Search results

EMT Compression Connector, 2 Inch Diameter, Raintight and Concrete Tight, Steel

Category: Steel Raintight EMT Compression Connectors

Narrow Slot Wire Duct, H x W x L: 2" x 2" x 6', Gray, 5mm Slots, Item Does Not Include Cover ***SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT***

Category: High Density Wire Duct

Liquidtight Connector, 1-1/2 Inch, 90°, Malleable Iron With Zinc Chromate Finish, For Use With Metallic Liquidtight Conduit

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

Service Entrance Cap, Reducer Type, Conduit Size: 2". Weather Resistant, PVC. Includes: Female Slip Ends

Category: Service Entrance Caps - Non-Metallic

M18™ RedLithium™ Forge™ XC6.0 Battery Pack, Oil Resistance, Fuel Gauge, 3 Year Limited Warranty

Category: 18 Volt Cordless Tool Batteries & Chargers

8-1/8" Journeyman High-Leverage Diagonal Cutting Pliers, 2000 Series, Jaw Length: 13/16"

Category: Diagonal Cutting Pliers

AC Sensor, Capacity: 50-1000 Volts AC, Non-Contact

Category: Voltage Detectors

SWC 40116N NON-CONTACT AC VOL

Category: Voltage & Continuity Testers

Conduit Body, Type: LL, Size: 1/2", Material: PVC. Includes: Cover & Gasket.

Category: Type LL PVC Conduit Bodies

Ladder, Fiberglass, 300 LBS, 8ft Height, 12ft Reach, Yellow

Category: 300 Pound Rated Stepladders

General Purpose Relay, 8 Blade, DPDT, 24V ACGeneral Purpose Relay, 24V AC Coil, DPDT, Contact Rating: 15 Amp. Terminal Style: 8 Blade, Plug-In. Maximum Switching Voltage: 300V. Full Featured: Locking Pushbutton, LED, Removable ID Tag, Flag Indicator, Finger-Grip Cover.

Category: 8-Blade Ice Cube Relays

Level-Temp Controller, SPST-Normally Open, Heat/Cool, Conduit Hub or Screw Mount, Input Voltage: 240V AC, 0.2 Amp, SPST, Normally Open, Temperature Range: -20° to +140°F. For use with 2-Wire, 24V Thermostats.

Category: Thermostat Controllers

4" Square, Exposed Work Cover, Type: Single Receptacle (30A), 1/2" Raised, Drawn, Metallic. Cubic Inches: 7.3". Opening: 1.719".

Category: 4" Square Metallic Box Covers

Conduit Body, Type TB, Form 7, Diameter 1 Inch, Iron, For Use With Rigid Steel, Rigid Aluminum and IMC Conduit

Category: Type TB Iron Conduit Bodies

Bit Extension, Length: 18", Hex Shank Size: 7/16".

Category: Drill Bit Extensions

5-Piece Screwdriver Set, Includes: Keystone (1/4", Shank Length: 4", Square), Cabinet (3/16", Shank Length: 6"), Keystone (5/16", Shank Length: 6"), Phillips (#2, Shank Length: 4"), Cabinet (1/4", Shank Length: 6")

Category: Screwdriver Sets

Non-Metallic Cord Grip, Diameter: 3/4", Number of Holes: 5, Hole Diameters: 5mm. For use with 10 & 12 AWG USE-2.

Category: Solar Cord Grips

Heavy Duty Cable Tie, 15 Inch Long, UL Rated, 120 Pound Tensile Strength, PA66UV, Black, 100/PK

Category: Non-Releasable Cable Ties

Lay-In Type 1 Screw Cover Wireway, Straight Section, Size: 6 Inch Wide, 6 Inch Deep, 1 Foot Length, 16 Gauge Steel, ANSI 61 Gray Polyester Powder Paint Finish, No Knockouts

Category: Screw Cover Wireway

(3) 2 AWG Conductor and (1) 2 AWG Neutral, PE Insulation, ACSR Neutral, Palomino, Aluminum Multiplexed Overhead Service or Secondary Cable, Black, 600V.

Category: Aluminum Quadruplex Service Drop Cables

StrongHold™ Female Disconnect, nylon fully insulated, 12 - 10 AWG, .250 x .032 tab size.

Category: Female Nylon Insulated Wire Disconnects

350 MCM, THHN/THWN-2, Stranded Copper, 600V, Gray, 2500 ft Reel

Category: 350 MCM Stranded Copper THHN

FD Device Box, 1-Gang, Malleable Iron Ridge Top, Cast Box. Hub 3/4 Inch. Box Depth: 2.69 Inch Includes: Internal Ground Screw. For Use with Threaded Rigid Metal Conduit.

Category: 1-Gang Malleable Iron FS & FD Device Boxes

D914 Impact Tool, Features: Adjustable Spring Impact, Accept Phillips/Flat Screwdriver Blade, Includes: Hook and Spudger Tools, EverSharp 66 Blade, EverSharp 110 Blade, Phillips/Flat Screwdriver Blade

Category: Impact Punchdown Tools