 600 Volt AC, 208/240 Volt AC Coil, Open, Box Lugs

Category: 2-Pole Definite Purpose Contactors

12 Amp, 3-Pole, 600V Rated. IEC Full Voltage Non-reversing Contactor, XT Series, Frame B, with 1 N.O. Auxiliary Contact. 24 VAC/ 60 Hz - 24 VAC/ 50 Hz Coil.

Category: IEC Contactors - 0-16 Amp

MS165 MO165 3 PHASE BUSBAR 2 MMS

Category: Manual Motor Protector Busbars

25 Amp, 1-Pole, Compact Definite Purpose Contactor, 600V Rated, Binding Head Screw Terminals, 24V AC Coil. ***No Replacement Coils Available for the Compact Series***

Category: 1-Pole Definite Purpose Contactors

12 Amp, XT Series Manual Motor Protector with Screw Terminals and Thermal & Magnetic Trip. Frame B, Class 10. 600V Rated, Continuous Amp Rating: 8.0 - 12.0.

Category: Manual Rotary Motor Controllers

30 Amp, 4-Pole, Electrically Held, Open Type, NEMA Lighting Contactor, 600V Rated, 120 VAC/ 60 Hz - 110 VAC/ 50 Hz Coil.

Category: Open Lighting Contactors

Contact function 1 NO + 1 NC Rated operational voltage [Ue] 250 V AC Rated frequency [f] 50/60 Hz Rated current [Ie ] 6 A Conventional free air thermal current [Ith] 6 A Rated operational current AC--13 250 V [Ie ] 3 A Rated operational current DC-12 110 V [Ie ] 0.5 A Rated operational current AC-15 [Ie] 2 (250 V AC) A Rated insulation voltage [Ui] 250 V AC Minimum operating voltage per contact [Umin] 5 V DC Rated impulse withstand voltage [Uimp] 2.5 kV Rated conditional short-circuit current With 6 A back-up fuse [Isc] 1 kA Max. admissible back-up fuse Max. admissible back-up fuse 6 A gL Mechanical Standard front dimension 45 mm Enclosure height 80 mm Mounting width 8.8 (0.5 space unit) mm Mounting max. 2 x on MCB Degree of protection Integrated IP40 Terminal protection Protection against electric shock to IEC 536 Terminals Lift terminals Terminal capacities Solid 0.5 … 2.5 mm2 Terminal capacities flexible 0.5 … 2.5 mm2 Tightening torque of terminal screws ? 1.2 Nm

Category: Starter & Contactor Auxiliary Contacts

S811 Series Communicating Softstarter. Control Voltage: 24V DC. Load Voltage: 200 - 575V AC, 66 Amp, Non-Combination, 65 mm Frame Size. 15-Second Ramp, 4 Starts per Hour, 300% Current Limit @ 40 Degrees Celcius. Hp Ratings: 15 @ 200V, 20 @ 230V, 40 @ 460V. Includes: Internal Solid-State Overload Protection, Run Bypass Mode and Lugs. ***Must use C-H Power Supply***

Category: Advanced Control Softstarters

PSR Series Softstart (Compact style). 28.0 FLA (Full Load Amps). Motor Voltage: 208V - 600V AC. Control Voltage: 120V - 240V AC. Din-Rail/Screw Mountable. Requires: TA25 Series Overload Protection & DB25 Series Mounting Kit.

Category: Basic Control Softstarters

Side Mounted Base Auxiliary Contact Block. 1 N.O. Used with NEMA Size 4-5, IEC Size P-S.

Category: Starter & Contactor Auxiliary Contacts

25 Amp, 3-Pole, 600V Rated. IEC Full Voltage Non-reversing Contactor, XT Series, Frame C, with 1 N.O. Auxiliary Contact. 240 VAC/ 60 Hz - 220 VAC/ 50 Hz Coil

Category: IEC Contactors - 17-37 Amp

PSTX470-600-70 Softstarter For Max 600V Main Voltage & 100 - 250V 50/60Hz Control Supply Voltage, 14 Inch Width,19 Inch Height, 11 Inch Depth

Category: Advanced Control Softstarters

NEMA Size 2, Pump Panel, Combination, Flange Handle Disconnect, 50 Amp HMCPE Circuit Breaker, 10 Maximum Hp @ 240V, Thermal Overload Relay, NEMA Type 3R, Rainproof, 240 Volt/ 60 Hz - 220 Volt/ 50 Hz Coil. Cover Control: Start and Reset Pushbuttons, Hand/Off/Auto Selector Switch. ***Heater Pack required for Overload Protection*** Dims: H: 38.40", W: 18.86", D: 8.47"

Category: NEMA Size 2 Pump Panels