Search results

6x4 Horizontal Tee Fitting, 90° Horizontal Branch, H: 4.22", W: 10.77", Accepts optional split cover FRTSC6YL

Category: Tees, Crosses & Junctions

The black powder coated bracket is 2.41" (61.2 mm) high, 21.0" (533.4 mm) long, 2.04" (51.8 mm) wide, and 21.0" (533.4 mm) deep. It is designed to support an 18" (457.2 mm) wide Wyr-Grid® Pathway from the ceiling using a pair of 1/2" (12 mm) threaded rod

Category: Wire Duct Clips / Retainers

Pre-assembled 4in x 4in QuikLock™ coupler quickly joins two sections of channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 3/8in nut driver to allow coupler to be removed if necessary, Yellow, 1 piece.

Category: Couplers & Joiners

The Wyr-Grid® black powder coated, snap-on sidewall is 4.0" (102 mm) high and can be attached anywhere along the pathway to retain cables. It comes in standard packages of one.

Category: Wire Duct Clips / Retainers

The Wyr-Grid® black powder coated, snap-on sidewall is 2.0" (50 mm) high and can be attached anywhere along the pathway to retain cables. It comes in standard packages of one.

Category: Wire Duct Clips / Retainers

The black powder coated bracket is 2.41" (61.2 mm) high, 33" (838.2 mm) long, 2.04" (51.8 mm) wide, and 33" (838.2 mm) deep. It is designed to support a 30" (762 mm) wide Wyr-Grid® Pathway from the ceiling using a pair of 1/2" (12 mm) threaded rod drops.

Category: Wire Duct Clips / Retainers

The Wyr-Grid® 12" (304.8 mm) FiberRunner® QuikLock™ Trapeze Bracket is made of steel and is black powder coated. It is 12.2" (309.9 mm) high, 12.7" (321.6 mm) long, 2.3" (58.4 mm), and 12.7" (321.6 mm) deep. It attaches to the Wyr-Grid® 12" (304.8mm) wide

Category: Cable Tray Trapeze Hangers

The pre-galvanized metal divider wall in gray is 6.0 (152 mm) high. It is used to provide cable separation on the Wyr-Grid® overhead cable tray routing system's pathway sections. It is designed to help route and manage copper, fiber optic, or power cables

Category: Wall Duct Dividers

The Wyr-Grid® Pathway Section protects cables between the Main Distribution Area and the Equipment Distribution Area. Unlike other pathways, it installs quickly and can be modified easily, optional sidewalls snap on without extra hardware or tools. Splice

Category: Straight Wire Basket

The black powder coated trapeze bracket 0.72" (18.3 mm) high, 12.5" (317.5 mm) long, 2.04" (51.8 mm) wide, and 12.5" (317.5 mm) deep. It is used to support an 8" (203.2 mm) wide Wyr-Grid® Pathway from the ceiling using a pair of 1/2" or (12 mm) threaded r

Category: Wire Duct Clips / Retainers

Black powder coated Wyr-Grid® 4" (50mm) high Snap-On Intersection Bend Radius Control provides 3" (76mm) bend radius control and can be installed without cutting or fabrication at tees, crosses, and right angle intersections.

Category: Wire Duct Clips / Retainers

Black powder coated Wyr-Grid® 6" (50mm) high Snap-On Intersection Bend Radius Control provides 3" (76mm) bend radius control and can be installed without cutting or fabrication at tees, crosses, and right angle intersections.

Category: Wire Duct Clips / Retainers

The black powder coated bracket is made of steel and is 2.44" (61.98 mm) high, 6.05" (153.67 mm), long, 3.12" (79.25 mm) wide, and 6.05" (153.67 mm) deep. It is used to support the end of the 8.0" (203 mm) Wyr-Grid® Pathway against a vertical surface suc

Category: Wire Duct Clips / Retainers

The flat, pre-galvanized metal liner in gray is 24" (609.6 mm) wide and 63" (1600.2 mm) long. It is used to provide a flat surface for routing cables on the Wyr-Grid® pathway sections. It comes in standard packages of one.

Category: Wire Duct Clips / Retainers

The pre-galvanized metal divider wall in gray is 4.0 (102 mm) high. It is used to provide cable separation on the Wyr-Grid® overhead cable tray routing system's pathway sections. It is designed to help route and manage copper, fiber optic, or power cables

Category: Wall Duct Dividers

Intersection Bend Radius Control, 2" HigThe Wyr-Grid® black powder coated, snap-on intersection bend radius control is 2.0" (50 mm) high, 8.2" (208.4 mm) long, and 8.2" (208.4 mm) wide. It provides 3.0" (76 mm) of bend radius control and can be installed without cutting or fabrication at tees,

Category: Wire Duct Clips / Retainers

The Wyr-Grid® Cantilever Bracket is black powder coated and is used to support the 18" (457.2 mm) Wyr-Grid® Pathway along a wall. It is 6.9" (175.3 mm) high, 20.7" (525.8 mm) long, 2.2" (56.4 mm) wide, and 20.7" (525.8 mm) deep and has an integral retaini

Category: Wire Duct Clips / Retainers

Used to route cable into one or two pieces of 1.5 (38mm) diameter split corrugated tubing. Requires coupler to be used with 4x4 FiberRunner®Fitting. Used with any 4x4 FiberRunner®Fitting.

Category: Drop-Offs, Spillouts & Outlets

The FiberRunner® 4x4 Spill-Over Fitting Cover is used to fully enclose 4x4 channel in conjunction with the 4x4 spill-over junction. The spill-over junction cover snaps onto the channel base. It has a hinged feature that allows easy access to add or remove cables.

Category: Drop-Offs, Spillouts & Outlets

The Wyr-Grid® Cantilever Bracket is black powder coated and is used to support the 24" (609.6 mm) Wyr-Grid® Pathway along a wall. It is 6.9" (175.3 mm) high, 26.7" (678.2 mm) long, 2.2" (56.4 mm) wide, and 26.7" (678.2 mm) deep and has an integral retaini

Category: Wire Duct Clips / Retainers

The black powder coated straight splice connector is 1.57" (39.8 mm) high and quickly joins two 8" (203 mm), 12" (305 mm), or 18" (457 mm) wide Wyr-Grid® Pathways together. A thread cutting screw pierces through the paint of adjacent pathway sections to p

Category: Wire Duct Clips / Retainers

The Wyr-Grid® Pathway Section protects cables between the Main Distribution Area and the Equipment Distribution Area. Unlike other pathways, it installs quickly and can be modified easily, optional sidewalls snap on without extra hardware or tools. Splice

Category: Straight Wire Basket

The black powder coated intersection splice connector is 3.01" (76.4 mm) high, 3.30" (81.3 mm) long, and 1.35" (34.2 mm) wide and quickly joins Wyr-Grid® Pathways at all intersections. A thread cutting screw pierces through the paint of perpendicular path

Category: Cable Tray Fast Splicers

The black powder coated bracket is 2.41" (61.2 mm) high, 28.5" (723.9 mm) long, 2.04" (51.8 mm) wide, and 28.5" (723.9 mm) deep. It is designed to support a 24" (609.6 mm) wide Wyr-Grid® Pathway from the ceiling using a pair of 1/2" (12 mm) threaded rod d

Category: Wire Duct Clips / Retainers