"nema box 36 x 36 x 18"

Bolt Kit, (2) 3/8" X 2-1/2" Penta Head Bolts With Speed Nut - E02, For New N9 Box

Category: Underground Enclosure - Accessories

Fan Shroud, Type 3R (2 pack), Size/Dims: 8.00" x 8.00", Material/Finish: Steel

Category: Enclosure Cooling Fan Shroud Kits

Recessed Floor Plate Assembly, 2 outlets, Box-Steel, Gasket-Neoprene, Nickel Silver material, 4.5 x 2.79 x 4.08 in. Size, Gray, Water Tight Assembly construction, Bottom, Side cable entry, Floor Mount, 1/2 in. knockouts

Category: Assembled Recessed Gang Boxes

Wall-Mount Enclosure, NEMA 4X, Hinge Cover, 36 Inch x 24 Inch x 12 Inch, Stainless Steel

Category: Stainless Steel Wall Mount Enclosures

Low Voltage Partition for 4" Square Box, Metallic. Fits: 1-1/2" & 2-1/8" Deep Boxes.

Category: 4" Square Metallic Box Partitions

8" Diameter, Mounting Block, Non-Metallic. Fan Weight: 70 lbs. Fixture Weight: 200 Includes: (2) #10 x 3" Wood Screws, (1) #8 x 1-1/2" Wood Screw, (2) Lock Washers, (1) NM94 Non-Metallic Cable Connector.

Category: Round Non-Metallic Ceiling Pans

8" x 10" Blank TV Box Cover, Fits TVBS810 or TVBU810, White

Category: Recessed Home Entertainment Boxes

Underground Enclosure Composite R-Series Lid, 13-3/4" x 23-1/4" x 2" Skid Resistant, Marked "Electric", Concrete

Category: Concrete Underground Pull Box Covers

Enclosure, Screw Cover, NEMA 3R, No Knockouts, 48 x 36 x 16 Inch, Steel/Gray Finish

Category: NEMA 3R Screw Cover Enclosures

Steel City® 58-C-1 Blank Utility Outlet Box Cover, 4 in L x 2-1/8 in W, Steel

Category: Metallic Handy Box Covers

Panel for Medium Type I Enclosure Size: 30" x 30", Size/Dims: 26.00x28.50, Perforated Panel, Material/Finish: Steel

Category: Enclosure Back Panels

Handy Box Cover, Type: Blank, Drawn, Metallic. Fits: 3-3/4" x 1-1/2" Handy Boxes.

Category: Metallic Handy Box Covers

Plumbing, Gas & HVAC Flashing Panel for Wall Penetration, Fits 2 Inch to 2-1/2 Inch Pipes (Copper, Rigid, PVC), 11-1/8 Inch x 11-1/8 Inch x 3/32 Inch. Also used with electrical pipes through brick and stone veneers

Category: Weatherproof Box Flashing Panels

5" Square x 2.875" Deep Metal Box with Cable Management, Side KO's: (1) 1/2", (1) 3/4", & (1) 1" Each Side, (1) 1/2" on Back.

Category: 5" Square Metallic Boxes

Fits 1 1/2" to 1 3/4" sized pipes - copper, rigid, and PVC and ABS. Also used with electrical pipes through brick and stone veneers. 11 1/8" x 11 1/8" x 3/32"

Category: Weatherproof Box Flashing Panels

5" Square x Single Gang Extension Ring

Category: 5" Square Metallic Box Rings

Free-Standing Enclosure, One Door With Three Point Latch, Single Access, NEMA 4X, 90 x 36 x 24 Inch, Stainless Steel

Category: NEMA 4X Floor Mount Disconnect Enclosures

Panel for Enclosure, 40.20 x 28.20 Inch, Size: Fits 42 x 30 Inch, Material/Finish: Steel/Galvanized

Category: Enclosure Back Panels

Used on 5/8" Depth 3-Coat Stucco and Lap Siding. Fits Specified Electrical 4/0 Plastic Boxes Only. 11 1/8" x 11 1/8" x 3/32"

Category: Weatherproof Box Flashing Panels

Floor Box w/ Brass Cover, Rectangular, Floor Mount, Dimension: 4.125" Width x 3.738" Depth x 6" Height, Non-Metallic Construction w/ Brass Metal Covers. Includes: Connector, Cover Plates, Screws, Back Plate & Flip Lids.

Category: Assembled Recessed Gang Boxes

Panel For Enclosure, 33 x 33 Inch, Type 3R, 4, 4X, 12/13, Steel, White Powder Coat Finish

Category: Enclosure Back Panels

SWB Series Aluminum Dead-End Single-Gang Device Body, For Use With XCS/XS/XT Cover Assemblies, 1 Inch Hub Size, 7.75 in x 3.5 in x 3.5 in

Category: 1-Gang Aluminum FS & FD Device Boxes

Flashing Panel, Used on 3-Coat Stucco & Lap Siding, Rise: Flat, Fits Specified Pancake 4/0 Metal Boxes (See Compatibility Chart), 11-1/8" x 11-1/8" x 3/32".

Category: Weatherproof Box Flashing Panels

Mounting Block, 5" x 7", For Dutch Lap Siding, White

Category: Weatherproof Box Mounting Kits