Raceway Boxes

Will accommodate commercially available 15A or 20A duplex receptacles. Base has 1/2" and 3/4" concentric trade size KOs. Nonmetallic cover has 1500 and 2600 Series Raceway twistouts on all four sides. Two 1500WC Wire Clips included. Side wiring recommended. Gray finish. NOTE: Certified to Canadian Safety Standards. For sale in Canada. When ordering these products, add ôCö prefix to part number to denote the Canadian version, i.e ôC1546Bö.

Category: 1-Gang Raceway Duplex Receptacles

Steel, 1-Gang, Device Plate, Vertical Mounting, 6000 Series. Size: 2-1/2" Width. Ivory.

Category: 1-Gang Raceway Device Brackets & Plates

For covering unused compartments in the device bracket. White

Category: 1-Gang Raceway Box Covers & Faceplates

Non-Metallic, External Device Cover Plate, 5000 Series. Size: 6-3/8" Length, 5-3/16" Width, 9/16" Height. PVC, White.

Category: 1-Gang Raceway Device Brackets & Plates

Steel, 2-Gang, Rectangle Opening and Modular Opening Cover, 4000 Series. Size: 5-1/8" Length. Ivory.

Category: 2-Gang Raceway Box Covers

Installs commercially available 15A and 20A rectangular receptacles into 3000 Series Raceway. G3007C Device Bracket included. NOTE: Certified to Canadian Safety Standards for sale in Canada. When ordering these products, change the "V" color prefix to "CV" or the "G" color prefix to "CG" to denote the Canadian versions. Gray

Category: 1-Gang Raceway Device Brackets & Plates

Non-Metallic, 2-Gang, Deep Divided Box, 2300 Series. Size: 4-7/8" Length, 4-3/4" Depth, 2-1/4" Width. PVC, Ivory.

Category: 2-Gang Raceway Device Boxes

Accepts rectangular GFCI, Surge and Decorator style devices, modular furniture adapters and RJ45s. Does not accept 5507 Series Faceplates. NOTE: Certified to Canadian Safety Standards for sale in Canada. When ordering these products, change the "V" color prefix to "CV" or the "G" color prefix to "CG" to denote the Canadian versions. Gray

Category: 2-Gang Raceway Box Covers

Steel, Junction Box. 2600 Series. Size: 5" Diameter, 1" Height. Includes: 1/2", 3/4" KOs, (2) 2600WC Wire Clips. Paintable Galvanized Finish.

Category: Round Raceway Junction Boxes

Steel, 2-Gang, Single Round Opening Cover, 4000 Series. Size: 1.39" Diameter. Ivory.

Category: 2-Gang Raceway Box Covers

Steel, 1-Gang, Single Pole Switch & Box, 500, 700 Series. Size: 1-3/8" Depth. Includes: (1) Single Pole Switch 15A, 125V. Ivory.

Category: 1-Gang Single Pole Raceway Switches

Non-Metallic, Low-Voltage Blank Plate, 5000 Series. Size: 4-7/32" Length, 1-1/2" Width. PVC, White

Category: 1-Gang Raceway Box Covers & Faceplates

For power or communication devices in a single compartment. For use with 5507 Series Faceplates, Ortronics TracJack and Series II Modules, Pass and Seymour Activate Series Inserts, and Wiremold Open System Communication Modules. NOTE: CM-EPLA End Plates are required when using Wiremold communication modules and Pass and Seymour Activate inserts. S2-EPL End Plates are required when using Orthonics Series II Inserts. To mount TracJack inserts, use 5507-4TJ or 5507-6TJ Faceplates. White

Category: 1-Gang Raceway Device Brackets & Plates

1/2" trade size KO in center. For use with 5735, 5737, 5737A, 5738, 5738AF, 5739, 5739A, or 2135 Device Boxes. Converts these boxes into pull or junction boxes for hanging lightweight pendant fixtures with 1/2" trade size pipe stems. White

Category: Round Raceway Open Base Boxes & Covers

WMD V2444D-2N 2G DIVIDED BOX

Category: 2-Gang Raceway Device Boxes

Double Gang Two-Piece Screw Together Deep Outlet Box, Accepts Pan-Way® Screw-On Faceplates Or Any NEMA Standard Double Gang Faceplate, For Use With Pan-Way® T-45 Or LD Profile Raceway, 5.19"L x 5.19"W x 2.75"H (131.9mm x 131.9mm x 69.8mm). Breakouts for 1/2", 3/4", or 1" Diameter Conduit

Category: 2-Gang Raceway Device Boxes

Device mounting bracket, PVC, Gray, Used to mount NEMA standard single gang electrical outlets and communication devices with either screw-on or snap-on single gang faceplates. Can be used with T-70, Twin-70, and TG-70 raceway.

Category: 1-Gang Raceway Device Brackets & Plates

Non-Metallic, 2-Gang, Device Box, Size: 4-7/8" Length, 4-3/4" Width, 1-3/4" Depth, PVC, Ivory

Category: 2-Gang Raceway Device Boxes

Installs commercially available 15A and 20A rectangular receptacles into 3000 Series Raceway. G3007C Device Bracket included. NOTE: Certified to Canadian Safety Standards for sale in Canada. When ordering these products, change the "V" color prefix to "CV" or the "G" color prefix to "CG" to denote the Canadian versions. Ivory

Category: 1-Gang Raceway Device Brackets & Plates

Single gang two-piece screw together outlet box. Box accepts Pan-Way« Screw-On Faceplates or any NEMA standard single gang faceplate. For use withPan-Way« LD profile raceway. 5.19in L x 3.45in W x 1.75in H (131.9mm x 87.7mm x 44.4mm). Breakouts for 1/2in, 3/4in, or 1in diameter conduit, White.

Category: 1-Gang Raceway Device Boxes

Installs commercially available straight blade and locking single receptacles with face diameters of 1.56" - 1.57" (approximately (40mm)) into 3000 Series Raceway. G3007C Device Bracket included. NOTE: Certified to Canadian Safety Standards for sale in Canada. When ordering these products, change the "V" color prefix to "CV" or the "G" color prefix to "CG" to denote the Canadian versions. Gray

Category: 1-Gang Raceway Device Brackets & Plates

3-Sided Hanging Box, Snap-On/Screw/On, For T-70, PVC, International Gray

Category: 1-Gang Raceway Device Boxes

Steel, 2-Gang, Utility Box, 3000 Series. Size: 1-7/8" Depth. Ivory.

Category: 2-Gang Raceway Device Boxes

Steel, 1-Gang, Divided Over Raceway Box, 2400 Series. Size: 2-3/4" Depth. Ivory.

Category: 1-Gang Raceway Device Boxes