Starters & Contactors

Additional Coil Terminal Block.

Category: Starter & Contactor Accessories

3-Phase Busbar System. 65A, 600V Rated. For use with up to (2) MS116 or MS132 Series Manual Motor Protectors.

Category: Manual Motor Protector Busbars

1.3 - 1.7 Amp, IEC, Overload Relay, Type: Thermal Bi-Metallic, Trip Class 10. Selectable Manual or Automatic Reset. For use with AF Series, AF9 - AF38 Frame Contactors.

Category: Overload Relays - Thermal Type

Non-Reversing Combination Connection Kit. 600V Rated. Includes: DIN Rail Adapter Plate, Main Current Wiring. For use with B-Frame (0.1 - 32A) XTPR Rotary MMP with XTCE C-Frame Contactors

Category: Manual Motor Protector Connecting Links

1 N.O. / 1 N.C., Side Mount, Auxiliary Contact Block, A-Line Series, 600V Rated. For use with A9 - A75, AE9 - AE75, AL9 - AL40 Frame Contactors.

Category: Starter & Contactor Auxiliary Contacts

MMP Accessory Undervoltage Release, 120V @ 60Hz.

Category: Manual Motor Protector Undervoltage Releases

PSTX72-690-70 Softstarter For Max 690V Main Voltage & 100 - 250V 50/60Hz Control Supply Voltage IEC Maximum of 72 Amp, 6 Inch Width, 12 Inch Height, 8 Inch Depth

Category: Advanced Control Softstarters

440/480V AC, Replacement Coil, Freedom Series. For use with NEMA Size 0 (Series B1 & C1) & IEC Frame Sizes D - F (Series B1 & C1).

Category: Starter & Contactor Replacement Coils

Softstarter PSTX105-600-70 has a rated maximum operational current of 105 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard, lugs built in, good for up to 2/0

Category: Advanced Control Softstarters

90 Amp, NEMA Size 3, Non-Combination, Non-Reversing Starter, Freedom, 3-Pole, 3-Phase Magnetic, Thermal Overload Relay, NEMA Type 1, Indoor, 120 VAC/ 60 Hz - 110 VAC/ 50 Hz Coil. Cover Control: Reset Button. Must Add Class 20 Heater Pack.

Category: NEMA Size 3

Line Side Adapter. 600V Rated. For use with: Frame B XTPR Manual Motor Controls. Used to create a UL 508 Type E/F Manual Combination Starter

Category: Manual Motor Protector Connecting Links

B100 Series, NEMA 1 Enclosed, Pushbutton Operator, Manual Motor Starter. Provides Manual Control and Overload Protection, Includes a 3-Pole BiMetallic Overload Relay, Field Mounted Auxiliary Contacts, Lockout Device Standard, Frame Size M-0. 1 Hp @ 120V AC 1-Phase, 2 Hp @ 240V AC 1-Phase. 3 Hp @ 230V AC 3-Phase, 5 Hp @ 575V AC 3-Phase. Heater Unit Not Included; uses the FH Series

Category: Enclosed Manual Starters / Switches

2.5 Amp, XT Series Manual Motor Protector with Thermal Magnetic Trip. Frame B, Class 10. 600V Rated, Continuous Amp Rating: 1.6 - 2.5.

Category: Manual Pushbutton Motor Controllers

NEMA Size 1, Pump Panel, Combination, Flange Handle Disconnect, 30 Amp HMCPE Circuit Breaker, 10 Maximum Hp @ 480V, Thermal Overload Relay, NEMA Type 3R, Rainproof, 480 Volt/ 60 Hz - 440 Volt/ 50 Hz Coil. Cover Control: Start and Reset Pushbuttons, Hand/Off/Auto Selector Switch. ***Heater Pack required for Overload Protection*** Dims: H: 38.40", W: 18.86", D: 8.47"

Category: NEMA Size 1 Pump Panels

NEMA Size 4, Pump Panel, Combination, Flange Handle Disconnect, 150 Amp HMCP Circuit Breaker, 100 Maximum Hp @ 480V, Thermal Overload Relay, NEMA Type 3R, Rainproof, 480 Volt/ 60 Hz - 440 Volt/ 50 Hz Coil. Cover Control: Start and Reset Pushbuttons, Hand/Off/Auto Selector Switch. ***Heater Pack required for Overload Protection*** Dims: H: 48.40", W: 21.00", D: 8.97"

Category: NEMA Size 4 Pump Panels

3-Phase Commoning Link. 600V Rated. For use with (2) Frame B MMP's with No Side-Mounted Auxiliaries or Voltage Releases.

Category: Manual Motor Protector Busbars

1.00 - 1.60 FLA (Full Load Amps). MMP, 600V Rated, Trip Class: 10. Type MS116. Includes: Short Circuit Protection and Phase Failure Detection, Small 45 mm Width.

Category: Manual Rotary Motor Controllers

Contactor, Screw Terminal, 3 Pole, 25 Amp, Non-Reversing, 24-60V AC coil, 1 NO Auxiliary Contacts

Category: IEC Contactors - 0-16 Amp

PSR Series Softstart (Compact style). 24.2 FLA (Full Load Amps). Motor Voltage: 208V - 600V AC. Control Voltage: 120V - 240V AC. Din-Rail/Screw Mountable. Requires: TA25 Series Overload Protection & DB25 Series Mounting Kit.

Category: Basic Control Softstarters

208V AC, Replacement Coil, Freedom Series. For use with NEMA Size 1-2 (Series A1 & B1) & IEC Frame Sizes G - K (Series B1 & C1)

Category: Starter & Contactor Replacement Coils

400 General Purpose Amp, 600V Rated, 100-250 VAC/VDC Coil. AF-Line Series, 3-Pole, IEC Contactor with (1) N.O. & (1) N.C. Auxiliary Contact Block.

Category: IEC Contactors - 66-Over Amp

Terminal Shroud for Compression Lugs. For use with AF190 - AF205 Series Contactors. Includes: 2 Shrouds.

Category: Softstarter Terminal Shrouds

1 N.O, Front Mount, Auxiliary Contact Block, A-Line Series, 600V Rated. For use with A9/AE9/AL9 - A110/AE110/AL110 Frame Contactors.

Category: Starter & Contactor Auxiliary Contacts

9 Motor Current Amp, 25 General Purpose Amp, 3-Pole, 600 Volt AC Rated, 48 - 130 Volt AC/DC Coil. AF-Line Series, AF09 Frame, IEC Contactor with (1) N.O. Auxiliary Contact Block.

Category: IEC Contactors - 17-37 Amp