Conduit, Duct, & Raceway

Non-Metallic, Flexible Corduct. 1200 Series. Size: 5' Length, 2-1/2" Width, 14/32" Height. Color: Black.

Category: Non-Metallic Overfloor Raceway

Aluminum, 90° Flat Elbow, AL Series. Size: 3" Outside, 1-9/16" Inside. Includes: (2) Couplings. Aluminum.

Category: Small 2-Piece Metallic Raceway Elbows

Non-Metallic, 1-Gang, Power Box, Size: 4-3/4" Length, 3" Width, 1-3/4" Depth, PVC, Ivory

Category: 1-Gang Raceway Device Boxes

2-1/2 Inch PVC 90 Degree Elbow, Schedule 80, Gray

Category: Schedule 80 90° Elbows

CCD S60300RC00 3/8" SS316 ROD COUPLING

Category: Threaded Rod Couplings

3/4 Inch PVC 45 Degree Elbow, Schedule 40, Gray, Bell End

Category: Schedule 40 45° Elbows - Bell End

Wiring Duct Cover, Protective Film, for 1" Wide PANDUCT Wiring Duct, Lead-free PVC, White, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Wire Duct Covers

Layin Flat-Cover Type 1 Straight Sections are used for enclosing wire and cable in wireway runs. This Straight Section Layin Flat Cover Type 1 KOs, F88T124GVWK item measures 8x8x24in with material of Steel finish Galvanized.

Category: Screw Cover Wireway

Deep Strut - Elongated Holes on Back, Height: 1-5/8", Width: 1-5/8", Material: Steel, Finish: Pre-Galvanized, Gauge: 12, Length: 10 feet. Color: Green

Category: Steel Strut with Elongated Holes

Non-Metallic, Twin Snap Wire Clip, 5400 Series. Size: 2-5/8" Length. PVC, Ivory.

Category: 2-Piece Non-Metallic Raceway Clips & Couplings

Panduct® Type FS Solid Wall Wiring Duct, 2.25" W x 2.14" D x 6' L, PVC, Light Gray, no mounting holes. Base only does not include cover.

Category: 2-Piece Non-Metallic Raceway

1-1/2" Diameter, 90° Elbow, PVC Coated, Rigid Conduit, Material: Hot-Galvanized Steel, Black PVC Exterior Coating.

Category: PVC Coated Rigid Conduit Elbows

Wireway, Type 1, Hinged Cover, Lay-In, Straight Section, Size/Dims: 4.00x4.00x72.00, Material/Finish: Steel/Gray. No Knockouts.

Category: Hinged Cover Wireway

Wire Trough, Type 12, Hinged Cover, Straight Section, Size/Dims: 12.00x12.00x60.00, Material/Finish: Steel/Grey

Category: NEMA 12 Wire Trough

OFR Series Overfloor Raceway Wire Clips

Category: Metallic Overfloor Raceway Clips & Couplings

Wireway, Type 1, Hinged Cover, Lay-In, Size/Dims: 6" x 6" x 12", Material/Finish: Steel/Gray. Includes Knockouts.

Category: Hinged Cover Wireway

Steel, 2-Gang, Device Plate, 4000 Series. Size: 5-1/8" Length. Ivory.

Category: 2-Gang Raceway Box Covers

DIN Rail, High Rail - 90°, Non-Slotted, DIN 3. Type: PR3.Z2 HR90 ALU. Material: Extruded Aluminum with prepunched 22.5mm feed through holes and prepunched mounting holes. Length: 2 Meters. H x W: 15mm x 35mm.

Category: High DIN Rail

Connectrac GO 12’ kit w/ Clear Anodized finish, 180” flexible cord w/ plug & 15A duplex receptacle

Category: Non-Metallic Overfloor Raceway

1 Inch EMT 22-1/2 Degree Elbow

Category: EMT 22-1/2° Conduit Elbows

Two equal compartments - Base accepts single or Twin Snap Cover. 5400 Series raceway is available in 8' (2.4m) lengths with pre-punched mounting holes, packed 48' (14.6m) per carton. White

Category: 2-Piece Non-Metallic Raceway

ABB Din-rail Adapter Kit With One Dummy Block.

Category: DIN Rail Mounting Brackets

3/8" Diameter, Reduced Wall Steel Conduit, Metallic, Hot Dipped Zinc Galvanized Low Carbon Steel, 100 feet Coil.

Category: Flexible Steel Conduit

Steel, Divider, 6000 Series. Size: 5' Length, 3-1/4" Height. Galvanized. Package Quantity: 4.

Category: Large 2-Piece Metallic Raceway Dividers